PRODUCT TECHNICAL DATASHEET
WATERPROOFING
SOPRAJOINT TPE Tse
THERMOPLASTIC RUBBER EXTERNAL WATERSTOP =
ee
DESCRIPTION aE
‘SOPRAJOINT TPE are SOPREMIA's specialty waterstops extruded from high quality [\iaia—aiaalias RM iael
ingredients differentiating it from other types of waterstops with high physical
abilities that allow the product to play the role of waterstop at construction joints
while welded to the bitumen membrane, SOPRAJOINT TPE comes in a transparent,
customized profile hence ease of instalation and quality assurance of adhesion to
the membrane. SOPRAJOINT TPE is used with SOPRAMA’s un-bonded
sub-structure waterproofing systems to form consistent compartments bonding to
structural concrete and allowing for limiting leak repairs and pre-injection works if
required. Due to its nature as a Thermoplastic Elastomer; SOPRAJOINT TPE is,
responsive to a wide range of temperature fluctuations thus has good elongation
and practically exhibits the advantages of resistance to deformation and original
size recovery
USER APPLICATIONS
= Under Construction Joints
in horizontal and vertical applications
= Compartment formation
in SOPREMA's COLPHENE CSW foundation Waterproofing systems.
= DEEP BASEMENTS
= WATER RETAINING STRUCTURES.
= TUNNELS
MITE)
240mm 4mm 20mm 30mm 45mm 90mm
SUSTAINABILITY, HEALTH & ENVIRONTMENT
Allour activities & growth target sustainable development to minimize the impact on the environment. SOPRAJOINT TPE does.
rot contain any subtances that might be detrimental to health or to environment and complies with generally accepted health
standards,
STORAGE & HANDLING
‘SOPRAJOINT TPE should be stored away from the source of ignition. Adequate ventilation must be secured. Sheets should be stacked
properly away from any source of damage or contamination.
QUALITY CONTROL,
SOPRAJOINT TPE membranes are manufactured in ISO-9001 certified SOPREMA factories which are audited by Third-Party
organizations. The system membranes are manufactured to meet SOPREMA's Quality Management Manual
Scenmah (@ [sori Poe anePRODUCT TECHNICAL DATASHEET
o)
SOPRAJOINT TPE Soe
THERMOPLASTIC RUBBER EXTERNAL WATER STOP EEE
[sn
Color Clear White (Transparent)
Hardness (Shore A) 1SO 868 89
Elongation at break (%) 180 527 > 100
Elastic modulus (MPa) 180 527 50