Date: 08/04/2022 Exp.9 IMPLEMENTATION OF GSM USING NETSIM TOOL
Aim: To do GSM implementation using NETSIM and to analyse the
data obtained. SOFTWARE REQUITRED: NETSIM
THEORY
GSM: The Global System for Mobile Communications (GSM) is a standard
developed by the European Telecommunications Standards Institute (ETSI) to describe the protocols for second-generation (2G) digital cellular networks used by mobile devices such as mobile phones and tablets. It was first deployed in Finland in December 1991.[2] By the mid-2010s, it became a global standard for mobile communications achieving over 90% market share, and operating in over 193 countries and territories.[3] 2G networks developed as a replacement for first generation (1G) analog cellular networks. The GSM standard originally described a digital, circuit-switched network optimized for full duplex voice telephony. This expanded over time to include data communications, first by circuit-switched transport, then by packet data transport via General Packet Radio Service (GPRS), and Enhanced Data Rates for GSM Evolution (EDGE). PROCEDURE Open GSM simulator in NETSIM NewWireless networksGSM Arrange the components required as in the network diagram. Add applicationInclude application link as per requirement(Assign source and destination)Change protocol to VBR, all functions to exponential. For mobiles in same link give same velocity, Before running enable and disable all the simulation factors. Disable TCP Run the simulation. NETWORK DIAGRAM Register No.19BEC1354 Name: Dhanvanth voona
OUTPUT
AVERAGE THROUGHPUT VS VELOCITY GRAPH
AVERAGE DELAY VS VELOCIY GRAPH
Register No.19BEC1354 Name: Dhanvanth voona
INFERENCE For GSM maximum delay and throughput was observed when velocity was 10m/s.