This document outlines 16 specifications for a poret PPI 20 tender for polyurethane foam air filters. The filters must: 1) Be made of polyurethane foam on a polyether basis. 2) Use depth and surface filtration. 3) Hold over 5000g of dust per sheet. 4) Be washable at least 6 times over 24 months. 5) Maintain a rigid structure even when soaked with water.
This document outlines 16 specifications for a poret PPI 20 tender for polyurethane foam air filters. The filters must: 1) Be made of polyurethane foam on a polyether basis. 2) Use depth and surface filtration. 3) Hold over 5000g of dust per sheet. 4) Be washable at least 6 times over 24 months. 5) Maintain a rigid structure even when soaked with water.
This document outlines 16 specifications for a poret PPI 20 tender for polyurethane foam air filters. The filters must: 1) Be made of polyurethane foam on a polyether basis. 2) Use depth and surface filtration. 3) Hold over 5000g of dust per sheet. 4) Be washable at least 6 times over 24 months. 5) Maintain a rigid structure even when soaked with water.
1. Material Polyurethane foam on polyether basis 2. Depth filtration combined with surface filtration 3. High dust holding capacity > 5000 g / sheet 4. Multiple time washable, at least 6 times over the lifespend of 24 month 5. Rigid structure must not collapse even soaked with water 100 % 6. Porous foam highly permeable with low initial and average pressure drop 7. High permeability for dust to settle around the pores walles and leaving the pores open 8. When loaded full with dust particles, media must ensure that air will always pass through (Van Der Wals Forces) 9. Fractional efficiency of 5 micron water droplets at 100 % 10. < 40 Pa at given air flow for design point GE Frame 5 11. Independent 3rd party certificate must be submitted 12. In - house data sheet 13. References in Indonesia must be submitted with track record and customer details in order to cross check 14. Besides removing water at 100 %, atmospheric residues must be removed as well, such as hydrocarbons from industrial process 15. Filter class G 4 according to En779 16. 2000 x 1174 x 50 mm as Z line cut