You are on page 1of 1

Blue Heaven Vidyalaya OS02 2.

2
Experiment No.- 1 Dated:
Aih: To measure internal diameter and depth of a given calorimeter using vernier callipers and hence find its volume.
Apparatus: A vernier callipers and a calorimeter
Diagram:

uulahuduh.dudauuduehilukadul lul stip

Vernier Callepers
Formula used:
Diameter of calorimeter (D) M.S. =
reading+V.S. reading Xc.m.+ concide number
Volume of calorimeter is given by:
=
of vernier scale X least count
V= Where D= internal diameter
,
of calorimeter, L= depth of calorimeter
Observations:
Vernier Constant = =0.01 cm
N 10
Forinternaldiameter:
S.No. Main Scale Vernier scale Vernier scale Observed Mean internal
reading concide no. reading no. internal diameter (cm)
x(cm) n Y=n Xv.c. (cm)| diameter
D=X+Y
1. (a) 47 .06
7
(b) 4:7 47S
2. (a) 4:7 14
6 47
For depth :

S.No. Main Scale réading Vernier scale V.S. reading Observed


x (cm) concide Y= nxV.C.
Meandepth (1)
depth (cm)
number cm L= X+Y
(n) cm

7:2 2 O 02 2
7.2 O03 7:23
7:2
7.2
O 0 3 7. 23
7.oy

Calculations:
Mean diameter (D) 4.75cm
Mean depth (L) 7. 23 C 3-14 3.14 x87X7.23 _ 123-0Sem
Internal volume of calorimeter, V =

Result ha mTevnal dis mmati nmd dobk f wen


Ca immotin nsig Vormen Capers fom 4.7S e an
:23 C and homc a vitamu ' is aud ,
128. Ss cne.

Precautions: () Avoid excessive undue pressure on the joints of the vernier callipers.
or
(ii) The mention of the vernier scale on the main scale should be made smooth by oilingit.
(ii) Observations should be taken in mutually per
pendicular directions
(iv) While measuring depth the strip n should be touch the
button surface normally

You might also like