Professional Documents
Culture Documents
Integrants:
Luciana Ayala
Luciana castro
Jesus Molina
Jose santos Vasquez
Good Afternoon, today we are going to
introduce our experiment named: The water
For this we are going to need: pump
●
Direct current motor.
●
9v Battery
●
Caps
●
Glue or silicone
●
CautÍn
●
Terminal board
●
Switch
●
Hose
●
Water
PROCESS
●
1. Cut out a cap and glue it to the wooden base.
●
2. Then make a small hole in another slot and put the dc motor on top of it and put the other slot
that we cut out.
●
3. Then we make a hole for another cap and we glue a tube and then we glue the part that was
made with this
●
4. Then, between the two caps, we make a hole where another tube that was cut a little bit, we glue
it
●
5. Then on a wooden board we paste what we did.
●
6. Then we connect the cables from the terminal to the DC motor, then with the switch we connect
the other cables and then we connect the terminal to the 9v battery and glue them to the board.
●
7. Then we pour water into a cup and with a syringe through the other tube in the middle we pour
water but first we turn on the experiment and that's it, thank you very much.
Conclusion
●
My question in this experiment was what a water pump was for and the
conclusion was that it could be used to irrigate the fields, collect water from a
well, empty the basement, ETC...
End
●
Thank you very much and happy rest of the day this is the
presentation of the water pump.