Professional Documents
Culture Documents
407
Name of Work: E- Tender for "Conducting NDT, Load Testing, preparation of Traffic diversion plan, Rate Analysis, Cost Estimate, BOQ, Interpretation of Test Results, Correlation of Theoretical and Field
Results, Rehabilitation Measures, Report Preparation Etc. for Bridges/Flyovers (Two Packages) Under Hoogly River Bridge Commissioners (HRBC)- Kolkata , Govt. of West Bengal" - (Package - 2 : BOQ for
Structural Health Assessment Project of 3 Nos. Bridges /Flyovers at Kolkata - Flyovers/Bridges under Package-2: (i) Nagerbazar flyover, (ii) Cossipore & Lockgate flyover) & (iii) Kidderpore new flyover).
1 2 4 5 6 7 8
Updation of NDT marking plan as provided by RITES, by visual inspection
through a bridge expert and videographer, using its own means to cover
areas of high distress & abnormal variations in structure prior to start of NDT
1 activity. Submission of detailed investigation plan along with updated NDT 3 No. of flyovers 25000.00 75000.00 INR Seventy Five Thousand Only
marking plan within 10 days from the date of initiation of work for approval of
RITES. Mapping over the structural members at the site with good quality
paint (for visibility at day & night) with indication of width, length and depth.
2 NDT FOR RCC STRUCTURES
2.01 Rebound Hammer Test: For determining the estimated compressive
strength of concrete and uniformity of concrete in terms of surface hardness
INR Fifty Seven Thousand Seven Hundred & Fifty
as per IS 13311 (Part-2)-1992, also establishing correlation chart between 330 Nos 175.00 57750.00
Only
rebound hammer and other confirmatory test for estimated in-situ strength of
concrete if required.
i d
2.02 Ultrasonic Pulse Velocity Test: for ascertaining the quality of concrete,
INR One Lakh Twenty Five Thousand Four Hundred
soundness and density of concrete, uniformity of concrete in terms of density 330 Nos 380.00 125400.00
Only
as per IS 13311 (Part-1)-1992.
2.03 CORE Sampling and Testing (Partially Destructive Test): Extracting the
concrete core samples at select locations from RCC members of the
structures covered under the study and evaluating the properties fck value,
grade of concrete in the laboratory from the core samples selected. IS
456:2000; IS516:1959, IS 1199:2002; without encountering any steel
18 Nos. of Set 12000.00 216000.00 INR Two Lakh Sixteen Thousand Only
reinforcement from the RCC members at specified locations by site in-
charge with portable power driven core cutting equipment. After extraction of
core from the structures, each core extraction/cutting location shall be filled
with epoxy materials asper standard practice and codal guide lines.
(1 Set = 3 Nos. of Core)
2.04 Carbonation Test: Measurement of carbonation depth by phenolphthalein
spray test at selected locations on RCC members of the structures covered
under the study to see the depth of carbonation as per BS EN 14630:2006, 142 Nos 1500.00 213000.00 INR Two Lakh Thirteen Thousand Only
BS EN 13295:2004. Ratio of Carbonation depth to cover depth is also
measured to check the intensity of carbonation attack on steel bar
472
407
3.01 Liquid Penetration Testing : To reveal surface breaking flaws by bleed out
off a colored
l d or fluorescent
fl t dye
d from
f the
th flaw
fl as per ASME standards
t d d refers
f
400 Nos 500.00 200000.00 INR Two Lakh Only
to the ASME Code Section V Article 6 and ASME VIII Div 1 Appendix 8 and
other relevant sections/guidelines.
3.02 Ultrasonic Pulse Eco Testing of Metallic Sections:- For assessment of
welding/joints assessment of Steel Plates/Tube/Pipe Weld/Forging/Casting 400 Nos 1000.00 400000.00 INR Four Lakh Only
Metals/Alloys Vickers 80-94; HRC 17.9-68.5 HRB 13.5-99.5, LD 200-900, HB 40 Nos 400.00 16000.00 INR Sixteen Thousand Only
82.0-940.0 to get the type of material and its estimated tensile strength.
3.07 Inspecting torque/Tension on Nut/ Bolt: To determine the torque to a
fasten nut or bolt permits proper tension and loading wherever bolts are
loose and found deteriorated. Check torque applied to the nut/bolt so it can
be matched to the specifications as per codal requirement IS 6623: 2004.
Also check the gap between bolt/nut using filler gauge. When nuts and bolts 10 Nos 8000.00 80000.00 INR Eighty Thousand Only
are fastened together under load the action of tightening the nut increases
the force applied to the bolt causing elongation. Bolt tension monitors should
be also used to accurately measure the elongation, stress, and %strain of the
bolt during traffic load in 5% intact bolts.
3.08 Mechanical Testing of Loosened Bolt : To evaluate the mechanical
properties like Tensile Strength and Shear Strength of the bolt and to 12 Nos 4000.00 48000.00 INR Forty Eight Thousand Only
evaluate the grade of bolt.
3.09 Radiography test for weld/lamination, as per field requirement. Test should
be conducted the conducted under the supervision of approved radioactive 9 Nos 10000.00 90000.00 INR Ninety Thousand Only
system operator (license holder from Govt.).
4.03 Dynamic load test on the flyover/bridge spans: Evaluate the dynamic
behavior of bridge with calculation of various parameter like strain, vertical
deflection, vibration and lateral movement near the expansion joints through
correlation with the identified peaks and traffic loads and full load test. 3 Nos 200000.00 600000.00 INR Six Lakh Only
Sensors to be installed 3-Axis Accelerometer (Vibration due to Traffic
movement & Displacement), Strain Gauge (Strain value) & LVDT Sensor
(Displacement/crack movement).
4.04 Condition Assessment of the each and every Bearings & expansion
joint of flyover: Each and every bearing identification along with
3 No. of flyovers 100000.00 300000.00 INR Three Lakh Only
photograph of their present condition, suggestion for replacement or
maintenance if required immediate marked over the drawing.
5 PREPARATION & SUBMISSION OF DPR
5.01 Specialized consulting firm /Agency shall prepare and submit the DPR of
each flyovers/bridge in 3 copies which includes all inspection and NDT
results, interpretation of test results, load test reports, conclusion, site
photographs, scheme for repair/rehabilitation/ retro-fitting works with BOQ
and Rate analysis, technical Specifications, design and execution drawing
3 No. of flyovers 150000.00 450000.00 INR Four Lakh Fifty Thousand Only
(feasible and economic options) for rehabilitation/strengthening of flyovers,
improvement of drainage system, traffic diversion plan, bridge inspection
and maintenance manual including QAP, safety and environmental plan. HD
quality site photographs and Video during inspection & testing shall be
provided in a good quality CD/DVD/USB hard disk..
Quoted Rate in Words INR Seventy Seven Lakh Seventy Two Thousand Nine Hundred & Ninety Five Only
2194
508
Name of Work: E- Tender for "Conducting NDT, Load Testing, preparation of Traffic diversion plan, Rate Analysis, Cost Estimate, BOQ, Interpretation of Test Results, Correlation of Theoretical and Field
Results, Rehabilitation Measures, Report Preparation Etc. for 3 Flyovers/Bridges Under Hoogly River Bridge Commissioners (HRBC)- Kolkata , Govt. of West Bengal" - BOQ for Structural Health Assessment
Project of 3 Nos. Flyovers/Bridges at Kolkata - (i) Nagerbazar flyover, (ii) Cossipore & Lockgate flyover) & (iii) Kidderpore new flyover).
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to
enter the Bidder Name and Values only )
Note:- 1-Annexur-B of Tender Document shall also be reffered prior to Quote the Rates.
2- Rates shall be quoated excluding GST. GST Rate/Amount shall not be considered for evaluation of financial Bid.
3-GST shall be paid over and above the quoted price at the current applicable rate i.e. 18%.
1 2 4 5 6 7 8
Updation of NDT marking plan as provided by RITES, by visual inspection
through a bridge expert and videographer, using its own means to cover
areas of high distress & abnormal variations in structure prior to start of NDT
1 activity. Submission of detailed investigation plan along with updated NDT 3 No. of flyovers 25000.00 75000.00 INR Seventy Five Thousand Only
marking plan within 10 days from the date of initiation of work for approval of
RITES. Mapping over the structural members at the site with good quality
paint (for visibility at day & night) with indication of width, length and depth.
2 NDT FOR RCC STRUCTURES
3.01 Liquid Penetration Testing : To reveal surface breaking flaws by bleed out
of a colored or fluorescent dye from the flaw as per ASME standards refers
400 Nos 500.00 200000.00 INR Two Lakh Only
to the ASME Code Section V Article 6 and ASME VIII Div 1 Appendix 8 and
other relevant sections/guidelines.
3.02 Ultrasonic Pulse Eco Testing of Metallic Sections:- For assessment of
welding/joints assessment of Steel Plates/Tube/Pipe Weld/Forging/Casting 400 Nos 1000.00 400000.00 INR Four Lakh Only
3.04 Magnetic Particle Testing Ferrous Metals as per ASTM-709, 1995; ASME
Sec-5, 200; ASTM A275 range(Up to 3mm depth) to assess the 440 Nos 500.00 220000.00 INR Two Lakh Twenty Thousand Only
cracks/joints/welding conditions rang
3.05 UT Thickness for Steel Section Size Assessment:- Local thickness of a
solid/hollow element based on the time taken by the ultrasound wave to
190 Nos 500.00 95000.00 INR Ninety Five Thousand Only
return to the surface as per ASTM E797 / E797M for section detailing of steel
members.
3.06 Hardness Testing of metals: Hardness of Ferrous & Non-ferrous
Metals/Alloys Vickers 80-94; HRC 17.9-68.5 HRB 13.5-99.5, LD 200-900, 40 Nos 400.00 16000.00 INR Sixteen Thousand Only
HB 82.0-940.0 to get the type of material and its estimated tensile strength.
3.07 Inspecting torque/Tension on Nut/ Bolt: To determine the torque to a
fasten nut or bolt permits proper tension and loading wherever bolts are
loose and found deteriorated. Check torque applied to the nut/bolt so it can
be matched to the specifications as per codal requirement IS 6623: 2004.
Also check the gap between bolt/nut using filler gauge. When nuts and bolts 10 Nos 8000.00 80000.00 INR Eighty Thousand Only
are fastened together under load the action of tightening the nut increases
the force applied to the bolt causing elongation. Bolt tension monitors should
be also used to accurately measure the elongation, stress, and %strain of
the bolt during traffic load in 5% intact bolts.
3.08 Mechanical Testing of Loosened Bolt : To evaluate the mechanical
properties like Tensile Strength and Shear Strength of the bolt and to 12 Nos 4000.00 48000.00 INR Forty Eight Thousand Only
evaluate the grade of bolt.
3.09 Radiography test for weld/lamination, as per field requirement. Test should
be conducted the conducted under the supervision of approved radioactive 9 Nos 10000.00 90000.00 INR Ninety Thousand Only
system operator (license holder from Govt.).
2197
508
5.01 Specialized consulting firm /Agency shall prepare and submit the DPR of
each flyovers/bridge in 3 copies which includes all inspection and NDT
results, interpretation of test results, load test reports, conclusion, site
photographs,
h t h scheme
h for
f repair/rehabilitation/
i / h bilit ti / retro-fitting
t fitti works
k with
ith BOQ
and Rate analysis, technical Specifications, design and execution drawing
3 No. of flyovers 150000.00 450000.00 INR Four Lakh Fifty Thousand Only
(feasible and economic options) for rehabilitation/strengthening of flyovers,
improvement of drainage system, traffic diversion plan, bridge inspection and
maintenance manual including QAP, safety and environmental plan. HD
quality site photographs and Video during inspection & testing shall be
provided in a good quality CD/DVD/USB hard disk..
Quoted Rate in Words INR Eighty One Lakh Five Thousand Eight Hundred & Sixty Two Only
2343
508
Name of Work: E- Tender for "Conducting NDT, Load Testing, preparation of Traffic diversion plan, Rate Analysis, Cost Estimate, BOQ, Interpretation of Test Results, Correlation of Theoretical and Field Results,
Rehabilitation Measures, Report Preparation Etc. for 3 Flyovers/Bridges Under Hoogly River Bridge Commissioners (HRBC)- Kolkata , Govt. of West Bengal" - BOQ for Structural Health Assessment Project of 3
Nos. Flyovers/Bridges at Kolkata - (i) Nagerbazar flyover, (ii) Cossipore & Lockgate flyover) & (iii) Kidderpore new flyover).
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter
the Bidder Name and Values only )
Note:- 1-Annexur-B of Tender Document shall also be reffered prior to Quote the Rates.
2- Rates shall be quoated excluding GST. GST Rate/Amount shall not be considered for evaluation of financial Bid.
3-GST shall be paid over and above the quoted price at the current applicable rate i.e. 18%.
1 2 4 5 6 7 8
Updation of NDT marking plan as provided by RITES, by visual inspection
through a bridge expert and videographer, using its own means to cover areas
of high distress & abnormal variations in structure prior to start of NDT activity.
1 Submission of detailed investigation plan along with updated NDT marking plan 3 No. of flyovers 25000.00 75000.00 INR Seventy Five Thousand Only
within 10 days from the date of initiation of work for approval of RITES.
Mapping over the structural members at the site with good quality paint (for
visibility at day & night) with indication of width, length and depth.
2 NDT FOR RCC STRUCTURES
2.01 Rebound Hammer Test: For determining the estimated compressive strength
of concrete and uniformity of concrete in terms of surface hardness as per IS
13311 (Part-2)-1992, also establishing correlation chart between rebound 330 Nos 175.00 57750.00 INR Fifty Seven Thousand Seven Hundred & Fifty Only
hammer and other confirmatory test for estimated in-situ strength of concrete if
required.
2.02 Ultrasonic Pulse Velocity Test: for ascertaining the quality of concrete,
INR One Lakh Twenty Five Thousand Four Hundred
soundness and density of concrete, uniformity of concrete in terms of density 330 Nos 380.00 125400.00
Only
as per IS 13311 (Part-1)-1992.
2.03 CORE Sampling and Testing (Partially Destructive Test): Extracting the
concrete core samples at select locations from RCC members of the
structures covered under the study and evaluating the properties fck value,
grade of concrete in the laboratory from the core samples selected. IS
456:2000; IS516:1959, IS 1199:2002; without encountering any steel
18 Nos. of Set 12000.00 216000.00 INR Two Lakh Sixteen Thousand Only
reinforcement from the RCC members at specified locations by site in-charge
with portable power driven core cutting equipment. After extraction of core
from the structures, each core extraction/cutting location shall be filled with
epoxy materials asper standard practice and codal guide lines.
(1 Set = 3 Nos. of Core)
2344
508
3.01 Liquid Penetration Testing : To reveal surface breaking flaws by bleed out of
a colored or fluorescent dye from the flaw as per ASME standards refers to the
400 Nos 500.00 200000.00 INR Two Lakh Only
ASME Code Section V Article 6 and ASME VIII Div 1 Appendix 8 and other
relevant sections/guidelines.
3.02 Ultrasonic Pulse Eco Testing of Metallic Sections:- For assessment of
welding/joints assessment of Steel Plates/Tube/Pipe Weld/Forging/Casting as 400 Nos 1000.00 400000.00 INR Four Lakh Only
3.03 Dry Film Thickness:- Dry film / Coating thickness of external surface
materials (paint, anti-corrosive coating etc..) on Ferrous and Non-ferrous 190 Nos 250.00 47500.00 INR Forty Seven Thousand Five Hundred Only
Metals/Alloys as per IS: 3023 Up to 1000 micron.
3.04 Magnetic Particle Testing Ferrous Metals as per ASTM-709, 1995; ASME
Sec-5, 200; ASTM A275 range(Up to 3mm depth) to assess the 440 Nos 500.00 220000.00 INR Two Lakh Twenty Thousand Only
cracks/joints/welding conditions rang
3.05 UT Thickness for Steel Section Size Assessment:- Local thickness of a
solid/hollow element based on the time taken by the ultrasound wave to return
190 Nos 500.00 95000.00 INR Ninety Five Thousand Only
to the surface as per ASTM E797 / E797M for section detailing of steel
members.
3.06 Hardness Testing of metals: Hardness of Ferrous & Non-ferrous
Metals/Alloys Vickers 80-94; HRC 17.9-68.5 HRB 13.5-99.5, LD 200-900, HB 40 Nos 400.00 16000.00 INR Sixteen Thousand Only
82.0-940.0 to get the type of material and its estimated tensile strength.
3.07 Inspecting torque/Tension on Nut/ Bolt: To determine the torque to a fasten
nut or bolt permits proper tension and loading wherever bolts are loose and
found deteriorated. Check torque applied to the nut/bolt so it can be matched
to the specifications as per codal requirement IS 6623: 2004. Also check the
gap between bolt/nut using filler gauge. When nuts and bolts are fastened 10 Nos 8000.00 80000.00 INR Eighty Thousand Only
together under load the action of tightening the nut increases the force applied
to the bolt causing elongation. Bolt tension monitors should be also used to
accurately measure the elongation, stress, and %strain of the bolt during traffic
load in 5% intact bolts.
3.08 Mechanical Testing of Loosened Bolt : To evaluate the mechanical
properties like Tensile Strength and Shear Strength of the bolt and to evaluate 12 Nos 4000.00 48000.00 INR Forty Eight Thousand Only
the grade of bolt.
3.09 Radiography test for weld/lamination, as per field requirement. Test should be
conducted the conducted under the supervision of approved radioactive 9 Nos 10000.00 90000.00 INR Ninety Thousand Only
system operator (license holder from Govt.).
2346
508
5.01 Specialized consulting firm /Agency shall prepare and submit the DPR of
each flyovers/bridge in 3 copies which includes all inspection and NDT
results, interpretation of test results, load test reports, conclusion, site
p g p , scheme for repair/rehabilitation/
photographs, p g works with BOQ
retro-fitting Q and
Rate analysis, technical Specifications, design and execution drawing (feasible
3 No. of flyovers 150000.00 450000.00 INR Four Lakh Fifty Thousand Only
and economic options) for rehabilitation/strengthening of flyovers,
improvement of drainage system, traffic diversion plan, bridge inspection and
maintenance manual including QAP, safety and environmental plan. HD quality
site photographs and Video during inspection & testing shall be provided in a
good quality CD/DVD/USB hard disk..
Quoted Rate in Words INR Seventy Lakh Eighty Two Thousand Five Hundred & Seventy Only
2857
508
Name of Work: E- Tender for "Conducting NDT, Load Testing, preparation of Traffic diversion plan, Rate Analysis, Cost Estimate, BOQ, Interpretation of Test Results, Correlation of Theoretical and Field
Results, Rehabilitation Measures, Report Preparation Etc. for 3 Flyovers/Bridges Under Hoogly River Bridge Commissioners (HRBC)- Kolkata , Govt. of West Bengal" - BOQ for Structural Health Assessment
Project of 3 Nos. Flyovers/Bridges at Kolkata - (i) Nagerbazar flyover, (ii) Cossipore & Lockgate flyover) & (iii) Kidderpore new flyover).
PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to
enter the Bidder Name and Values only )
Note:- 1-Annexur-B of Tender Document shall also be reffered prior to Quote the Rates.
2- Rates shall be quoated excluding GST. GST Rate/Amount shall not be considered for evaluation of financial Bid.
3-GST shall be paid over and above the quoted price at the current applicable rate i.e. 18%.
1 2 4 5 6 7 8
Updation of NDT marking plan as provided by RITES, by visual inspection
through a bridge expert and videographer, using its own means to cover
areas of high distress & abnormal variations in structure prior to start of NDT
1 activity. Submission of detailed investigation plan along with updated NDT 3 No. of flyovers 25000.00 75000.00 INR Seventy Five Thousand Only
marking plan within 10 days from the date of initiation of work for approval of
RITES. Mapping over the structural members at the site with good quality
paint (for visibility at day & night) with indication of width, length and depth.
2 NDT FOR RCC STRUCTURES
3.01 Liquid Penetration Testing : To reveal surface breaking flaws by bleed out
of a colored or fluorescent dye from the flaw as per ASME standards refers
400 Nos 500.00 200000.00 INR Two Lakh Only
to the ASME Code Section V Article 6 and ASME VIII Div 1 Appendix 8 and
other relevant sections/guidelines.
3.02 Ultrasonic Pulse Eco Testing of Metallic Sections:- For assessment of
welding/joints assessment of Steel Plates/Tube/Pipe Weld/Forging/Casting 400 Nos 1000.00 400000.00 INR Four Lakh Only
3.04 Magnetic Particle Testing Ferrous Metals as per ASTM-709, 1995; ASME
Sec-5, 200; ASTM A275 range(Up to 3mm depth) to assess the 440 Nos 500.00 220000.00 INR Two Lakh Twenty Thousand Only
cracks/joints/welding conditions rang
3.05 UT Thickness for Steel Section Size Assessment:- Local thickness of a
solid/hollow element based on the time taken by the ultrasound wave to
190 Nos 500.00 95000.00 INR Ninety Five Thousand Only
return to the surface as per ASTM E797 / E797M for section detailing of steel
members.
3.06 Hardness Testing of metals: Hardness of Ferrous & Non-ferrous
Metals/Alloys Vickers 80-94; HRC 17.9-68.5 HRB 13.5-99.5, LD 200-900, 40 Nos 400.00 16000.00 INR Sixteen Thousand Only
HB 82.0-940.0 to get the type of material and its estimated tensile strength.
3.07 Inspecting torque/Tension on Nut/ Bolt: To determine the torque to a
fasten nut or bolt permits proper tension and loading wherever bolts are
loose and found deteriorated. Check torque applied to the nut/bolt so it can
be matched to the specifications as per codal requirement IS 6623: 2004.
Also check the gap between bolt/nut using filler gauge. When nuts and bolts 10 Nos 8000.00 80000.00 INR Eighty Thousand Only
are fastened together under load the action of tightening the nut increases
the force applied to the bolt causing elongation. Bolt tension monitors should
be also used to accurately measure the elongation, stress, and %strain of
the bolt during traffic load in 5% intact bolts.
3.08 Mechanical Testing of Loosened Bolt : To evaluate the mechanical
properties like Tensile Strength and Shear Strength of the bolt and to 12 Nos 4000.00 48000.00 INR Forty Eight Thousand Only
evaluate the grade of bolt.
3.09 Radiography test for weld/lamination, as per field requirement. Test should
be conducted the conducted under the supervision of approved radioactive 9 Nos 10000.00 90000.00 INR Ninety Thousand Only
system operator (license holder from Govt.).
2860
508
5.01 Specialized consulting firm /Agency shall prepare and submit the DPR of
each flyovers/bridge in 3 copies which includes all inspection and NDT
results, interpretation of test results, load test reports, conclusion, site
photographs,
h t h scheme
h for
f repair/rehabilitation/
i / h bilit ti / retro-fitting
t fitti works
k with
ith BOQ
and Rate analysis, technical Specifications, design and execution drawing
3 No. of flyovers 150000.00 450000.00 INR Four Lakh Fifty Thousand Only
(feasible and economic options) for rehabilitation/strengthening of flyovers,
improvement of drainage system, traffic diversion plan, bridge inspection and
maintenance manual including QAP, safety and environmental plan. HD
quality site photographs and Video during inspection & testing shall be
provided in a good quality CD/DVD/USB hard disk..
Quoted Rate in Words INR Eighty Eight Lakh Seventy Thousand Three Hundred & Fifty Nine Only