Professional Documents
Culture Documents
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSBB30CH60C Motion SPM® 3 Series
February 2016
FSBB30CH60C
Motion SPM® 3 Series
Features General Description
• UL Certified No. E209204 (UL1557) FSBB30CH60C is an advanced Motion SPM® 3 module
providing a fully-featured, high-performance inverter out-
• 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate
put stage for AC Induction, BLDC, and PMSM motors.
Drivers and Protection
These modules integrate optimized gate drive of
• Low-Loss, Short-Circuit Rated IGBTs the built-in IGBTs to minimize EMI and losses, while also
providing multiple on-module protection features includ-
• Very Low Thermal Resistance Using AlN DBC Sub-
ing under-voltage lockouts, over-current shutdown, and
strate
fault reporting. The built-in, high-speed HVIC requires
• Built-in Bootstrap Diodes and Dedicated Vs Pins Sim- only a single supply voltage and translates the incoming
plify PCB Layout logic-level gate inputs to the high-voltage, high-current
• Separate Open-Emitter Pins from Low-Side IGBTs for drive signals required to properly drive the module's
Three-Phase Current Sensing internal IGBTs. Separate negative IGBT terminals are
available for each phase to support the widest variety of
• Single-Grounded Power Supply control algorithms.
• Isolation Rating: 2500 Vrms / min.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9044 - Motion SPM® 3 Series Users Guide
Pin Configuration
P (27)
(19) VB(W)
VB
(18) VCC(H)
VCC OUT
COM
(17) IN(WH)
IN VS W (26)
(20) VS(W)
(15) VB(V)
VB
(14) VCC(H)
VCC
OUT
COM
(13) IN(VH)
IN VS V (25)
(16) VS(V)
(11) VB(U)
VB
(10) VCC(H)
VCC OUT
(9) IN(UH) COM
IN VS U (24)
(12) VS(U)
(8) CSC
C(SC) OUT(WL)
(7) CFOD
C(FOD) NW (23)
(6) VFO
VFO
(5) IN(WL)
IN(WL) OUT(VL)
(4) IN(VL)
IN(VL) NV (22)
(3) IN(UL)
IN(UL)
(2) COM
COM
(1) VCC(L) OUT(UL)
VCC
VSL NU (21)
Inverter Part
Symbol Parameter Conditions Rating Unit
VPN Supply Voltage Applied between P - NU, NV, NW 450 V
VPN(Surge) Supply Voltage (Surge) Applied between P - NU, NV, NW 500 V
VCES Collector - Emitter Voltage 600 V
± IC Each IGBT Collector Current TC = 25°C, TJ ≤ 150°C 30 A
± ICP Each IGBT Collector Current (Peak) TC = 25°C, TJ ≤ 150°C, Under 1 ms Pulse 60 A
Width
PC Collector Dissipation TC = 25°C per Chip 106 W
TJ Operating Junction Temperature (2nd Note 1) -40 ~ 150 °C
2nd Notes:
1. The maximum junction temperature rating of the power chips integrated within the Motion SPM® 3 product is 150° C (at TC ≤ 125°C).
Control Part
Symbol Parameter Conditions Rating Unit
VCC Control Supply Voltage Applied between VCC(H), VCC(L) - COM 20 V
VBS High-Side Control Bias Voltage Applied between VB(U) - VS(U), VB(V) - VS(V), 20 V
VB(W) - VS(W)
VIN Input Signal Voltage Applied between IN(UH), IN(VH), IN(WH), -0.3 ~ VCC + 0.3 V
IN(UL), IN(VL), IN(WL) - COM
VFO Fault Output Supply Voltage Applied between VFO - COM -0.3 ~ VCC + 0.3 V
IFO Fault Output Current Sink Current at VFO pin 5 mA
VSC Current-Sensing Input Voltage Applied between CSC - COM -0.3 ~ VCC + 0.3 V
Total System
Symbol Parameter Conditions Rating Unit
VPN(PROT) Self-Protection Supply Voltage Limit VCC = VBS = 13.5 ~ 16.5 V 400 V
(Short-Circuit Protection Capability) TJ = 150°C, Non-Repetitive, < 2 μs
TC Module Case Operation Temperature -40°C ≤ TJ ≤ 150°C, See Figure 2 -40 ~ 125 °C
TSTG Storage Temperature -40 ~ 125 °C
VISO Isolation Voltage 60 Hz, Sinusoidal, AC 1 Minute, Connect 2500 Vrms
Pins to Heat Sink Plate
Thermal Resistance
Symbol Parameter Conditions Min. Typ. Max. Unit
Rth(j-c)Q Junction to Case Thermal Resistance Inverter IGBT Part (per 1 / 6 module) - - 1.17 °C / W
Rth(j-c)F Inverter FWDi Part (per 1 / 6 module) - - 1.87 °C / W
2nd Notes:
2. For the measurement point of case temperature (TC), please refer to Figure 2.
Control Part
Symbol Parameter Conditions Min. Typ. Max. Unit
IQCCL Quiescent VCC Supply VCC = 15 V VCC(L) - COM - - 23 mA
Current IN(UL, VL, WL) = 0 V
IQCCH VCC = 15 V VCC(H) - COM - - 600 μA
IN(UH, VH, WH) = 0 V
IQBS Quiescent VBS Supply VBS = 15 V VB(U) - VS(U), VB(V) - VS(V), - - 500 μA
Current IN(UH, VH, WH) = 0 V VB(W) - VS(W)
VFOH Fault Output Voltage VSC = 0 V, VFO Circuit: 4.7 kΩto 5 V Pull-up 4.5 - - V
VFOL VSC = 1 V, VFO Circuit: 4.7 kΩto 5 V Pull-up - - 0.8 V
VSC(ref) Short-Circuit Current VCC = 15 V (2nd Note 4) 0.45 0.50 0.55 V
Trip Level
TSD Over-Temperature Temperature at LVIC - 160 - °C
Protection
ΔTSD Over-Temperature Temperature at LVIC - 5 - °C
Protection Hysterisis
UVCCD Supply Circuit Detection Level 10.7 11.9 13.0 V
Under-Voltage Protection
UVCCR Reset Level 11.2 12.4 13.4 V
UVBSD Detection Level 10 11 12 V
UVBSR Reset Level 10.5 11.5 12.5 V
tFOD Fault-Out Pulse Width CFOD = 33 nF (2nd Note 5) 1.0 1.8 - ms
VIN(ON) ON Threshold Voltage Applied between IN(UH), IN(VH), IN(WH), IN(UL), 2.8 - - V
IN(VL), IN(WL) - COM
VIN(OFF) OFF Threshold Voltage - - 0.8 V
2nd Notes:
4. Short-circuit protection is functioning only at the low-sides.
5. The fault-out pulse width tFOD depends on the capacitance value of CFOD according to the following approximate equation: CFOD = 18.3 x 10-6 x tFOD [F]
trr
V CE IC IC V CE
V IN V IN
0
tON tOFF
tC(ON) tC(OFF)
SWITCHING LOSS(ON) VS. COLLECTOR CURRENT SWITCHING LOSS(OFF) VS. COLLECTOR CURRENT
2200 900
VCE=300V VCE=300V
2000 V =15V 800 VCC=15V
CC
SWITCHING LOSS, ESW(OFF) [uJ]
SWITCHING LOSS, ESW(ON) [uJ]
1200 500
1000 400
800
300
600
200
400
100
200
0 0
0 3 6 9 12 15 18 21 24 27 30 33 0 3 6 9 12 15 18 21 24 27 30 33
0.9
0.8
0.7
0.6
0.5
IF [A]
0.4
0.3
0.2
0.1
o
TC=25 C
0.0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
VF [V]
(+)
(+)
Input Signal
Output Current
a5
Fault Output Signal
a1 : Control supply voltage rises: after the voltage rises UVCCR, the circuits start to operate when next input is applied.
a2 : Normal operation: IGBT ON and carrying current.
a3 : Under-voltage detection (UVCCD).
a4 : IGBT OFF in spite of control input condition.
a5 : Fault output operation starts.
a6 : Under-voltage reset (UVCCR).
a7 : Normal operation: IGBT ON and carrying current.
Input Signal
Output Current
b1 : Control supply voltage rises: after the voltage reaches UVBSR, the circuits start to operate when next input is applied.
b2 : Normal operation: IGBT ON and carrying current.
b3 : Under-voltage detection (UVBSD).
b4 : IGBT OFF in spite of control input condition, but there is no fault output signal.
b5 : Under-voltage reset (UVBSR).
b6 : Normal operation: IGBT ON and carrying current.
Figure 9. Under-Voltage Protection (High-Side)
Internal IGBT c4
Gate - Emitter Voltage c3
c2
SC
c1
Output Current c8
SC Reference Voltage
Sensing Voltage
of Shunt Resistance
CR Circuit Time
Constant Delay
Fault Output Signal c5
SPM
RPF = 4.7 ㏀
100 Ω
IN(UH) , IN(VH) , IN(WH)
100 Ω
MCU IN (UL) , IN (VL) , IN(WL)
100 Ω VFO
1 nF 1 nF 1 nF
CPF = 1 nF
COM
One-Leg Diagram of
Motion SPM 3 Product
P
Vcc VB
0.1 µF
15 V IN HO
22 µF COM VS
Inverter
Vcc Output
1000 µF 1 µF IN OUT
COM VSL
(15) V B(V)
VB
(14) V CC(H)
VCC
OUT
RS COM
C BS C BSC (13) IN (VH)
Gating VH IN VS
C PS (16) V S(V)
V (25)
M
M (11) V B(U)
(10) V CC(H)
VB
VCC C DCS Vdc
C Gating UH
RS C BS C BSC (9) IN (UH) COM
IN
OUT
VS U (24)
(12) V S(U)
U C PS
RF
R PF
C SC (8) CSC
C(SC) OUT(WL)
(7) C FOD
C(FOD) R SW
RS C FOD N W (23)
(6) V FO
Fault VFO
RS (5) IN(WL)
Gating WL IN(WL) OUT(VL)
RS (4) IN (VL)
Gating VL IN(VL) NV (22) R SV
RS (3) IN(UL)
Gating UL IN(UL)
(2) COM
C BPF C PS C PS C PS C PF COM
(1) V CC(L) OUT(UL)
VCC R SU
VSL N U (21)
C SP15 C SPC15
C FW CFV C FU
Authorized Distributor
onsemi:
FSBB30CH60C