Professional Documents
Culture Documents
Abbreviations
[brackets] – repeat instruction within brackets as often as given after brackets or to the end of the round or row
(round brackets) – count of stitches done in this round or row
Number in front of an abbreviation – number of stitches to crochet
CH – chain Sc2tog – single crochet 2 together (1 stitch decreased)
SC – single crochet Hdc2tog – half double crochet 2 together (1 stitch
ST – stitch(es) decreased)
HDC – half double crochet Dc2tog – double crochet 2 together (1 stitch decreased)
DC – double crochet Rd – round/rounds
SLST – slip stitch
This pattern is the property of DioneDesign. All rights reserved. 1
General notes
Please read these instructions before working the pattern. If you find any mistake, please report it to
DioneDesign@email.cz.
Changing rounds
Do not replace crochet stiches by chain stiches at the beginning of each row. Instead make endless spiral. Crochet a first
stitch of the row in first stitch of previous round. Use a stitch marker to remember of the beginning of the round. How to
mark beginning of a row is demonstrated on pictures below.
Loose ends
At the beginning and the end of a piece leave a tail of at least 15 cm or even longer, because most of these can be used
for sewing. Loose ends you do not use anymore can be pulled through some stitches on the inside of the piece and cut
off.
2
Pattern
Head
Rd 1: Begin with red working in rounds. 6 SC in the magic
circle (6)
Rd 2: 2 SC in each ST (12)
Rd 3: [2 SC in first ST, 1 SC in next ST] 6x (18)
Rd 4: [2 ST in first ST, 1 SC in next 2 ST] 6x (24)
Rd 5: [2 ST in first ST, 1 SC in next 3 ST] 6x (30)
Rd 6: SC in each ST (30)
Rd 7-10: SC in each ST (30)
Rd 11: [SC in next 3 ST, 1 Sc2tog] 6x. (24)
Rd 12: [SC in next 2 ST, 1 Sc2tog] 6x. (18)
Now we place the eyes (I recommend to put them in the 4th
round) and we stuff the head
Rd 13: [SC in next ST, 1 Sc2tog] 6x. (12)
Rd 14: [Sc2tog] 6x (6)
Rd 15: [Sc2tog] 3x (3)
Body
Rd 1: Begin with blue working in rounds. 8 SC in the magic circle (8)
Rd 2: 2 SC in every ST (16)
Rd 3: [2 SC in first ST, 1 SC in next ST] 8x (24)
Rd 4: [2 ST in first ST, 1 SC in next 2 ST] 8x (32)
Rd 5: [2 ST in first ST, 1 SC in next 3 ST] 8x (40)
Rd 6: SC in every ST (40)
Rd 7-12: SC in every ST (40)
Rd 13: SC in next 9 ST, [Sc2tog, 1 SC in next 3 ST] 5x, 1 SC in
last 6 ST (35)
Rd 14: SC in every ST (35)
Rd 15: SC in next 6 ST, [Sc2tog, 1 SC in next 2 ST] 5x, 1 SC in
last 9 ST (30)
Rd 16: SC in every ST (30)
Rd 17: SC in next 3 ST, [Sc2tog, 1 SC in next ST] 5x, 1 SC in
last 12 ST (25)
Rd 18: SC in every ST (25)
Rd 19: SC in every ST (25)
Rd 20: SC in next 23 ST, Sc2tog (24)
Rd 21: [SC in next 6 ST, 1 Sc2tog] 3x. (21)
Rd 22-23: SC in every ST (21)
Interrupt your work insert a rattle into the body (Kinder Surprise Egg with beads) and stuff the body. Continue.
3
Rd 24: [SC in next 5 ST, 1 Sc2tog] 3x. (18)
Rd 25: [SC in next ST, 1 Sc2tog] 6x. (12)
Stuff the body again.
Rd 26: [Sc2tog] 6x (6)
Rd 27: [Sc2tog] 3x (3)
First leg
Rd 1: Begin with black working in rounds. 12 SC in the magic
circle (12)
Rd 2: Change colour. Continue with white. [2 SC in first ST, 1 SC
in next ST] 6x (18)
Rd 3: Change colour. Continue with black. [2 SC in first ST, 1 SC in
next 2 ST] 6x (24)
Rd 4: Change colour. Continue with white. [2 SC in first ST, 1 SC
in next 3 ST] 6x (30)
Rd 5: Change colour. Continue with yellow. Work in back loops
(see picture on right) SC in every ST (30)
Rd 6-8: SC in every ST (30)
Rd 9: [SC in next 3 ST, 1 Sc2tog] 6x. (24)
Rd 10: SC in every ST (24)
Rd 11: [SC in next 2 ST, 1 Sc2tog] 6x. (18)
Rd 12: [SC in next ST, 1 Sc2tog] 6x. (12)
Interrupt your work and stuff the leg.
Rd 13: [Sc2tog] 6x (6)
Rd 14: [Sc2tog] 3x (3)
Second leg
Rd 1: Begin with black working in rounds. 12 SC in the magic circle (12)
Rd 2: Change colour. Continue with white. [2 SC in first ST, 1 SC in next ST] 6x (18)
Rd 3: Change colour. Continue with black. [2 SC in first ST, 1 SC in next 2 ST] 6x (24)
Rd 4: Change colour. Continue with white. [2 SC in first ST, 1 SC in next 3 ST] 6x (30)
Rd 5: Change colour. Continue with orange. Work in back loops (see picture on right) SC in every ST (30)
Rd 6-8: SC in every ST (30)
Rd 9: [SC in next 3 ST, 1 Sc2tog] 6x. (24)
Rd 10: SC in every ST (24)
Rd 11: [SC in next 2 ST, 1 Sc2tog] 6x. (18)
Rd 12: [SC in next ST, 1 Sc2tog] 6x. (12)
Interrupt your work and stuff the leg.
Rd 13: [Sc2tog] 6x (6)
Rd 14: [Sc2tog] 3x (3)
4
Third leg
Rd 1: Begin with white working in rounds. 12 SC in the magic circle (12)
Rd 2: Change colour. Continue with black. [2 SC in first ST, 1 SC in next ST] 6x (18)
Rd 3: Change colour. Continue with white. [2 SC in first ST, 1 SC in next 2 ST] 6x (24)
Rd 4: Change colour. Continue with black. [2 SC in first ST, 1 SC in next 3 ST] 6x (30)
Rd 5: Change colour. Continue with yellow. Work in back loops (see picture on right) SC in every ST (30)
Rd 6-8: SC in every ST (30)
Rd 9: [SC in next 3 ST, 1 Sc2tog] 6x. (24)
Rd 10: SC in every ST (24)
Rd 11: [SC in next 2 ST, 1 Sc2tog] 6x. (18)
Rd 12: [SC in next ST, 1 Sc2tog] 6x. (12)
Interrupt your work and stuff the leg.
Rd 13: [Sc2tog] 6x (6)
Rd 14: [Sc2tog] 3x (3)
Fourth leg
Rd 1: Begin with white working in rounds. 12 SC in the magic circle (12)
Rd 2: Change colour. Continue with black. [2 SC in first ST, 1 SC in next ST] 6x (18)
Rd 3: Change colour. Continue with white. [2 SC in first ST, 1 SC in next 2 ST] 6x (24)
Rd 4: Change colour. Continue with black. [2 SC in first ST, 1 SC in next 3 ST] 6x (30)
Rd 5: Change colour. Continue with orange. Work in back loops (see picture on right) SC in every ST (30)
Rd 6-8: SC in every ST (30)
Rd 9: [SC in next 3 ST, 1 Sc2tog] 6x. (24)
Rd 10: SC in every ST (24)
Rd 11: [SC in next 2 ST, 1 Sc2tog] 6x. (18)
Rd 12: [SC in next ST, 1 Sc2tog] 6x. (12)
Interrupt your work and stuff the leg.
Rd 13: [Sc2tog] 6x (6)
Rd 14: [Sc2tog] 3x (3)
Crochet 24 chains, then crochet 1 HDC in third chain from hook and continue 1 HDC in every CH.(22)
Hair
For the hair we needto prepare a bobblefrom yellow yarn. How to create a bobble can you find on page 8.
Sewing
Now we have all the parts we need to complete the bunny and we can start sewing.
1. First sew the cord and legs together. Two legs on one cord (on both ends).
2. Sew the head and the body together.
3. Then sew the Legs on the body.
4. Sew the wings on the body.
5. Sew the cord for hanging on the body. At the end sew the „C“ hook or clip.
6. Sew the hair on the head.
Notice:
You do not have permission to recopy, rewrite, redistribute or resell this pattern in any form as
your own or otherwise.
6
7
8