Professional Documents
Culture Documents
Description:
A self-priming, high solid, high build epoxy polyaminoamide adduct cured, which forms a tough anticorrosive coating for heavy duty
atmospheric systems with excellent adhesion on damp surfaces. The two packs product consists of resin base and hardener supplied in
pre-weighed quantities ready for use and mixing on site.
Recommended Use:
As a primer/intermediate coat on damp surfaces, maintenance and steel structures as well as under exposure service, where high
performance corrosion and chemical resistance are required. In particular “JAZEERA DAMP MASTIC” can be used in tanks, vessels, pipes,
ships, offshore, marine structure, bridges and chemical plants.
Characteristics:
• Excellent adhesion on damp surfaces
• High build high solid self-priming coat.
• High chemical and abrasion resistance.
• Low VOC.
• Excellent resistance to corrosion.
Physical Constants:
• Finish: Semi gloss
• Color: Grey
• Volume Solid: 85±2% ASTM D2697.
• No. Of Components : 2 components.
• Specific Gravity: 1.42±0.02 ASTM D1475.
• Service Temperature : Maximum 120°C/248°F dry exposure only.
• D.F.T: 150 µm per coat
• Theoretical Spreading Rate: 5.67 m²/L @ DFT 150 µm
• VOC: 149 g/L.
Surface Preparation:
• New Steel
-Remove all oil, grease, dirt, soil, drawing and other soluble contaminants using a solvent cleaning method, according to SSPC-SP1.
-Remove rust, or mill scale, and other foreign matter using hand, or power tool cleaning as per SSPC-SP (2, 3).
-Abrasive blast cleaning to near- white metal is required referring to (NACE No.2/SSPC-SP 10) or (Sa 2 ½) (ISO 8501).
-Surface profile required to be min. 2 G/S (Keane-Tator Comparator), or rough medium (G) (ISO Comparator).
-Cleanliness after preparation is important, and residual traces of abrasive must be blown off, vacuumed, or swept away before primer
coating.
• Repair and Maintenance:
-The surface should be cleaned using high pressure fresh water to remove all contaminants and salt. In case of old paints, adherent mill scale,
damage area, and weld seams, should be blast cleaned according to SSPC-SP (5, 6, 7) leaving the metal uniformly white or grey in appearance.
• Galvanized Steel:
-Loosely adherent or powdery salts should always be removed by water washing before painting.
-Galvanized surfaces should be sweep blasted according to SSPC (11) to roughen the surface prior to painting, or blast cleaning before coating
to provide good adhesion.
• Light Alloys:
-The surface should be lightly blasted or wire brushed to remove powdery or loosely adherent aluminium salts before coating.
-Surface treatment with a special aluminium treatment (e.g., etch primer) may be required before coating.
Application Date:
Mixing ratio: By volume: Base Hardener
4 : 1
Pot-life: 25ºC/77ºF 40ºC/104ºF
2½ hrs. 1½ hrs.
Induction time: Not required.
Application Condition:
• Temperature during application should be more than (5°C).
• Surface temperature: at least (3°C) above dew point.
• Relative humidity: maximum 85%.
Painting System :
Primers: “JAZEERA DAMP MASTIC” is self-priming mastic.
Topcoats: It’s possible to be coated by the following products:
-JAZEERA ACRYTHANE 60.
-JAZEERA EPOXY FINISH.
Packing:
Packing: Packed in: Base Hardener
Gallon 4 Ltr : 1 Ltr
Drum 14.4 Ltr : 2.88 Ltr
• Health and safety:Please read and follow the precautionary notices displayed on the container, and all caution statements on the MSDS
of this product.During application of paint, contact of liquid paint with eyes, skin, inhalation of paint mist and paint vapor should be strongly
avoided.For spray application systems; applicator should wear protective clothing, gloves, also eye, skin and respiratory protection are
always recommended Keep away from reach of children.
• Ventilation: When used in enclosed areas, thoroughair circulation must be used during and afterapplication until the coating is cured. In
addition, respirators must be used by all applicator.
• Caution: This product contains flammable solvents, keep away from sparks and open flame. For information on LEL and TLV, please read
the MSDS.
• Environmental safety: Please donate the leftover paint and packaging to your local authorized institution for usage or recycling purpose.
• Note: Wastes and empty containers should be disposed of in accordance with local regulations made under the Control of Pollution Act
and the Environmental Protection Act.
Disclaimer:
To the best of our knowledge the technical data listed herein is true and accurate up to publication date and is subject to change
without prior notice. User must contact Jazeera Paints Company to verify of any modifications before specifying or ordering the
product. Thus, information given in this sheet is not intended to be exhaustive and any person using the product other than the
recommendations in this sheet or without reverting to our Jazeera TSD, he should take his accountability in this connection.
As we are not capable to control the quality and the substrate's conditions as well as the factors that affect on using, or applying the
product, so we never give any written or implied guarantee in these documents, but we guarantee our products to conform to Jazeera
quality while we assume no responsibility for coverage, performance or injuries resulting from application. Liability "if any" is limited
to replace the products mentioned above.