Professional Documents
Culture Documents
CROCHET PATTERN
Ho Ho Ho, Santa Claus is coming to town!!! Crochet this 13" Amigurumi Santa Claus Doll
from the free crochet pattern. We love how the Santa design has turned out, we
particularly love the fullness of the ruffled beard.To complete a full set of Christmas decor,
the Santa Clause Doll crochet pattern comes with the Santa's Gift Sack and Gift Boxes too.
Crochet Santa Claus Doll: 13" tall including the floppy Santa's Hat
Crochet Santa Sack: 4" W x 6" H
Crochet Gift Boxes: 2" x 2" x 2". You can adapt the method to crochet for other sizes
The pattern may look tedious as there are lots of parts to make, however, they are actually
not difficult to follow. We have made it achievable by including all the pictures to show you
the important instructions so you will have clearer ideas.
MATERIALS
AMIGURUMI SANTA CLAUS
Acrylic yarn, DK/Light Worsted Weight. Color in Red (100-gram ball), Beige, White,
Pink, Yellow, and Black.
Embroidery Floss, Black
Wired Eyeglasses
Polyester fiberfill
SANTA SACK
Acrylic yarn, DK/Light Worsted Weight. Color in Brown, and Red.
GIFT BOXES
Acrylic yarn, DK/Light Worsted Weight. Color in Green, White, and Red.
Metallic Gold Lace Thread Yarn Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 1/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
TOOLS
2.5mm crochet hook
Stitch Markers
Tapestry Needle
Fabric marker (water erasable)
Scissors
Pins
INSTRUCTIONS
AMIGURUMI SANTA CLAUS CROCHET PATTERN
Abbreviations(In US Crochet Terms)
ch: chain
sk: Skip
SANTA'S SUIT
The Santa's Suit pattern is made by joining the white trim to the body (at Round 18, begin
at stitch 47 of the round, and end at stitch 45 of Round 19) to create Santa's suit.
Trim
Leave enough yarn length for sewing, at least 6" long, before making your slip knot to
begin the pattern.
Foundation Row: ch 3
Row 23 - 24: ch2 (count as 1 st), hdc in next 64 sts, turn. {65}
Body
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 2/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Round 1: ch5, Inc in 2nd ch from hook, sc 2, 5sc in the last ch. Continue on the other side of
the chain base, sc 2, 3sc in the last ch. {14}
Round 3: Inc, sc 6, [Inc] 2 times, sc, Inc, sc 6, [Inc] 2 times, sc. {26}
Round 4: Inc, sc 8, [Inc, sc] 2 times, Inc, sc 8, [Inc, sc] 2 times. {32}
Round 5: Inc, sc 10, Inc, sc 2, Inc, sc, Inc, sc 10, Inc, sc 2, Inc, sc. {38}
Round 6: Inc. sc 12, [Inc, sc 2] 2 times, Inc, sc 12, [Inc, sc 2] 2 times. {44}
Round 7: Inc, sc 14, Inc, sc 3, Inc, sc 2, Inc, sc 14, Inc, sc 3, Inc, sc 2. {50}
Round 8: Inc, sc 16, [Inc, sc 3] 2 times, Inc, sc 16, [Inc, sc 3] 2 times. {56}
Round 18: sc 46. Begin at st 47, add trim to the body by sc together the trim to the body:
First, insert the hook between the 3rd and 4th hdc post at row 23 of the trim, then, insert
the hook to the FL of st 47 of the body. Yarn over, draw through the loops to make an sc
stitch. Repeat this for the next 62 stitches.
Round 19: Continue to sc around as usual after the trim is added. {64}
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 3/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
HEAD
NOSE
Make with Pink yarn:
EYEBROWS
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 4/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Foundation row: ch 5,
MUSTACHE
Row 1 ( Work this row in the back bump of the foundation row): slst in 2 ch from hook, [sc,
hdc, dc 3, hdc, sc, slst] repeat 2 times.
BEARD
Make with White Yarn. The beard is constructed with 4 layers of ruffles.Leave enough yarn
length for sewing, at least 8" long before making your slip knot to begin the pattern.
Layer 1: [pic 1]
Row 1 (RS): (Work in the FL of the foundation row): Begin at 3rd st from hook [2dc, dc]
repeat 2 times, 2dc, ch2, slst, [ch2, (2dc, dc) repeat 2 times, 2dc, ch2, slst] repeat 4 times,
turn.
After making this row, you have completed a layer of 5 wide segments of beard pattern.
Layer 2: [pic 2 - 4]
Foundation Row (WS, work this row on the foundation row of layer 1): ch 3, sk 2, hdc, [ch 5,
sk 5 sts, hdc] repeat 4 times, ch 3, sk 2, slst, turn.
Row 1 (RS): ch 2, dc 4 in ch sp, ch 2, slst to hdc st of the foundation row, [ch 2, dc 8 in ch sp,
ch 2, slst to hdc st] repeat 4 times, ch 2, dc 4 in ch sp, ch 2, slst to hdc st, turn.
After making this row, you have completed a layer of 4 wide segments of beard pattern
with a narrower segment at each end respectively.
Layer 3: [pic 5 - 6]
Foundation Row (WS, work this row on the foundation row of layer 2): [ch 7, hdc to the
center of the wide segment] repeat 4 times, ch 7, slst to the last st, turn.
Row 1 (RS): [ch 2, dc 10 in ch sp, slst to hdc st of the foundation row] 5 times, turn.
After making this row, you have completed another layer of 5 wide segments of beard
pattern.
Layer 4: [pic 7 - 8]
Foundation Row (WS, work this row on the foundation row of layer 3): ch 4, hdc to the
center of the segment, [ch 7, hdc to the center of the next segment] repeat 4 times, ch 4,
slst to the last st, turn.
After making this row, you have completed another layer of 4 wide segments of beard
pattern with a narrower segment at each end respectively.
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 5/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Belt
ch 1, sc 64, slst.
Buckle
Round 1: [slst in next 5 sts, ch 2, slst in next 3 sts, ch2] repeat 2 times.
Fasten the yarn end to the first slst st of the round
The Arms are made by joining a white sleeve cuff piece to the hand pattern. Then,
continue to crochet the sleeve with red yarn to make up the arms.
Sleeve Cuffs
Round 1 - 2: ch 2 (count as 1 st), hdc 23, slst to the first st. {24}
Hands
Sleeves
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 6/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Row 1: Place hand-piece into the cuff piece, position to get the first stitches aligned.
Insert the hook between the 1st and 2nd hdc post of the cuff, then, insert the hook to the
FL of the hand. Yarn over, draw through the loops to make an sc stitch. Repeat around. {24}
Fill the bottom 2/3 of the arms firmly with polyester fiberfill.
LEGS
The Legs are made by joining a hem to the shoe pattern. Then continue to crochet the
pants with red yarn to make up the legs.
Shoes
Make 2. Begin with Black Yarn
Round 1: ch5, Inc in 2nd ch from hook, sc 2, 5sc in the last ch. Continue on the other side of
the chain base, sc 2, 3sc in the last ch. {14}
Round 3: Inc, sc 6, [Inc] 2 times, sc, Inc, sc 6, [Inc] 2 times, sc. {26}
Round 4: Inc, sc 8, [Inc, sc] 2 times, Inc, sc 8, [Inc, sc] 2 times. {32}
Round 5: Inc, sc 10, Inc, sc 2, Inc, sc, Inc, sc 10, Inc, sc 2, Inc, sc. {38}
Round 6: Inc. sc 12, [Inc, sc 2] 2 times, Inc, sc 12, [Inc, sc 2] 2 times. {44}
Round 11: sc 14, Inv dec, sc 12, Inv dec, sc 14. {42}
Round 12: sc 14, Inv dec, sc 10, Inv dec, sc 14. {40}
Pants
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 7/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Round 2: Place shoe piece into the pant piece, adjust to get the first stitches aligned.
Insert the hook through the loops of the first stitch, then, insert the hook to the FL of the
shoe, crochet both pieces together with an sc stitch. Repeat around. {30}
Fill the bottom 2/3 of the legs firmly with polyester fiberfill.
ch: chain
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 8/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 9/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Make a mini pom-pim and sew or glue to the tip of the hat. Learn quick and easy way to
make mini pom pom with fingers.
Sew to attach the beard to the face of the Santa doll. The sides of the beard are set at
Round 15 high and the center is at Round 19.
Sew the mouth with pink yarn between the beard and the mustache.
Sew the Santa Belt to the body, then sew the head to the body. Follow by sewing the
arms at the sides of the neck.
sk: skip
Sack
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 10/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Round 43: ch, sc, [ch 2, sk 2, sc 2] repeat 17 times, ch 2, sk 2, sc, slst, turn. {72}
Drawstring
With Red Yarn, crochet ch st until it is about 18 long. Fasten off.
Draw through the string at chain spaces created at Round 43 of the sack.
Make 2 knots at the ends, trim off excess loss yarn. You may put some glue to prevent the
end from coming off.
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 11/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Base:
Continue to crochet the sides of the gift box by picking 10 sts from each side.
Sides:
Top:
Insert a 1.75" x 1.75" x 1.75 box into it and sew the Top flap to the edges of the side.
With gold yarn, crochet ch st until it is 24" long, fasten off.
NOTES
Depending on the speed and hours you are spending on the project, the total time needed
is only an approximation.
Stuff the parts firmly and densely to give your amigurumi doll a good shape.
You are allowed to crochet and sell Santa Claus Doll on small-scale production. However,
you are not allowed to publish the patterns and pictures in any form without the prior
written permission of Craft Passion.
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 12/13
24/12/2021, 14:25 Amigurumi Santa Claus Doll Crochet Pattern - Craft Passion
Privacy - Terms
https://www.craftpassion.com/wp-json/mv-create/v1/creations/373/print 13/13