For G3 A and B UG Students Max Mark: 20% Max Group Member is 8 Directly copy from other group will disqualify your work. Group I 1. What is force? Describe how we can measure a force. 2. Explain about the following devices used for determination of force with neat sketch. Cantilever Beams Load Cell Proving Rings Differential Transformers Group II 1. Define Torque and describe why we need to measure it. 2. Explain the following devices used to measure torque with neat sketch Torsion-bar Dynamometer Servo-controlled Dynamometer Absorption Dynamometer Group III 1. Describe the temperature measurements and its methods of measurement 2. Explain thermocouples and the different laws of thermocouples 3. What are the advantages and disadvantages of thermocouple? Group IV 1. Describe about the following Pressure measurement Pressure Measurement Scales Methods of Pressure Measurement At least you have mention 3 references at the end of your document NB: Submission date is Jan. 4/2023 ARBA MINCH UNIVERSITY
INSTITUTE OF TECHNOLOGY
FACULTY OF MECHANICAL AND PRODUCTION ENGINEERING
Instrumentation and Measurement Individual Assignment FOR G3 Section A and B
Max Mark 5% Directly copy from other group will disqualify your work. 1. An analog indicating instrument with a scale range of 0 - 5.0 V shows a voltage of 2.65 V. The true value of a voltage is 2.70 volts. a. What are the values of absolute error and correction? b. Express the error as a function of the true value and full scale deflection. 2. A pressure gauge of range 50 bar is stated to have an error of 0.15 bar when calibrated by manufacturer. Determine a) The percentage error on the basis of maximum full scale value. b) The possible error as the percentage of the indicated value when a reading of 10 bar obtained. 3. A pressure indicator showed a reading as 89 bar on scale reading of 0 – 100 bar. If the true value was 88.5 bar, determine; a. static error b. static correction c. relative static error 4. An analogue indicating instrument with scale range of 0 – 10.0V shows a voltage of 5.30V. The true value of voltage is 5.40 volts. a. what are the values of static error and correction? b. Express the error as a function of the true value and full scale deflection.