Professional Documents
Culture Documents
Thank you for purchasing Trick Flow Specialties’ Main Girdle for the BBF 429/460. These main girdles are
made in the USA and are designed to strengthen Ford's factory 2-bolt main cap assemblies. They are made
from tool steel, finished with black oxide, and come with main cap bolts and a provision for an oil pump pickup
tube hold-down. The race girdle features thicker construction for extra strength and includes main studs instead
of bolts.
Parts list:
(1) Trick Flow Main Girdle
(10) Main Bolts
(10) Washers
(1) ¼”-20 bolt (for securing the oil pump pick-up tube if needed)
(1) ¼” lock washer
Rear sump applications will require modifications to the oil pump pick-up. Front sump applications are
more of a direct bolt-on, but may require modifications depending on the particular parts combination.
Due to the spacer bushings that are preinstalled into the girdle, there is no need to machine down the tops of
the main caps.
Test fit the girdle to determine what modifications will be needed to fit your oil pump, pan and pick up
assembly. Do a separate test-fit to determine proper fit with the rotating assembly-especially on stroker
motors.
For final assembly, make sure the threads in the block are clean, then apply either 30-wt oil or moly lube to
the bolt threads and the washers. Install the main bolts and washers and torque them in at least three evenly
spaced steps.
PROPOSITION 65 WARNING
This product may contain one or more substances or chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.