Professional Documents
Culture Documents
ifm products
ifm.com
Position sensors
Inductive sensors
Electromagnetic field immune Kplus sensors for welding areas 6 - 7
Inductive M8 sensor for limited space 8 - 9
They could hardly be smaller: inductive sensors in M8 design 10 - 11
Huge IO-Link performance in a tiny M8 housing 12 - 13
Twice as good: inductive sensors with analogue output and IO-Link 14 - 15
Ultrasonic sensors
Robust full-metal ultrasonic sensor for harsh environments 16 - 17
Photoelectric sensors
Measuring light grids for easy object monitoring in intralogistics 18 - 19
Encoders
A safe choice: draw-wire mechanisms for encoders 22 - 23
Industrial imaging
Vision sensors
The new Dualis: pays attention to every detail of surfaces and contours 24 - 25
Illumination
Flexible LED strip for illumination and signalling 26 - 27
Ultra-flat backlight for vision sensors 28 - 29
Process sensors
Pressure sensors
Front flush miniature pressure sensor with G1/4 process connection 30 - 31
With E1 approval: Pressure transmitters for mobile machines 32 - 33
Level sensors
Precise & convenient: radar level sensor with IO-Link 38 - 39
Analytical sensors
For pure water: measure conductivity from 0.04 µS/cm 40 - 41
The new versatility: conductivity measurement in any pipe size 42 - 43
3
Industrial communication
edgeDevices
edgeGateway: Reliable connection between sensors and IT 46 - 47
edgeController: an all-rounder, which leaves nothing to be desired 48 - 49
IO-Link
IO-Link masters
IO-Link master: Connection of sensors to the PLC and to the IT world 52 - 53
IO-Link master for intelligent sensors in the control cabinet 54 - 55
IO-Link devices
Mobile data memory for IO-Link: small in size, big in space 56 - 57
Identification systems
RFID UHF
No compromises: robust UHF evaluation system for harsh environments 58 - 59
RFID Systems
RFID for Industry 4.0: IoT solutions with direct connection to the IT infrastructure 60 - 61
I/O modules
ioControl – rugged I/O module with integrated controller 64 - 65
4
Connection technology
Power supplies
24 V DC Power supplies
Intelligent power supply directly in the field 70 - 71
moneo
moneo
moneo. The all-you-want software for industrial evolution 74 - 79
ifm
ifm
ifm system sales – solutions for your installation from a single source 80 - 81
The ifm sales platform 82 - 83
5
Position sensors
Electromagnetic
field immune
Kplus sensors for
welding areas
Inductive sensors
6
Type Total length Sensing range Installation Switching frequency Current rating Order
no.
[mm] [mm] [mm] [Hz] [mA]
IEW205 IEW206
Connection technology 50 50
39 39
M12 socket, 30 22 8
M12 x1
M8x1
M8x1
M12 socket, 4 4
M12 socket,
2 m grey, PUR cable EVW004
M12x1
M12 x1
M18 x1
We reserve the right to make technical alterations without prior notice. · 11.2021
4
17 4
LED 4 x 90° LED 4 x 90° 24
45
IIW204
34
30
M30x1,5
M12x1
LED 4 x 90° 5
36
7
Position sensors
Inductive M8 sensor
for limited space
Inductive sensors
8
Type Total length Sensing range Installation Electrical Switching Order
design output no.
[mm] [mm] [mm]
Example IES230
50
39
Operating voltage [V] 10...30
30 Current consumption [mA] < 10
Short-circuit protection yes
M12 x1
M8x1
M8x1
Accessories
4
LED 4 x 90° 13
Type Description Order
no.
Connection technology
M12 socket, straight, 4-pole,
2 m black, PUR cable EVC001
9
Position sensors
Inductive sensors
10
Type Total length Sensing range Installation Electrical Switching output Order
design no.
[mm] [mm] [mm]
3-wire · full metal sensor · sensing face of high-grade stainless steel · LED in cable end part · PUR connection cable
M8 x 1 37.5 2 flush PNP NO IEC213
M8 x 1 37.5 2 flush PNP NC IEC214
M8 x 1 37.5 2 flush NPN NO IEC215
M8 x 1 37.5 2 flush NPN NC IEC216
3-wire · stainless steel sleeve · sensing face LCP natural · LED in cable end part · PUR connection cable
M8 x 1 27.5 3 flush PNP NO IES238
M8 x 1 27.5 6 non flush PNP NO IES239
M8 x 1 27.5 3 flush PNP NC IES240
M8 x 1 27.5 6 non flush PNP NC IES241
M8 x 1 27.5 3 flush NPN NO IES242
M8 x 1 27.5 6 non flush NPN NO IES243
M8 x 1 27.5 3 flush NPN NC IES244
M8 x 1 27.5 6 non flush NPN NC IES245
2-wire · stainless steel sleeve · sensing face LCP natural · LED in cable end part · PUR connection cable
M8 x 1 27.5 3 flush PNP / NPN NO IES246
M8 x 1 27.5 6 non flush PNP / NPN NO IES247
Example IEC213
37,5
1 Operating voltage [V] 10...30
31,5
Current consumption [mA] < 10
M8x1
LED 4 Accessories
We reserve the right to make technical alterations without prior notice. · 11.2021
Example IES239
27,5 Angle bracket M8 E10734
13,5 8
M8x1
11
Position sensors
Huge IO-Link
performance in a tiny
M8 housing
Inductive sensors
12
Type Installation Measuring Setting Correction factor Order
range range no.
[mm] [mm]
M8x1
We reserve the right to make technical alterations without prior notice. · 04.2021
4
LED 4 x 90° 13
Connection technology
Connection cable, M8, 3-pole, 2 m, 50
IE5456
EVC268 42,5
black, PUR cable 30,5 8
Connection cable, M8, 3-pole, 5 m,
M8x1
EVC269
M8x1
1 1
L+ L+
4 4
3 3
L L
13
Position sensors
Twice as good:
inductive sensors
with analogue
output and IO-Link
Inductive sensors
High-precision distance
measurement for early dia-
gnosis of mechanical changes
Distance measurement and
switch using only one unit
Flexible use due to adaptable
output range
Measured value transmission
without any loss via IO-Link
More functionality with full
compatibility using standard
input devices
14
Type Total length Measuring range Installation Output signal Protection rating Order
no.
[mm] [mm]
Installation
Angle bracket for M12 design,
E10735
stainless steel
Angle bracket for M18 design,
E10736
stainless steel
Angle bracket for M30 design, 0 4 mm 10 mm
E10737
stainless steel
IO-Link A = detection zone, B = focus zone
In the case of measuring sensors, the 4096 measuring
1-port IO-Link master
(connects IO-Link sensors AL1060 points (i.e. the resolution) extend over the entire detec-
to the PC via USB) tion zone (A).
With the new analogue sensors, however, this resolution
can be (e.g.) specifically maximised in any focus zone
Memory plug, where minimal changes in distance need to be detected
We reserve the right to make technical alterations without prior notice. · 04.2021
E30398
parameter memory for IO-Link sensors
quickly.
For this purpose, all available 4096 measuring points are
“placed” in the particular zone to be considered.
IO-Link master
AL1320 In present example, this results in the highest possible
EtherNet/IP, 4-port
resolution of 628 measuring points per mm. This precise
measurement accuracy not only increases process
moneo|configure SA reliability, but can also prevent rejects, thus allowing
(Stand-alone) licence, software for online substantial savings.
and offline parameter setting of IO-Link QMP010
devices including maintenance and
support until the end of the following year
15
Position sensors
Robust full-metal
ultrasonic sensor for
harsh environments
Ultrasonic sensors
Continuous non-contact
level measurement and
object detection regardless
of environmental condition
Resistant to aggressive media
Long range of up to 2500 mm
Digital or analogue measured
value output
Easy parameter setting,
measured value transmission
and diagnostic information
via IO-Link
16
Products Accessories
Type Total length Output Order Type Description Order
no. no.
[mm]
M30, IO-Link
Angle bracket for type M30,
E10737
103 2 x PNP / 2 x NPN* UIT300 stainless steel
Dimensions
M30x1,5
M12x1
34,5 44 24,5
103
We reserve the right to make technical alterations without prior notice. · 09.2021
Wiring
1
L+
2
3
L
17
Position sensors
Measuring
light grids for easy
object monitoring
in intralogistics
Photoelectric sensors
18
Products Accessories
Height Height Number Order Type Description Order
Light grids Measuring range of beams no. no.
[mm] [mm]
6
FBO First beam occupied: 3
5 LBO Last beam occupied: 13
4
3 CBO Central beam occupied: 8
2 NBO Number of beams occupied: 11
1
NCBO Number of consecutive beams
occupied: 11
19
Position sensors
Always know
where you stand:
position feedback
for ball valves
Valve feedback systems
20
The flow direction can be clearly seen Target pucks
via the position indicator
Mounting Height of the Description Order
dimensions actuator shaft no.
[X / Y mm] [Z mm]
1
Ø shaft stub: ≤ 58 mm
Dimensions
Accessories
Type Description Order
no.
Spacer, 10 mm E12526
21
Sensors for motion control
A safe choice:
draw-wire mechanisms
for encoders
Encoders
22
Draw-wire mechanisms
Type Dimensions Linearity Housing type/ Rope spans Order
Housing material up to * no.
[mm] [%] [m]
cylindrical /
80 x 48 x 82 ± 0.02 1.9 E61439
metal, aluminium, anodised
cylindrical /
60 x 57 x 89 ± 0.1 2.4 E61440
PA
rectangular /
78 x 40 x 75 ± 0.01 3 E61441
die-cast zinc, plastic
rectangular /
115 x 103 x 115 ± 0.01 5 E61442
aluminium, anodised
Encoders
Draw wire mechanisms in combination with encoder
These encoder versions solve the majority of applications. In principle, other encoders with 58 mm diameter, synchro flange and 6 mm shaft
diameter can also be used with the draw wire mechanisms. You will find further encoders at ifm.com.
IO-Link master,
AL1120
EtherNet/IP, 4 ports
23
Industrial imaging
Combinable 2D inspection of
surfaces and contours for
maximum quality assurance
User-friendly software
simplifies inspection task
set-up
Powerful algorithms master
even demanding requirements
Reliable functioning in
changing light conditions
Maladjustment monitoring
ensures reliable quality control
24
Type Description Interface Order
no.
A contour presence verification wizard supports you in solving Using the blob presence verification wizard, you can easily
simple contour presence checks. Even inexperienced users can set up an application to analyse blobs. Blobs are contiguous
set up the application within 2 minutes. pixels that form an area. These areas can be checked for their
size, shape or other properties.
25
Industrial imaging
Illumination
26
Type Dimensions Illuminated Current Luminous flux Order
area length consumption no.
[mm] [mm] [mA] [lm]
Mounting profile
Diagrams and graphs
E89033
We reserve the right to make technical alterations without prior notice. · 04.2021
750 mm
Mounting profile
E89034
1000 mm
Connection technology
27
Industrial imaging
Ultra-flat backlight
for vision sensors
Illumination
Perfect illumination
These powerful backlights create homogeneous light, ensuring optimal,
shadow-free illumination of the objects to be inspected. The outer contours
are strongly highlighted by the background illumination and can be optimally
analysed by a vision sensor. The sensor verifies contours and positions rapidly
and reliably. The backlight can be operated in permanent or pulsed mode.
In addition to many other advantages, this especially results in a longer life
of the unit.
Ultra-flat design
Due to its extremely flat design with an overall height of only 9.8 mm, ifm’s
new generation of backlights allows for a very space-saving installation.
Optional mounting sets ensure quick and easy fastening.
28
Type Active Current Length Width Height Weight Order
illuminated area consumption no.
[mm] [mA] [mm] [mm] [mm] [g]
Homogeneity
Connection piece for clamps,
E21076 In industrial imaging applications, the use of backlights
stainless steel
is essential to ensure fast and reliable object recognition.
Especially with flat lighting concepts, creating a homo-
geneous illuminated area poses a challenge.
Clamp,
stainless steel, Ø 12 mm
E21110 The new powerful backlights from ifm improve the
lighting of application backgrounds. This results in
shorter exposure times of industrial cameras and reduces
the influence of extraneous light.
Rod, 150 mm, Ø 12 mm,
E21111
stainless steel
Rod, 200 mm, Ø 12 mm,
E21112
stainless steel
Rod, 300 mm, Ø 12 mm,
E21113
stainless steel
We reserve the right to make technical alterations without prior notice. · 04.2021
Wiring diagram
M12 connector
2 1 Pin 1: 24 V DC
Pin 2: N.C.
3 4
Pin 3: 0 V
Pin 4: on / trigger
29
Process sensors
30
Measuring range Poverload Pbursting Order Common technical data
relative pressure max. (static) min. no.
[bar] [bar] [bar]
Operating voltage [V DC] 8.5...36
Output function 4…20 mA
Reverse polarity protection •
0...400 1000 1,700 PL5400 Step response time [ms] 1
0...250 625 1,200 PL5401 Accuracy / deviations
0...160 400 1,100 PL5412 (in % of the span)
Linearity error < ± 0.5
0...100 250 1000 PL5402
Linearity < ± 0.1 (BFSL) / < ± 0.2 (LS)
0...60 150 900 PL5423 Hysteresis < ± 0.2
Repeatability < ± 0.05
Long-term stability < ± 0.1
Dimensions
Temperature coefficients (TEMPCO)
in the temperature range -40...90°C
M12x1 (in % of the span per 10 K)
TEMPCO of zero < ± 0.1 (-25...90 °C) /
< ± 0.2 (-40...-25 °C)
14,5
NBR,
Materials (wetted parts) high-grade stainless steel
(630 / 1.4542)
19
G1/4 1
Accessories
20
1) Seal
2) O-ring Installation
Wiring
Seal FKM E30145
1 BN
L+
2 WH
OUT
Connection technology
M12 socket,
EVC001
2 m black, PUR cable
M12 socket,
EVC002
5 m black, PUR cable
M12 socket,
EVC004
2 m black, PUR cable
M12 socket,
EVC005
5 m black, PUR cable
31
Process sensors
With E1 approval:
Pressure transmitters
for mobile machines
Pressure sensors
32
Measuring range Poverload Pbursting Order Common technical data
relative pressure max. (static) min. no.
[bar] [bar] [bar]
Operating voltage [V DC] 8...32
Output function 4...20 mA, M12 connector
Reverse polarity protection •
0...600 1500 2500 PT560E Accuracy / deviation
0...400 1000 1700 PT500E (in % of the span)
Linearity error < ± 0.8
0...250 625 1200 PT501E
Linearity < ± 0.25 (BFSL)/< ± 0.5 (LS)
0...100 250 1000 PT502E Hysteresis < ± 0.2
0...25 65 600 PT503E Repeatability < ± 0.05
0...10 25 300 PT504E Long-term stability < ± 0.1
Temperature coefficient (TEMPCO)
Output function 4...20 mA, DEUTSCH connector in the temperature range -40...125°C
(in % of the span per 10 K)
0...600 1500 2500 PT760E TEMPCO of zero + span < ± 0.1 (0...80 °C)
0...400 1000 1700 PT700E < ± 0.2 (-40...0 °C
and 80...125 °C)
0...250 625 1200 PT701E
Medium temperature [°C] -40...125
0...100 250 1000 PT702E
Protection IP 67 / IP 69K
0...25 65 600 PT703E
high-grade stainless steel
0...10 25 300 PT704E
Materials (wetted parts) (1.4542)
Output function 0.5...4.5 V, M12 connector (17-4 PH / 630)
Restrictor •
0...600 1500 2500 PU560E
compliant with
0...400 1000 1700 PU500E UN ECE R10 Rev. 5
EMC
0...250 625 1200 PU501E ISO 11452-2: 100 V/m
EN61326-1
0...100 250 1000 PU502E
0...60 150 900 PU523E
0...25 65 600 PU503E
Accessories
0...10 25 300 PU504E Type Description Order
no.
Dimensions
Installation
19 25,4 21,8
M12 x1
Adapter G 1/4 – G 1/2,
E30135
high-grade stainless steel (1.4571/316Ti)
51,4
71,5
19
66
52
19
12
19
1
G /4 1 G1 4
1
Wiring diagram
Connection technology
1 BN A
L+ L+
Socket, M12,
EVM001
2 m, PUR cable, halogen-free, black
2 WH B
OUT OUT
Socket, M12,
EVM002
5 m, PUR cable, halogen-free, black
PT5 PT7
Socket, M12,
EVM003
10 m, PUR cable, halogen-free, black
1 BN
L+ Socket, M12,
2 WH EVM004
OUT 2 m, PUR cable, halogen-free, black
3 BU
L Socket, M12,
EVM005
5 m, PUR cable, halogen-free, black
PU5 Socket, M12,
EVM006
10 m, PUR cable, halogen-free, black
33
Process sensors
Accurate detection
of high-pressure
cleaning
34
Type Measuring Medium Order Further technical data
range no.
35
Process sensors
Absolutely unique:
measuring air gaps
more accurately
than ever before
Flow sensors / flow meters
36
Type Medium Measuring range Process connection Order
no.
[µm]
5 3
Distance measurement
7 Measuring range [µm] 0…400
6 2 ± (5 % MW + 5 µm);
1 Accuracy
(pressure 1...3 bars)
± (3 % MW + 2 µm);
Repeatability
(pressure 1...6 bars)
Resolution[µm] 1
Flow measurement
4
Measuring range [l/min] 0.8…100
37
Process sensors
Level sensors
38
Type Process connection Outputs Order
no.
Accessories
Description Order
no.
120,9
147,4
Product-related documentation
38
Inspection certificate:
Material EN10204-3.1 and ZC0076
15,2
Mounting accessories IO-Link Pipe fitting DN50 (2") – G 1 Aseptoflex Vario E33213
USB IO-Link master for parameter setting and analysis
of units, supported communication protocols: ZZ1060 Varivent type F, DN25 (1"), Ø 50 mm –
G 1 Aseptoflex Vario, with leakage port E33228
IO-Link (4.8, 38.4 and 230 kbits/s)
moneo|configure SA Varivent type N, DN40...DN150, Ø 68 mm –
G 1 Aseptoflex Vario, with leakage port E33229
Stand-alone licence, software for online and offline
parameter setting of IO-Link devices including maintenance QMP010
Universal process adapter Rd 52 – G 1 Aseptoflex Vario E33340
We reserve the right to make technical alterations without prior notice. · 11.2021
39
Process sensors
Analytical sensors
*in preparation
40
Type Process con- Insertion depth Order Further technical data
nection no.
[mm]
moneo|configure SA
Welding adapters Stand-alone licence, software for online
and offline parameter setting of IO-Link QMP010
G 1/2 – Ø 30 mm for tanks E43300 devices including maintenance and support
G 1/2 – Ø 29 mm for pipes until the end of the following year
E43301
G 1/2 – Ø 30 mm for tanks,
with leakage port E43309
IO-Link Bluetooth adapter EIO330
G 1/2 – Ø 29 mm with leakage port,
for pipes; pressure rating up to 16 bar E43412
41
Process sensors
42
Type Process Insertion depth Order Accessories
connection no.
[mm] Description Order
no.
G 1 Aseptoflex
37 LDL200 LDL200 Varivent
Vario
G 1 – external thread Aseptoflex Vario – Varivent type N,
(DN40-150); Ø 68 mm E33222
43
Industrial communication
Two options
The passive power distributor can be operated either in AS-i networks or
in IO-Link structures. This helps to minimise stock-holding, especially where
both technologies are used. Up to 8 participants, either intelligent AS-i
sensors or actuators or IO-Link masters, can be connected via standard M12
sockets.
Robust design for demanding applications
The special housing material and the high ingress protection allow opera-
tion in areas with frequent intensive cleaning processes, for example in the
food industry. The module signals an excessive current flow per port via a
red LED. Malfunctions or damage to infrastructure, actuators or even the
plant can thus be avoided.
44
Advantages and customer benefits Connection technology
• AS-i or IO-Link power distributor Type Description Order
no.
These power distributors can be used in hygienic
applications due to the materials used and their inno-
vative housing design. M12 1 mm2
The 4-way or 8-way power distributors can either be 0.25 m EVF490
used to supply up to 8 AS-i participants, e.g. valve 0.5 m EVF491
heads, quarter-turn sensors, motor controls etc., or to
1m EVF492
supply power to IO-Link masters.
2m EVF493
Overcurrent detection indicates by a red-flashing LED
5m EVF494
at the respective M12 connection that more than the
permitted 4.4 A per channel are being drawn.
Dimensions
Technical data
59,3 21
AC2950
LED
AS-i or IO-Link power distributor
152
136
15...30; (AUX)
voltage supply
IO-Link operation
Accessories
208
192
5,3 38,4
45
Industrial Communication
edgeGateway:
Reliable connection
between sensors
and IT
edgeDevices
46
Direct connection to different clouds Products
The edgeGateway directly transmits the recorded and Description Order
prepared data to the most common cloud platforms no.
such as AWS, Microsoft Azure, Google Cloud and
Cumulocity. edgeGateway,
AE1203
colour display with touch function
moneo|edgeGateway Software LIC
QM9104
(required)
Technical data
Accessories
Type Description Order
no.
Installation
1
RAM mount set EC1414
OT-Level
47
Industrial communication
edgeController:
an all-rounder,
which leaves nothing
to be desired
edgeDevices
48
Connection to different clouds Products
The edgeController allows for transmission of the Type Description Order
recorded and prepared data to the most common no.
cloud platforms such as AWS, Microsoft Azure, Google
Cloud and AnyViz. Furthermore, the edgeController
speaks the common standard digitisation languages
edgeController,
such as OPC UA and MQTT. colour display with touch function
AE1300
Whenever data is to be recorded and processed in real
time, I/Os can be read and controlled by using Industrial
Ethernet protocols such as EtherCAT, EtherNet/IP or Technical data
Modbus TCP. The display contents are just as freely
programmable.
Operating voltage [V DC] 20...32
Display resolution [px] 1280 x 480
Display size 12.3"
Display background
LED
illumination
Protection rating IP 65
Ambient temperature [°C] -35...60
MQTT
OPC - UA diecast aluminium,
Housing material
powder coated
HTTPS
TCP / IP, UDP / IP Dimensions [mm] 339.1 x 160.5 x 47.7
IoT- Core
Accessories
Type Description Order
no.
Installation
MQTT
EtherNet / IP
HTTPS
EtherCAT RAM mount set EC1414
TCP / IP, UDP / IP
Modbus TCP
IoT- Core
Connection technology
K
edgeGateway / USB case,
screw housing for USB cable including E70452
housing adapter
49
Industrial communication
Robust data
distribution:
Ethernet switches for
field applications
Industrial Ethernet switches (unmanaged)
50
Products Connection technology
Type Description Order no. Type Description Order no.
StandardLine PerformanceLine
Operating voltage [V DC] 8...32 (US; to SELV / PELV)
Current consumption [mA] 100 (US)
Interface Ethernet
Number of ports 6
Transmission standard 10Base-T (IEEE 802.3i); 100Base-TX (802.3u)
Transmission rate [MBits/s] 10; 100
Ambient temperature [°C] -25...70
Daisy chain voltage supply no yes
51
IO-Link
IO-Link master:
Connection of
sensors to the PLC
and to the IT world
IO-Link master
DataLine Coolant / Food
52
Advantages and customer benefits The products
• Separation between automation Type Description Order no.
and IT network
Coolant Food
Machine uptime is of highest priority. The automation
network must by no means be interrupted by external IO-Link master DataLine
factors. Therefore the unit features a separate IoT
PROFINET + IoT 4 Port AL1300 AL1301
Ethernet socket separating IT and automation network.
This means that important sensor information can be EtherNet/IP + IoT 4 Port AL1320 AL1321
safely sent to the IT and ERP system. EtherCat + IoT 4 Port AL1330 AL1331
• Sensor configuration with LR DEVICE Modbus TCP + IoT 4 Port AL1340 AL1341
The intuitive software finds all IO-Link masters in the IoT only 4 Port AL1350 AL1351
network and creates an overview of the whole plant. Powerlink + IoT 4 Port AL1370 AL1371
In addition, all connected sensors are displayed with PROFINET + IoT 8 Port AL1302 AL1303
the respective parameters. This makes it possible to EtherNet/IP + IoT 8 Port AL1322 AL1323
set the parameters of all sensors in the system from
EtherCat + IoT 8 Port AL1332 AL1333
one central point.
Modbus TCP + IoT 8 Port AL1342 AL1343
• Easy sensor connection
IoT only 8 Port AL1352 AL1353
The sensors and actuators are connected via standard
Powerlink + IoT 8 Port AL1372 AL1373
M12 connection cables without screening. Depending
on the device type, up to 4 or 8 IO-Link sensors can Technical data
be connected and supplied with up to 3.6 A.
With the EVC693 or EVF693 accessories, additional IO-Link master Order no.
auxiliary power for the connection of IO-Link actuators DataLine
Coolant / Food AL1300 AL1302 AL1301 AL1303
can be supplied. The cable can be up to 20 m long. AL1320 AL1322 AL1321 AL1323
AL1330 AL1332 AL1331 AL1333
Connection technology AL1340 AL1342 AL1341 AL1343
AL1350 AL1352 AL1351 AL1353
Type Description Order no. AL1370 AL1372 AL1371 AL1373
-25...60 °C
temperature
1m EVC042 EVF042
Polyamide /
2m EVC043 EVF043 Housing materials / Polyamide /
brass
socket stainless steel
5m EVC044 EVF044 nickel-plated
10 m EVC493 EVF045
Accessories
Y splitter (adapter A port / B port)
Type Description Order
1m EVC693 EVF693 no.
2m EVC694 EVF694
5m EVC695 EVF695
LR DEVICE (supplied on USB flash drive)
10 m EVC696 EVF696 Software for online and offline
QA0011
parameter setting of IO-Link sensors and
actuators
Coolant,
E73004
protective caps M12, (10 pcs)
53
IO-Link
IO-Link master
CabinetLine
54
Advantages and customer benefits The products
• Separation between automation and Type Description Order
IT network no.
Machine uptime is of highest priority. The automation
network must by no means be interrupted by external IO-Link master CabinetLine
factors. Therefore the unit features a separate IoT
PROFINET + IoT 8-port AL1900
Ethernet socket separating IT and automation network.
EtherNet/IP + IoT 8-port AL1920
This means that important sensor information can be
safely sent to the IT and ERP systems. EtherCat + IoT 8-port AL1930
Modbus TCP + IoT 8-port AL1940
• Sensor configuration with LR DEVICE
Powerlink + IoT 8 Port AL1970
The intuitive software finds all IO-Link masters in the
network and creates an overview of the whole plant.
In addition, all connected sensors are displayed with IoT only 8-port AL1950
the respective parameters. This makes it possible to
set the parameters of all sensors in the system from
one central point. Technical data
• Easy sensor connection IO-Link master CabinetLine
The sensors and actuators are connected via standard AL1900, AL1920, AL1930, AL1940, AL1970
M12 connection cables without screening. The
Operating voltage [V DC] 20...30
connection cables are fixed via removable COMBICON
Total current consumption [A] ≤ 3.9
connectors on the IO-Link master. Up to 8 IO-Link
sensors can be connected and be supplied with up to IO-Link version 1.1
3.6 A. The cable can be up to 20 m long. Number of IO-Link ports 8 A ports
Number of binary inputs 8+8
• Reliable digital data
Number of binary inputs 8
The sensor data is transferred digitally.
Parameter memory •
Unlike analogue signals, contact resistance and EMC
Current for all ports [A]
interference cannot corrupt the signals. (device supply)
≤ 3.6
Protection IP 20
Dimensions
Electrical connections COMBICON connector
AL1900 Installation DIN rail
50 105,3
Ambient temperature [°C] -25...65
Dimensions [mm] 114.2 x 50 x 105.3
Accessories
Type Description Order
125,7
no.
35
LEDs
1 100,6 actuators
M12 socket
1 m black, PUR cable EVC471
2 m black, PUR cable EVC001
5 m black, PUR cable EVC002
10 m black, PUR cable EVC003
20 m black, PUR cable EVC083
55
IO-Link
IO-Link devices
56
Type Description Memory Dimensions Ambient Protection Connection Order
size temperature rating no.
[mm] [°C]
1 m cable,
IO-Link memory 128 kBytes 20 x 7 x 48 -20...60 IP 67 / IP 69K PUR; 3 x 0.14 mm², DSU100
M12 connector
57
Identification systems
No compromises:
robust UHF evaluation
system for harsh
environments
RFID UHF
So compact, so flexible
The new RFID UHF evaluation systems convince with their compact design
and the maximum flexibility they offer. Complete with antenna, evaluation
unit and switch, the hardware provides everything required for a quick and
easy installation. What is more, the optimised operating principle of the
system allows direct installation in metallic or wet environments – without
any loss of performance.
Transferring data over the network, controlling actuators directly
At maximum performance level, the antenna can detect up to 16 rapidly
moving tags, at a distance of up to 3 m. The tag reading can be refined
further via selective RSSI values. Using an additional fieldbus interface offers
the possibility to directly connect another network point. The digital output
can be used to control an actuator.
58
Advantages of ifm’s UHF RFID solution: Products
Robust and expandable Type Description Order
no.
Antenna, evaluation unit and interface are integrated
in one compact, robust housing with protection rating
IP 67. This makes the system perfectly suited for use in PROFINET interface
harsh industrial environments.
RFID UHF compact unit
DTE801
Powerful antenna 865...868 MHz (ETSI)
RFID UHF compact unit
Thanks to the internal antenna with circular polarisation, 902...928 MHz (FCC)
DTE901
the device can be installed in metallic housings without
reception being affected. EtherNet/IP interface
RFID UHF compact unit
Integrated web server 865...868 MHz (ETSI)
DTE802
The evaluation systems have an integrated web server. RFID UHF compact unit
DTE902
Users log in via an HTTP address to get full access to 902...928 MHz (FCC)
the device set-up and, in case of cloud integration, to TCP/IP interface
monitoring and diagnostic data.
RFID UHF compact unit
DTE804
Universal interface 865...868 MHz (ETSI)
The UHF RFID evaluation units with their interfaces RFID UHF compact unit
DTE904
902...928 MHz (FCC)
for Profinet, EtherNet/IP and TCP/IP are ideal for direct
connection to PCs, industrial PCs or PLCs. Using an Further country approvals and interfaces for IO-Link and
IoT (cloud connection) are in preparation.
additional fieldbus interface, it is also possible to pass
through signals and minimise field wiring.
Mounting accessories for DTE801, DTE802, DTE804
Additional digital inputs
The unit has two additional digital inputs and outputs. Mounting bracket,
E80335
The inbuilt logic function can be used to provide addi- 1.4301 (stainless steel / 304)
tional control functionality directly, e.g. to immediately
control a light tower when required.
Mounting plate,
Applications 1.4301 (stainless steel / 304)
E80336
The benefits of the evaluation systems really come in
to their own in track and trace and traceability appli-
cations. Thanks to the long ranges, for example, tags Mounting rod
on vehicles with access rights can be detected and E80337
1.4301 (stainless steel / 304)
evaluated at a distance of up to 3 meters, after detection
it is possible to control the barriers or gates directly Selection RFID transponders
from the unit. Without time consuming programming
effort. ID-TAG / R30x10 / 04 – 865...870 MHz, 96 bit E80353
ID-TAG / 73.5x21.2 / 04 – 1000 pieces on reel E80386
In intralogistics, the system is used for seamless product
tracking. It is possible to read up to 16 tags simulta- ID-TAG / 139 x 53 x 15 / 04 E80393
neously and the products can be clearly assigned to ID-TAG / 174 x 70 x 17.6 / 04 E80394
their designated storage stations or pallets. This ensures
We reserve the right to make technical alterations without prior notice. · 04.2021
59
Identification systems
60
Type Description Order
no.
RFID HF
compact unit DTE605
RFID UHF
compact unit EU DTE805
RFID UHF
compact unit US/CA DTE905
Connection technology
ID tag/51x48x12.6/04 E80414
Type Description Order
no.
ID tag/51x37x7.5 E80417
Ethernet connection cable, PUR,
5 m, M12 / RJ45 EVC933
We reserve the right to make technical alterations without prior notice. · 09.2021
ID tag/47x10/06 E80341
Ethernet connection cable, PUR,
10 m, M12 / RJ45 EVC934
ID tag/10.1x3.9/03 E80415
Ethernet connection cable, PUR, 5 m,
M12 / M12 EVC907
61
Condition monitoring systems
Configurable
signal lamps
Perfect visibility
Modern LED RGB technology –
long life, reduced stock-
keeping
Different modes configurable
via IO-Link or setting menu
Also as standard version with
digital inputs
Easy installation
High performance
Signal lamps are used for status indication or as warning device everywhere
in factories on machines, conveyors and installations. ifm’s innovative
signal lamps offer several advantages over conventional signal lamps and
are therefore suitable for demanding applications.
Flexible configuration
In general signal lamps must be adapted to the application. Instead of
spending time and effort on screwing modules of different colours together,
the new LED RGB technology makes it possible to adjust the signal lamp
as needed via IO-Link or setting button (e.g. permanently on, low flash
rate, high flash rate, different colours, siren). This reduces type variety and
stock-keeping.
62
Type Communication Items supplied Protection Order no.
rating
3 5
segments segments
Optimum visibility
The patented technology creates a strong contrast
between the light spot of the LED and the environment. Basic fixture E89060
This ensures optimum visibility, in particular in the
event of extraneous light, for example in the vicinity of
large windows.
Wall fixture E89061
Long life
The use of LED technology means the signal lamp has
a very long life. Spacer pole 100 mm E89065
Spacer pole 300 mm E89066
Adaptable
The LED RGB technology allows the signal lamp to be Spacer pole 800 mm E89067
individualised (permanently on, low flash rate, high
We reserve the right to make technical alterations without prior notice. · 11.2021
flash rate, different colours). This reduces type variety Connection technology
and stock-keeping. Type Description Order
The lamp can be put into different operating modes, no.
e.g. analogue mode for level indication. 7 different
signal sounds can be set for the siren.
Socket, M12, 8 poles,
E11950
Easy installation 2 m black, PUR cable
A fixture is supplied with the device. In addition, a Socket, M12, 8 poles,
E11807
5 m black, PUR cable
version with a mounting base is available which allows
raised installation. This mounting base can be rotated Socket, M12, 8 poles,
E11311
10 m black, PUR cable
by 90 degrees so that wall mounting is possible without
Socket, M12, 8 poles,
further accessories. Moreover, accessories for pole 15 m black, PUR cable
E11856
mounting are available.
Jumper M12 / M12,
E12572
1 m black, PUR cable
63
Systems for mobile machines
ioControl – rugged
I/O module with
integrated controller
I/O modules
64
Features and benefits Products
The decentralised I/O modules of the ioControl system ioControl Order no.
connect binary and analogue sensors to a controller
via CAN bus using the CANopen protocol. Furthermo- M12 CR2040 CR2041 CR2042
re, I/O modules provide additional functions for signal DEUTSCH CR2050 CR2051 CR2052
preprocessing.
The compact, glass-fibre reinforced housing features Number of inputs (can be configured)
reverse-polarity protected DEUTSCH connectors or M12 Analogue multifunctional /digital 8 – –
connectors suitable for mobile use, providing all the Analogue multifunctional /
necessary connections for inputs, outputs, communi- – – 4
frequency/digital
cation and programming. An integrated two-colour Frequency/digital 4 – –
LED display with keyboard serves to indicate the most Resistance /digital 4 – 4
important system messages, the baud rate and the
node number as well as for device configuration. Number of outputs (can be configured)
An extensive range of connection cables completes PWMi /digital 4.0 A – 4 4
the offer. PWM/digital 4.0 A – 4 –
• Configurable inputs and outputs PWMi /digital 2.5 A – 4 4
A high degree of flexibility is provided by the PWM/digital 2.5 A – 4 –
configurable inputs and outputs. There is a choice of
analogue and digital inputs. The analogue inputs can Common technical data – ioControl
be set as current inputs (0...20 mA) or voltage inputs
impact-resistant
(0...10 V / 0...32 V). Housing
polyamide
For digital and analogue I/O modules, the profile Device connection inputs/outputs 6 poles
DSP 401 has been defined. The input/output functions CAN interface 1 (Deutsch DT04-6p)
of the module are configured via the device object or 5-pole
directory. (M12 connector)
supply voltage 6 poles
• The electronics CAN interface 2 (Tyco/AMP)
The core of the controller, which has been designed Protection IP 65, IP 67
according to the applicable standards for electronics Operating voltage [V DC] 8...32
in mobile applications, is a modern 32-bit processor. Current consumption [mA]
≤ 200
Its monitoring and protective functions enable reliable (without external load)
operation even under extreme operating conditions. Temperature range [°C]
-40...85
operation/storage
Programmable to IEC 61131-3 with CODESYS 2.0 A/B CiA DS 301 V4,
Apart from their application as I/O modules, all units CiA DS 401 V 1.4
Interfaces CAN ISO 11898,
can also be used as freely programmable mini 20 Kbits/s...1 Mbit/s
controllers with CANopen and J1939 among others. (default 250 Kbits/s)
Programming is done via CODESYS by means of the CANopen, SAE J 1939
Protocols CAN
standardised IEC 61131-3 languages, allowing the or free protocol
user to build the application software with ease. Programming CODESYS V 2.3
In addition, libraries are available for special functions Total memory 1536 kBytes
of the controller. Application memory 512 kBytes
We reserve the right to make technical alterations without prior notice. · 04 .2021
DEUTSCH M12
65
Connection technology
ecolink M12,
Ethernet D-Code
for industrial
applications
Industrial applications /
factory automation
66
Technical data: Products
Operating voltage: 30 V AC / 60 V DC Type Description Order
Nominal current: 4 A no.
Protection rating: IP 65, IP 67
in locked condition with the matching counterpart. M12 cable plug · 4 poles · straight
Tightening torque 2.0 m EVC893
Threaded sleeve: 0.6 Nm – 1.2 Nm
5.0 m EVC894
Note the maximum value of the counterpart
10.0 m EVC895
Ambient temperature: -25...90 °C
20.0 m EVC896
Drag chain: > 3 million bending cycles
50.0 m EVC897
Materials:
M12 cable plug · 4 poles · angled
Housing / moulded body: TPU
Coupling nut: brass 2.0 m EVC898
M12x1 14
M12 cable plug · 4 poles · straight-angled
0.25 m EVC910
0.5 m EVC911
Example EVC893
15,5 14 M12x1
1.0 m EVC912
2.0 m EVC913
15,5
35,5
14 14 0.25 m EVC917
We reserve the right to make technical alterations without prior notice. · 04.2021
10.0 m EVC922
14
M12x1 15,5
38 L 51,5 20.0 m EVC923
Wiring diagram
Example EVC903
M12x1 14 14 M12x1
1 YE 1 1
2 WH 2 2
15,5
15,5
51,5 L 51,5 3 OG 3 3
4 BU 4 4
screen screen
67
Connection technology
68
Technical data: Products
Operating voltage: 30 V AC / 60 V DC Type Description Order
Nominal current: 1.5 A no.
Protection rating: IP 65, IP 67 (M12 connector)
in locked condition with the matching counterpart. Connection cable · connector M12 straight / connector RJ45
RJ45 connector: IP 20
0.5 m EVC924
Tightening torque
1.0 m EVC925
Threaded sleeve: 0.6…1.2 Nm
Note the maximum value of the counterpart 2.0 m EVC926
Dimensions
Example EVC924
M12x1 14
15,5
51,5 L 42
Example EVC930
35,5
L 42
14
M12x1 15,5
38
We reserve the right to make technical alterations without prior notice. · 04.2021
Wiring
1 YE(TD+) 1
2 WH(RD+) 3
3 OG(TD-) 2
4 BU(RD-) 6
screen
Example EVC924
69
Power supplies
Intelligent power
supply directly in
the field
24 V DC power supplies
70
Type Operating Output Output power Number of Plug for Order
voltage voltage (permanent) output circuits output circuits no.
[V AC] [V DC] [W]
380...480
2 x M12,
±15% 24 500 4 DN4234
L-coded
(3-phase)
More reliability
Electronic fuses reliably detect short circuits even with Wirable M12 socket,
L-coded, E12672
high line resistances. Due to the four individually fused
output circuits, a faulty circuit is selectively switched
off, the intact circuits continue to function reliably. M12 connection cable,
Even with high current peaks, such as when switching L-coded E12641
capacitive loads, the supply is guaranteed.
Use of the power supply directly in the field: M12 connection cable,
E12653
L-coded
AC connection technology
We reserve the right to make technical alterations without prior notice. · 09.2021
T-splitter 7/8"
5-pole E12778
71
Power supplies
Circuit protection
with monitoring
function for the 24 V
circuit
Electronic 24 V DC circuit breakers
72
Modular installation Products
The system has a modular structure and consists of Inputs Nominal Order no.
a supply module to feed max. 40 A. The protection current
[V DC] [A]
modules can be mounted side by side. This is done
via a simple clip mechanism, completely without any Supply module IO-Link Standard
bridges, jumpers or the like. An additional feed modu-
le that can be installed in the centre or to the right of 24, 40 A – DF2101 DF1100
the protection elements provides for an uninterrupted Circuit protection module IO-Link Standard
replacement of the protection modules in the event of
– 2x2 DF2212 DF1212
a failure. Potential modules are used to distribute the
– 2x4 DF2214 DF1214
circuits and wire the ground lead. Easy mounting and
minimised wiring complexity save cost and time. – 2x6 DF2216 DF1216
With the standard version the user can connect up to – 1x8 DF2208 DF1208
10 and with the IO-Link version up to 8 circuit breaker – 1 x 10 DF2210 DF1210
modules to the supply module. – 2 x 1...10 DF2220 DF1220
The new protection module DF2524 can be connected – 2 x 1...4 DF2524
to both the IO-Link supply modules and to the standard GND and load modules IO-Link Standard
supply modules (see table).
Feed module GND, 1 x 10 mm2 DF3100
Feedback Potential module GND, 10 x 2.5 mm2 DF3110
In addition to the triggering mechanism, the modules Potential module LOAD
DF3200
feature an LED for signalling if the module has triggered, 2 x 5 x 2.5 mm2
if it is active and in to what extent it is utilised. By means Feed module for
DF3210
of a pushbutton each channel can be activated, deacti- central or ring feed
vated or set. The feed module has an additional collec-
tive output to provide a warning signal if a module has Further technical data
triggered.
More transparency with IO-Link
The IO-Link version has the same functions; there is, Operating voltage [V DC] 24 (18...30)
however, additional information about each channel: Switch-off characteristics
Time-current
characteristic
• effective nominal current (1 byte cyclical)
UL508listed,
• output voltage (acyclical) NEC Class2 (for DF1212 /
Approvals
DF1214 DF2212 /
• triggering counter (acyclical) DF2214 and DF2321)
• current device status (1 byte, cyclical)
– short circuit Accessories
– overload
– undervoltage Description Order
no.
– limit value reached (80 % IN)
• activation/deactivation
IO-Link connection cable, 0.5 m, M12 connector E12613
• reset with triggering
IO-Link connection cable, 2 m, open end E12614
• reset of the tripping-counter
We reserve the right to make technical alterations without prior notice. · ·11.2021
73
Who says we can only
do hardware?
moneo. The all-you-want software for industrial evolution.
One thing is clear: proper industrial absence, for example because the level
digitisation begins with the sensor and is running low or the vibration on a fan | starterkit
extends into the IT structure. If you are rotor is dangerously increasing, moneo
already using IO-Link in your plant, you wil immediately alert and inform you moneo|starterkit
have taken the first important step to- by e-mail. This allows you to schedule brings condition
wards more efficiency and less unplanned maintenance in good time or initiate monitoring for motors
downtime. And you are ready for the manual refill processes to keep things on fans, pumps and many other
second step. You are ready to get even moving. In short: moneo will optimise machines to a new level.
more out of your plant with the help of your processes and ensure that they will The complete package based on
simple and ingenious software. be trouble-free. well-coordinated hardware and
software enables you to keep an
Turning values into added value A new kind of flexibility thanks to eye on the condition of your system
With moneo, you can easily access the moneo and to plan maintenance require-
entire IO-Link network. And, thanks to As you have seen, moneo leaves nothing ments in advance. And it‘s more
the logical tree structure, you will have to be desired. It is a great piece of soft- user-friendly and convenient than
quick and efficient access to each indi- ware to begin with, but its actual extent ever.
vidual sensor at any time. As soon as will always depend on your specific
your IO-Link network is integrated into requirements. You can, for example, In short:
moneo, values will no longer be just simply begin with parameter setting and The moneo|starterkit is the perfect
separate pieces of information. the cockpit function for one part of your start into digital evolution.
moneo makes values useful and trans- plant and explore the possibilities of real-
forms them into added value. You can, time maintenance later, when you are
for example, combine the level values of ready for the next step.
all tanks into one overall stock figure. To put it in a nutshell: moneo offers the
This overall stock figure can then be flexibility to simply grow with your
clearly displayed along with other relevant requirements. The days of unmanageable,
information in the cockpit. oversized and confusing software
This gives you a continuous overview of are over. It is time for simplicity, user-
all the important values in your plant or friendliness and ingenuity.
process. If things become critical in your It is time for moneo!
74
|appliance |vAppliance
www.moneo.ifm
75
moneo|OS
76
moneo|configure is the
convenient management tool
for your IO-Link network. Set
the parameters of the IO-Link devices in
your machines with just a few clicks. The
visualisation in the cockpit facilitates both
|configure
set-up and error diagnostics. The user-
friendly parameter data set management
contributes to speeding up new sensor
integration.
moneo|configure SA The manage-
ment tool is also available as a stand-
alone version for those who wish to
configure parameters easily via IO-Link.
www.moneo.ifm
77
We love it when
a plan comes together.
78
moneo|RTM: consumption monitoring moneo|RTM: optimisation of the level
for sustainably optimised processes. monitoring in a calibration plant.
In production, cooling water is provided, Flow sensors are calibrated in the calibra-
for example, for cooling of lasers. A tion plant at ifm prover gmbh.
decreasing cooling capacity, for example To ensure maximum measuring accuracy,
caused by an insufficient water supply both hot and cold water is sent through
that is detected too late will increase the sensors. The measured values are
energy costs and, in the worst case, lead used for calibration.
to overheating and, thus, to a plant failure.
This can be remedied by measuring the
consumption and calculating the heat
output of the cooling circuit.
www.moneo.ifm
79
ifm system sales –
solutions for your
installation from Competence:
Trust our application know-how.
80
Reduce costs, prevent downtime,
optimise processes – system solutions from ifm.
Example: fan monitoring
ERP systems, e.g.
SMARTOBSERVER
LR SMARTOBSERVER
The software visualises, logs and exports
Visualisation process data. Maintenance tasks can
be planned by means of alarm and
notification functions and worldwide
connectivity.
LR SMARTOBSERVER has an integrated
database and can be installed as a
stand-alone or server application.
PLC PC
Server VSE diagnostic electronics
Records process data from sensors,
interprets and prepares it and transmits
the results to the PLC, PC or higher-level
IT systems.
Process data
and messages TCP/IP
IO-Link master
The module records process data from
sensors and transmits it to the PLC, PC
or higher-level IT systems. It offers all
VSE150 4-port advantages and possibilities of IO-Link.
diagnostic electronics IO-Link master
StandardLine
AL1100
Detection of
unbalance on rotor blades
With the VSE150 diagno- Filter monitoring
stic electronics and the With the AL1100 IO-Link
VSA001 vibration sensor master and the PQ3809
pressure sensor
Vibration monitoring
on motors
With the VSE150 diagnostic
electronics and the VSA001
vibration sensor
Temperature monitoring
Vibration monitoring on motors
on bearings With the VSE150 diagnostic
With the VSE150 diagno- electronics and the TS2229 +
stic electronics and the TP3237 temperature sensors
VSA001 vibration sensor
Speed monitoring
With the VSE150 diagnostic
electronics and an inductive
sensor
Contact us: info@ifm.com
Or visit our webshop:
ifm.com
81
The ifm
sales platform Overview:
The ifm product range is clearly
structured and the individual product
platforms ensure quick orientation.
Selectors:
Choose between the most important
technical data and you will get the
product selection suitable for your
requirements.
Compare:
You can compare the technical data
of up to 3 products. Differences are
marked in colour.
Search and find:
Enter the search term in the full text
search and get suggestions for pro-
ducts, topics and product groups.
Order:
We provide a quick-order and csv
import function for the shopping
basket on the product pages.
More clarity
For each product group you can make
a first selection via the platforms.
A clear visual language and explanatory
texts give you a first impression of the
products.
82
Easy purchasing
You are in control of everything in the
shopping basket: quantity, modes of
shipment and payment. We provide you
with everything you can expect from a
modern shop.
Customers relying on long-standing
tried-and-tested articles can quickly
order by entering the article number in
the shopping basket. This saves time,
in particular when a product has to be
quickly reordered.
Navigation in the menu structure is no
longer necessary.
Try us.
Click here to directly get to our homepage:
ifm.com
83
ifm.com
That‘s it? Not by far!
ifm article no. 78004131 · We reserve the right to make technical alterations without prior notice. · Printed in Germany on non-chlorine bleached paper. 11.2021