Professional Documents
Culture Documents
Name:___________________________________ ID NO.__________________
School:_________________________________ Date:_______ Score:_________
a. 1 m
b. 1.8 m
c. 2.5 m
d. 3 m
e. 6 m
9. A type of gate valve that provides visual indication of valve position because the
stem is attached to gate.
a. Rising stem
b. Non-rising stem
c. bolted type
d. pressure seal bonnet
e. Sluice valve
10. Copper tube are sized
a. 1/8 bigger than their inside diameter
b. 1/4 bigger than their inside diameter
c. 1/6 bigger than their inside diameter
d. 1/3 bigger than their inside diameter
e. 1/2 bigger than their inside diameter
11. SDR of pipe means.
a. Standard dimensional ratio
b. Statistical dimensional rating
c. Standard diameter rate
d. Sewer discharge rating
e. Sewage disposal risk
12. Which of the following is not suited for use in hot water line.
a. copper
b. CPVC
c. PEX
d. PB
e. ABS
13. Which of the following is the most common type of gate valve wedge?
a. solid wedge
b. flexible wedge
c. split type wedge
d. all of the above
e. none of the above
14. Material specification used for PVC Cold Water.
a. D2729
c. ISO4422
b. PNS65
d. D2846
e. none of the above
15. Process use to make soft coppers.
a. Tuberculation
b. Fusion Welding
c. Annealing
d. Galvanization
e. Soldering
PRACTICAL PROBLEMS – PLUMBING MATERIALS
BOARD FOR MASTER PLUMBER – FEB 2021
Instructor: Lorenzo Ray N. Tanael, rla, rmp, renp, rreb, rrea