Professional Documents
Culture Documents
Product Features The ADTRAN® DSU III DBU™ RM, a feature- also provides DTE-to-service rate matching,
■ Automatic switched rich rackmount data service unit/channel for dedicated and switched DBU modes.
DBU upon failure of service unit (DSU/CSU), provides an inter- This feature allows slower rate DTE equip-
dedicated service face between the digital data service (DDS) ment to communicate over a higher speed
■ Two backup options and the customer’s data terminal equipment digital line.
available: V.34 analog (DTE) while providing automatic switched The DSU III DBU requires an ADTRAN
and 1B+D ISDN dial backup (DBU) of the dedicated circuit. Smart 16/16e shelf which is available in AC or
■ Synchronous or The DSU III DBU offers two DBU options: DC versions with single or dual power inputs
a synchronous V.34 analog, and 1B+D ISDN. When the DSU for greater reliability. The DSU III DBU can be
(including 57.6 kbps)
III DBU is configured for dedicated service configured through the Smart 16/16e shelf
modes of operation
with switched DBU, the network manager controller card from a local/remote VT 100
■ EIA-232 and V.35 can adjust and configure the parameters terminal or from an ADTRAN DATAMATE . TM
DTE interfaces
which control when a dial backup is initiated. The DSU III DBU can also be configured
■ DTE-to-service rate As the primary line degrades beyond the using AT or V.25 bis commands. In a Smart 16e
matching feature allows configured performance level or fails, the shelf, the DBU card can be configured with a
slower DTE devices to
communicate over higher DSU automatically initiates connection to remote telnet session via the 10Base-T
rate service offerings the remote unit over the switched network. Ethernet port.
Upon restoral of the primary DDS circuit, The DSU III DBU supports standard loop-
■ Manual and automatic
dialing capability the unit reverts to the primary DDS circuit back commands from the telephone company
either automatically or manually as config- central office for testing. Front panel LEDs
■ Auto answer of
ured by the network manager. display test status, alarms, and errors during a
incoming calls
The DSU III DBU supports synchronous test and DBU session. Automatic service rate
■ Industry-leading five-year
North American warranty operations at rates of 2.4, 4.8, 9.6, 19.2, 38.4, and pair reversal detection enable quick and
56 and 64 kbps and asynchronous data rates easy installation.
of 2.4, 4.8, 9.6, 19.2, 38.4, and 57.6 kbps. The The DSU III rackmount card is also avail-
DTE interface can be selected as either EIA- able without a DBU option.
232 or V.35 for all data rates. The DSU III DBU
ADTRAN, Inc.
Attn: Enterprise Networks
DSU III DBU
901 Explorer Boulevard Rackmount DSU/CSU with Switched Dial Backup
Huntsville, AL 35806
Test patterns
■ 2047, 511, DDS stress patterns 1-4
Environment
Operating Temperature
■ 0° to 50° C, (32° to 122° F)
Storage Temperature
■ –20° to 70° C, (–4° to 158° F)
Relative Humidity
■ Up to 95%, non-condensing
ADTRAN is an
ISO 9001: 2000 certified supplier.
ADTRAN is a
TL 9000 3.0 certified supplier.
Specifications subject to change without notice. DATAMATE and DSU III DBU are
61200076L1-8A May 2002 trademarks of ADTRAN, Inc. ADTRAN is a registered trademark of ADTRAN, Inc.
Copyright © 2004 ADTRAN, Inc. All registered trademarks and trademarks mentioned in this publication are the
All rights reserved. property of their respective owners.