Professional Documents
Culture Documents
Air in
Wolter Fans.
Motion.
M08.HRE(TH) #
Technical
Table of Content
Description
Contents
Page 1
Technical description
Page 2
General information
Page 2
Fan casings
Page 2
Impellers
Page 2
Shaped inlets
Page 2
Shafts
Page 2
Bearings
Page 2
Sound levels
Page 3
Performance curves
Page 3
Performance curves
Page 6
Dimensions
Page 23
Technical Informations
Page 29
M08.HRE(TH) V2018/October 1
Technical Description
General information
This range of Wolter fans is the result of many years of research and development. The efficiency of all the fans is guaranteed through specific volume
figures at maximum pressure differentials. Excellent performance and minimal noise levels are the features of this new fan range.
These centrifugal fans are designed for the conveyance of clean air and non-aggressive steam and gases at a temperature range from -30°C to +80°C
(22°F to 176°F). For smoke exhaust & air relief system operations, the fans are also certified for higher temperatures of up to 600˚C for up to 4 hours in
accordance to EN 12101-3:2015
Type: HRE (SISW backward curved).
Computer design allows for interchange-ability of components which ultimately provides an economy product.
Component dimensions are in accordance with DIN 323 section R 20 which means that the nominal size corresponds with the outside diameter of the
impeller.
Fan casings
The machine folded scroll is made of galvanized sheet steel as standard. Predrilled holes are located in the side plates to fix mounting frames. It provides
for easy installation. The outlet flanges are in accordance with international standards DIN 24193 sheet 2. Stainless steel or epoxy painted mild steel
material as options.
Versions of casing
High performance centrifugal fan with folded galvanized scroll as standard or stainless steel / epoxy painted mild steel material as options:
03 315 ... 450 with standard outlet flange and removable feet
04 315 ... 630 without outlet flange, with galvanized rectangular frame
05 315 ... 630 with standard outlet flange, with galvanized rectangular frame
06 710 ... 2000 without outlet flange, with welded rectangular frame
07 710 ... 2000 with standard outlet flange with welded rectangular frame
Impellers
The torsion-resistant impellers guarantee a high standard of technology regarding volume flows and processing. The impellers with the shaft are statically
and dynamically balanced on precision machines according to quality standard Q 2.5 of VDI 2060, AMCA 204 & ISO 14694. The backward curved
impellers of the HRE range are made of steel with powder coated or galvanized/stainless steel as option. All impeller series guarantee highest peripheral
speed. The aero dynamical design stands for the precision of these modern high efficiency impellers. For chemical resistance applications, both fan
casing and impeller can be finished with special epoxy protection coating or fully manufactured in GRP (FRP) material.
Shaped inlets
The aerodynamically shaped inlets are bolted in and guarantee a perfect inlet stream onto the impeller.
lnlets for the type HRE are made of steel with powder coated or stainless steel/epoxy painted mild steel material as options.
Shafts
All precision shafts are trued and have a smooth finish. Both shaft ends have as a standard feature diameters complying with DIN 748, sheet 1 and a
groove (DIN 6885, sheet 1) with locking spring. A wax coating provides protection against corrosion of this precision engineered shaft.
Bearings
The low noise precision ball bearings are designed for a theoretical life of at least 40.000 working hours. Limiting values for speed and power are indi-
cated on the characteristic curves and should not be exceeded. Long term quality is safeguarded when general assembly and service guidelines for
V-belt drives are adhered to.
2 M08.HRE(TH) V2018/October
Technical Description
Impeller size
315 ... 2000
Casing version
00 ... 07
Numbers of inlet
E = single inlet
Radial fan
Impeller type
H = Backward curved blade
Sound levels
In order to make possible an assessment of sound projection adequate to the human ear the A-assessed description of sound levels has been chosen.
The ascertaining of the sound power level follows the reverberant room method according to AMCA 300.
The sound power levels shown on each performance curve, LwiA, refer to the overall sound power “A-Weighted” levels. The computed sound power
levels were converted into A-Weighted levels using adjustments to the octave band spectrum as follows:
The overall sound pressure levels, LpiA, can be calculated from the overall sound power levels as follows:
1) Free Field Conditions: LpiA = LwiA - (20 log10 d) -11
2) Room Conditions: LpiA = LwiA - (20 log10 d) -7
Where: d = distance from fan in meters.
Performance curves
The performance curves have been established using the outlet test method in the test chamber according to AMCA 210 installation B (free inlet, ducted
outlet).
The curves indicate as a function of the volume flow:
• the total pressure increase ∆ptot. for constant speed(heave black lines)
• constant lines of shaft power PW (red Lines)
• constant lines of sound power level LwiA (blue lines)
All values relate to an air density:
ρ1 = 1,2 kg/m³ at 20°C
The dynamic pressure pd2 and the flow speed c2 respectively stated in the diagrams refer to the flange cross section of the outlet connection pieces.
Motor power
The powers (Pw) provided on the performance curve are the internal powers required by the ventilator and do not include the mechanical losses. To
compute the total required shaft input power, the internal power must be divided by the machanical efficiency:
where: Ps = total required shaft input power
Ps = Pw / ηm ηm = mechanical efficiency
M08.HRE(TH) V2018/October 3
Technical Description Nozzles
est Setups
Test Fan Auxilliary Fan
Test Setups
The performance curves provided in this catalogue were measured according to AMCA 210 (ISO 5801) in a test chamber.
Nozzles
The sketch below shows the principle set up of the test chamber.
Test Fan
Test Fan Auxilliary Fan
Settling
means
4 M08.HRE(TH) V2018/October
AMCAPerformance
- FEG rating
Curve Grade: HRE
Fan Efficiency #
Certified FEGs are determined in accordance with AMCA 205-12 Energy Efficiency Classification
for fans. In conjunction with AMCA 211-13 (Rev. 2015) Certified Ratings Program, Product Rating
Manual for Fan Air Performance. This classification is based on fan peak (optimum) total efficiency
for a given fan speed, fan size and application category. For the purpose of energy classification, the
peak efficiency can be determined at a speed not higher than the maximum design speed of the fan.
The AMCA Certified Ratings Seal applies to the Fan Efficiency Grade (FEG) for HRE series Centrifugal
Fan model HRE 315 to HRE 2000 as shown in the table below.
Fan Model Max. Fan Fan Outlet Fan Efficiency Fan Model Max. Fan Fan Outlet Fan Efficiency
Speed Area Grade Speed Area Grade
No. (rpm) (m2) (FEG) No. (rpm) (m2) (FEG)
90
FEG90
FEG85
80
FEG80
FEG75
Fan Peak Total Efficiency (%)
70
FEG71
FEG67
FEG63
60
FEG60
FEG56
FEG53
50 FEG50
40
30
Fan sizes in preferred numbers
125160 200 250 315 355 400 450 500 560 630 710 800 900 1000
20
0 100 200 300 400 500 600 700 800 900 1000 1100
Fan size (mm)
M08.HRE(TH) V2018/October 5
Notes:
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 315 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
300 500 1000 2000 3000 V [C.F.M .]
%
66
2.5 kW To 10
%
= R (Basic Model)
ta
71
2 kW p l Ef 9
= K (Enhanced Model) fi c
2000 3.2 kW i en 8
%
66
= Do not use in this area 1.6 kW cy
n 7
1.25 kW
6
%
m
60
∆pt[Pa] 1 kW
5
0.8 kW
k
1000 0.6 kW 4
er
900 j
0.5 kW
ow
%
800
43
rP
0.4 kW 3
ne
700 h
In
0.32 kW
600
0.25 kW g
500 2
%
29
0.2 kW
400 0.16 kW f
∆pt
0.125 kW
e [in.WG]
300 0.1 kW
%
80 W d 1
17
4000 1/mi n0.9
60 W c
200 0.8
50 W
3550 1/mi n 0.7
b
40 W
0.6
32 W 3150 1/mi n
a
0.5
2800 1/mi n
Sound Power Level
100 0.4
LwiA dB( A)
90 2500 1/mi n
80
0.3
70 2250 1/mi n
60
2000 1/mi n
Unlined
50 Plastic 0.2
SWL Metal
Outlet
dB(A) Outlet 1800 1/mi n
Duct
Duct *
40
a 69 56
b 72 59 1600 1/mi n
c 75 62
30
d 78 65
1400 1/mi n
e 81 68
0.1
f 84 71
1250 1/mi n 0.09
g 87 74
20 h 90 77 0.08
j 93 80 1120 1/mi n 0.07
k 96 83
m 99 86 0.06
1000 1/mi n
n 102 89
p 105 92 0.05
q - - 900 1/mi n
10 0.04
·
500 1000 2000 3000 5000 V m3/h
·
0.2 0.3 0.5 1 2 V m3/s
2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
6 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 355 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
300 500 1000 2000 3000 5000 V [C.F.M .]
%
= R (Basic Model)
64
%
3.2 kW To
69
3000 = K (Enhanced Model) 4 kW ta l
%
Ef
73
= Do not use in this area 2.5 kW n fi c
ien 10
cy 9
2 kW
%
68
2000 m 8
1.6 kW
∆pt[Pa] 7
1.25 kW
k p
6
%
58
1 kW
er
ow
0.8 kW j 5
rP
ne
q
In
1000 0.6 kW h 4
%
44
900 0.5 kW
800 g
0.4 kW 3
700
0.32 kW
%
f
35
600
0.25 kW 3800 1/mi n
0.16 kW ∆pt
400 3150 1/mi n [in.WG ]
d
0.125 kW
Unlined
Plastic 1600 1/mi n
100 SWL Metal 0.4
Outlet
dB(A) Outlet
90 Duct
Duct *
80 a 66 61 1400 1/mi n
b 69 64 0.3
70
c 72 67
d 75 70 1250 1/mi n
60
e 78 73
f 81 76
50 1120 1/mi n 0.2
g 84 79
h 87 82
40 j 90 85 1000 1/mi n
k 93 88
m 96 91
n 99 94 900 1/mi n
30
p 102 97
q 105 100
0.1
·
500 1000 2000 3000 5000 V m3/h
·
0.2 0.3 0.5 1 2 V m3/s
2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 7
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 400 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
500 1000 2000 3000 5000 V [C.F.M .]
%
3000 = R (Basic Model) To
64
%
4 kW ta
l
69
= K (Enhanced Model) 3.2 kW Ef
p fi c
%
i en
73
= Do not use in this area 2.5 kW cy
2000
2 kW n
%
∆pt[Pa] 10
68
1.6 kW m 9
8
1.25 kW q
%
k 7
58
1 kW
er
6
ow
j
rP
0.8 kW
1000
ne
5
In
900
%
0.6 kW h
44
800 4
0.5 kW
700
0.4 kW g
600 3
%
0.32 kW
35
500 f 3200 1/mi n
0.25 kW
400 0.2 kW 2
e 2800 1/mi n
0.16 kW ∆pt
d [in.WG]
2500 1/mi n
300 0.125 kW
80 W
1
200 b 2000 1/mi n
0.9
60 W
0.8
50 W a 1800 1/mi n
0.7
2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
8 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 450 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
500 1000 2000 3000 5000 V [C.F.M.]
= R (Basic Model) To
ta
3000 lE
%
= K (Enhanced Model) ffic
64
%
ien
69
= Do not use in this area 4 kW 5 kW cy 10
%
p
73
3.2 kW 9
2000 n 8
2.5 kW
%
∆pt[Pa] 7
68
2 kW
m 6
1.6 kW q
%
er
k 5
58
ow
1.25 kW
rP
ne
1000 1 kW 4
j
In
900 0.8 kW
%
45
800
h 3
0.6 kW
700
0.5 kW ∆pt
600 g
[in.WG]
%
0.4 kW
35
500 2
2800 1/min
0.32 kW f
·
1000 2000 3000 5000 10000 V m3/h
·
0.2 0.3 0.5 1 2 3 V m3/s
2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 9
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 500 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
300 500 1000 2000 3000 5000 10000 V [C.F.M .]
%
%
To
%
52
38
6 kW ta
68
= K (Enhanced Model) 8 kW
q l
%
5 kW 10 kW Ef
79
3000 = Z (Heavy Model) fi c
4 kW p
i en
cy
= Do not use in this area 3.2 kW 10
n 9
2000 2.5 kW 8
m
%
r
67
2 kW 7
∆pt[Pa]
1.6 kW k 6
1.25 kW
r
5
we
%
Po
1 kW
52
1000 h 4
er
0.8 kW
I nn
900
800 0.6 kW g
3
700 0.5 kW
f ∆pt
600 0.4 kW
e
[in.WG]
0.32 kW
500 2
0.25 kW d
%
25
400
0.2 kW
c 2800 1/mi n
0.16 kW
300 2500 1/mi n
0.125 kW b
1
0.1 kW 2250 1/mi n
0.9
80 W a
200 0.8
2000 1/mi n
0.7
Sound Power Level 1800 1/mi n 0.6
LwiA dB( A)
0.5
1600 1/mi n
100 0.4
90 1400 1/mi n
80
Unlined 0.3
Plastic 1250 1/mi n
70 SWL Metal
Outlet
dB(A) Outlet
Unlined
60 Duct
Plastic
SWL Duct
Metal* 1120 1/mi n
a Outlet
60 57
dB(A) Outlet
50 Duct 0.2
b 63 Duct
60 * 1000 1/mi n
c
a 66 63
40 d
b 69 66 900 1/mi n
e
c 72 69
df 75 72
30 800 1/mi n
ge 78 75
hf 81 78 0.1
gj 84 81 710 1/mi n 0.09
k
h 87 84
20 0.08
m j 90 87 630 1/mi n
n
k 93 90 0.07
p
m 96 93 0.06
qn 99 96
pr 102 99 0.05
qs - -
10 0.04
•
500 1000 2000 3000 5000 10000 20000 V m3/h
•
0.2 0.3 0.5 1 2 3 5 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
10 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 560 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
500 1000 2000 3000 5000 10000 V [C.F.M .]
5000 20
= R (Basic Model)
%
To
%
4000
52
ta
38
8 kW 10q kW
68
= K (Enhanced Model) 12.5 kW l Ef
%
fi c
79
= Z (Heavy Model) 6 kW i en
3000 r
5 kW p cy
= Do not use in this area
4 kW 10
n 9
3.2 kW
%
2000 8
67
2.5 kW m 7
∆pt[Pa] s
2 kW 6
k
r
we
1.6 kW
5
%
Po
52
1.25 kW
er
1000 4
I nn
1 kW h
900
800 0.8 kW
g 3
700 0.6 kW
600 0.5 kW f
0.4 kW
500 e 2
%
0.32 kW
25
400 d 2600 1/min
0.25 kW
0.2 kW ∆pt
300 c 2250 1/min [in.WG]
0.16 kW
b 1
0.125 kW 2000 1/min 0.9
200 0.1 kW 0.8
a
1800 1/min
0.7
Sound Power Level 1600 1/min 0.6
LwiA dB(A)
0.5
1400 1/min
100 0.4
90 1250 1/min
80 Unlined
Plastic 0.3
70 SWL Metal 1120 1/min
Outlet
dB(A) Outlet
Unlined
Duct
Plastic
60 SWL Duct
Metal*
Outlet 1000 1/min
a
dB(A) 59 56
Outlet
50 Duct 0.2
b 62 Duct
59 *
900 1/min
c
a 65 62
40 d
b 68 65
e
c 71 68 800 1/min
df 74 71
30 ge 77 74 710 1/min
hf 80 77
0.1
gj 83 80 630 1/min 0.09
k
h 86 83
20 0.08
m j 89 86
560 1/min 0.07
n
k 92 89
p
m 95 92 0.06
qn 98 95
pr 101 98 0.05
qs 104 101
10 0.04
·
1000 2000 3000 5000 10000 20000 30000 V m3/h
·
0.2 0.3 0.5 1 2 3 5 V m3/s
1 2 3 5 10 20 30 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 11
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 630 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
500 1000 2000 3000 5000 10000 20000 V [C.F.M .]
%
%
%
q ta
52
38
= K (Enhanced Model) 10 kW
68
8 kW 12.5 kW l Ef
%
fi c
79
3000 = Z (Heavy Model) i en
6 kW p 16 kW cy
= Do not use in this area 5 kW 10
9
4 kW n r
2000 8
%
3.2 kW 7
67
m
∆pt[Pa] 2.5 kW 6
2 kW k
r
5
we
1.6 kW
Po
%
j s
52
1000 4
er
1.25 kW
I nn
900 h
800 1 kW
g 3
700 0.8 kW
600 f
∆pt
0.6 kW
[in.WG]
500 0.5 kW 2
e
0.4 kW
%
400
25
0.32 kW d
2200 1/min
0.25 kW c
300 2000 1/min
0.2 kW
b
0.16 kW 1
1800 1/min
a 0.9
200 0.125 kW 0.8
1600 1/min
0.7
Sound Power Level 0.6
1400 1/min
LwiA dB( A)
0.5
1250 1/min
100 0.4
90 1120 1/min
80
Unlined 0.3
Plastic 1000 1/min
70 SWL Metal
Outlet
dB(A) Outlet
Unlined
60 Duct
Plastic 900 1/min
SWL Duct
Metal*
a Outlet
59 55
dB(A) Outlet
50 Duct 0.2
b 62 Duct
58 * 800 1/min
c
a 65 61
40 d
b 68 64
710 1/min
e
c 71 67
df 74 70
30 630 1/min
ge 77 73
hf 80 76 0.1
gj 83 79 560 1/min 0.09
k
h 86 82
20 0.08
m j 89 85 500 1/min
n
k 92 88 0.07
p
m 95 91 0.06
qn 98 94
pr 101 97 0.05
qs 104 100
10 0.04
·
1000 2000 3000 5000 10000 20000 30000 V m3/h
·
0.2 0.3 0.5 1 2 3 5 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
12 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 710 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
1000 2000 3000 5000 10000 20000 V [C.F.M .]
= R (Basic Model) To
4000 ta
l
%
Ef
%
= K (Enhanced Model)
50
fi c
60
%
16 kW
12.5 kW i en
68
20 kW
%
= Z (Heavy Model) q cy
77
3000 10 kW
= Do not use in this area
∆pt[Pa] p
8 kW 10
%
9
72
6 kW n
2000 8
5 kW r
m 7
4 kW
r
%
we
59
Po
3.2 kW k
er
5
I nn
2.5 kW
j
1000 2 kW 4
%
900
42
1.6 kW h
2000 1/mi n
800
1.25 kW 3
700 g
1800 1/mi n
1 kW
600
0.8 kW f
1600 1/mi n
500 2
0.6 kW e ∆pt
400 0.5 kW 1400 1/mi n [in.WG]
d
0.4 kW
1250 1/mi n
300 0.32 kW c
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 13
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 800 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
1000 2000 3000 5000 10000 20000 V [C.F.M .]
To
= K (Enhanced Model) ta
l
%
Ef
%
3000
50
12.5 kW fi c
60
%
= Z (Heavy Model) 16 kW i en
68
%
10 kW 20 kW cy
77
= Do not use in this area q 10
8 kW 9
2000 p 8
%
6 kW
72
7
5 kW n
∆pt[Pa] r 6
r
4 kW
we
m
Po
%
3.2 kW
59
er
k
I nn
1000 2.5 kW 4
900 2 kW j
800
%
1.6 kW 3
42
700 h 1600 1/mi n
1.25 kW
600
1 kW g
500 1400 1/mi n 2
0.8 kW
f
400 1250 1/mi n ∆pt
0.6 kW
[in.WG]
0.5 kW e
1120 1/mi n
300 0.4 kW
d
0.32 kW 1000 1/mi n
1
c
0.25 kW 0.9
900 1/mi n
200 0.8
0.2 kW b
0.7
0.16 kW 800 1/mi n
a 0.6
710 1/mi n
0.5
Unlined
Plastic
SWL
Outlet
Metal
Unlined Sound Power Level
dB(A) Plastic Outlet 630 1/mi n
100 SWL Duct
Outlet
Metal LwiA dB(A) 0.4
dB(A) Duct
Outlet*
90 Duct
a 59 Duct
55 *
80 ba 62 58 560 1/mi n
bc 65 61 0.3
70 dc 68 64
500 1/mi n
de 71 67
60
ef 74 70
gf 77 73 450 1/mi n
50 gh 80 76 0.2
hj 83 79
kj 86 82 400 1/mi n
40
mk 89 85
mn 92 88
pn 95 91
355 1/mi n
30 p
q 98 94
qr 101 97
0.1
·
2000 3000 5000 10000 20000 30000 V m3/h
·
0.5 1 2 3 5 10 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
14 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 900 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
1000 2000 3000 5000 10000 20000 30000 V [C.F.M .]
3000 To
%
= K (Enhanced Model) ta
50
60
16 kW
%
l Ef
68
20 kW
q fi c
%
= Z (Heavy Model) 12.5 kW 10
i en
77
25 kW cy 9
= Do not use in this area 10 kW p
2000 8
8 kW
%
n 7
72
6 kW
6
∆pt[Pa] 5 kW m
r
r
5
we
4 kW
%
Po
59
er
1000 3.2 kW 4
I nn
900 2.5 kW j
800
2 kW 3
%
700 h
42
1.6 kW 1400 1/mi n
600
g
1.25 kW
500 1250 1/mi n 2
1 kW
f
400 0.8 kW 1120 1/mi n
∆pt
e
0.6 kW
[in.WG]
1000 1/mi n
300 0.5 kW d
630 1/mi n
0.5
Unlined
Plastic
SWL
Outlet
Metal
Unlined Sound Power Level 560 1/mi n
100 dB(A) Plastic Outlet 0.4
SWL Duct
Outlet
Metal LwiA dB(A)
90 dB(A) Duct
Outlet*
Duct
a 60 Duct
56 *
80 500 1/mi n
ba 63 59
0.3
bc 66 62
70
dc 69 65 450 1/mi n
60 de 72 68
ef 75 71
gf 78 74 400 1/mi n
50 0.2
gh 81 77
hj 84 80
40 kj 87 83 355 1/mi n
mk 90 86
mn 93 89
pn 96 92
315 1/mi n
30
p
q 99 95
qr 102 98
0.1
·
2000 3000 5000 10000 20000 30000 50000 V m3/h
·
0.5 1 2 3 5 10 V m3/s
1 2 3 10 0 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 15
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 1000 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
2000 3000 5000 10000 20000 30000 50000V [C.F.M .]
To
4000 = K (Enhanced Model) ta
l Ef
%
= Z (Heavy Model) fi c
50
25 kW
60
i en
%
32 kW
68
cy
%
q 40 kW
77
3000 = Do not use in this area 20 kW
16 kW p
10
%
∆pt[Pa] 12.5 kW 9
72
n
2000 8
10 kW
7
r
m
we
r
8 kW
Po
%
er
59
k
6 kW
I nn
5
5 kW
j
1000 4 kW 4
%
900 3.2 kW h
42
800 1400 1/mi n
2.5 kW 3
700 g
2 kW 1250 1/mi n
600
1.6 kW f
500 1120 1/mi n 2
1.25 kW
e
∆pt
400 1 kW 1000 1/mi n
[in.WG]
d
0.8 kW
900 1/mi n
300 0.6 kW c
0.5 kW 800 1/mi n
1
b
0.4 kW 0.9
200 710 1/mi n 0.8
0.32 kW a
0.7
630 1/mi n
0.6
Unlined
Plastic Sound Power Level
SWL Metal
Unlined 560 1/mi n
Outlet
Plastic 0.5
dB(A)
SWL Duct
Outlet
Metal LwiA dB( A)
Outlet Duct
dB(A) Outlet*
Duct
a 63 Duct
60 * 500 1/mi n
100 0.4
ba 66 63
90
bc 69 66
80 dc 72 69
450 1/mi n
de 75 72 0.3
70
ef 78 75 400 1/mi n
60 gf 81 78
gh 84 81
hj 87 84 355 1/mi n
50 0.2
kj 90 87
mk 93 90
40 mn 96 93 315 1/mi n
pn 99 96
p
q 102 99
30 qr 105 102
·
3000 5000 10000 20000 30000 50000 V m3/h
·
1 2 3 5 10 20 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
16 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 1120 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
2000 3000 5000 10000 20000 30000 50000 V [C.F.M .]
5000 20
= K (Enhanced Model)
To
4000 ta
%
= Z (Heavy Model) l
50
Ef
60
%
40 kW
32 kW fi c
68
50 kW
%
= Do not use in this area q ien
77
cy
3000 25 kW
20 kW p
10
%
∆pt[Pa]
72
16 kW 9
n r
2000 8
12.5 kW
r
we
7
Po
10 kW m
%
er
59
6
I nn
8 kW
k
5
6 kW
5 kW j
1000 4
%
42
900 4 kW
h 1300 1/mi n
800
3.2 kW 3
700 g
2.5 kW 1120 1/mi n
600
2 kW
f
500 1000 1/mi n 2
1.6 kW
∆pt
e
400 1.25 kW 900 1/mi n [in.WG]
1 kW d
800 1/mi n
300 0.8 kW
c
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 17
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 1250 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
3000 5000 10000 20000 30000 50000 V [C.F.M .]
5000 20
To
= K (Enhanced Model) ta
l Ef
%
4000 fi c
50
60
50 kW
%
= Z (Heavy Model) 60 kW i en
68
q
%
40 kW cy
77
= Do not use in this area 80 kW
p
3000 32 kW
25 kW n
%
10
72
∆pt[Pa]
20 kW 9
2000 m 8
r
16 kW
we
Po
%
12.5 kW k r
er
59
I nn
6
10 kW
j 5
8 kW
%
1000 6 kW 4
42
900 5 kW 1200 1/mi n
g
800 1120 1/mi n
4 kW 3
700
3.2 kW ∆pt
f 1000 1/mi n
600 [in.WG]
2.5 kW
e 900 1/mi n
500 2 kW 2
1.6 kW d
400 800 1/mi n
1.25 kW
c
710 1/mi n
300 1 kW
b
0.8 kW
630 1/mi n 1
a 0.9
0.6 kW
200 560 1/mi n 0.8
0.7
Unlined
SWL
Plastic
Metal
Unlined
Sound Power Level 500 1/mi n
Outlet
Plastic LwiA dB(A) 0.6
dB(A)
SWL Outlet
Metal
Duct
Outlet
dB(A) Duct
Outlet*
Duct 450 1/mi n
a 66 Duct
63 * 0.5
ba 69 66
bc 72 69
100 dc 75 72 400 1/mi n 0.4
90 de 78 75
80 ef 81 78
355 1/mi n
gf 84 81 0.3
70 gh 87 84
hj 90 87 315 1/mi n
60 kj 93 90
mk 96 93
50 mn 99 96 280 1/mi n 0.2
pn 102 99
p
q 105 102
40
qr 108 105
·
5000 10000 20000 30000 50000 100000 V m3/h
·
2 3 5 10 20 30 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
18 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 1400 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
3000 5000 10000 20000 30000 50000 V [C.F.M .]
To
4000 = K (Enhanced Model) ta
l Ef
%
fi c
%
= Z (Heavy Model)
50
i en
60
%
50 kW q 60 kW cy
68
%
= Do not use in this area 40 kW
77
3000
80 kW
32 kW p
10
∆pt[Pa]
25 kW 9
%
n
72
2000 20 kW 8
r
7
we
16 kW m
Po
6
er
%
12.5 kW r
59
I nn
k
10 kW 5
8 kW j
1000 4
900
%
6 kW h
42
800 1000 1/mi n
5 kW 3
700 g
4 kW ∆pt
900 1/mi n
600 [in.WG ]
3.2 kW
f
500 800 1/mi n 2
2.5 kW
e
2 kW
400 710 1/mi n
1.6 kW d
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 19
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 1600 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
5000 10000 20000 30000 50000 100000 V [C.F.M .]
To
4000 = K (Enhanced Model) ta
l
%
Ef
%
50
fi c
60
%
= Z (Heavy Model) i en
68
q80 kW
%
60 kW cy
77
3000 = Do not use in this area 50 kW
p 100 kW
40 kW 10
∆pt[Pa]
%
9
72
32 kW n
2000 8
25 kW
r
m 7
we
20 kW
Po
%
6
59
er
16 kW k
I nn
5
12.5 kW
j
1000 10 kW 4
%
42
900 8 kW h
900 1/mi n
800
6 kW 3
700 g
5 kW 800 1/mi n ∆pt
600 [in.WG ]
4 kW f
710 1/mi n
500 2
3.2 kW
e
400 2.5 kW 630 1/mi n
d
2 kW
560 1/mi n
300 1.6 kW
c
1.25 kW 500 1/mi n 1
b
1 kW 0.9
450 1/mi n
200 0.8
0.8 kW a
0.7
400 1/mi n
Unlined 0.6
Plastic
SWL Metal
Unlined Sound Power Level
Outlet
Plastic 355 1/mi n
dB(A)
SWL Outlet
Metal
Duct
Outlet LwiA dB(A) 0.5
dB(A) Duct
Outlet*
Duct
a 65 Duct
62 *
100 ba 68 65 315 1/mi n 0.4
90 bc 71 68
dc 74 71
80 280 1/mi n
de 77 74
0.3
70 ef 80 77
gf 83 80 250 1/mi n
60 gh 86 83
hj 89 86
kj 92 89 225 1/mi n
50 0.2
mk 95 92
mn 98 95
40 200 1/mi n
pn 101 98
p
q 104 101
qr 107 104
30
·
10000 20000 30000 50000 100000 200000 V m3/h
·
2 3 5 10 20 30 50 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
20 M08.HRE(TH) V2018/October
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 1800 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
5000 10000 20000 30000 50000 100000 V [C.F.M.]
%
ta
50
60
l
%
= Z (Heavy Model) 80 kW 100 kW Ef
68
125 kW fi c
%
q ien
77
3000 = Do not use in this area cy
60 kW η
p
50 kW 10
∆pt[Pa]
%
9
72
40 kW n
2000 8
32 kW
r
7
we
m
25 kW
Po
%
r 6
59
er
20 kW k
I nn
5
16 kW
j
1000 1 2 .5 kW 4
%
42
900 10 kW
h 8 0 0 1 /m in
800
8 kW 3
700
g 7 1 0 1 /m in∆pt
6 kW
600 [in.WG]
5 kW f
500 6 3 0 1 /m in 2
4 kW
e
400 3 .2 kW 5 6 0 1 /m in
2 .5 k W d
5 0 0 1 /m in
300 2 kW
c
1 .6 k W 4 5 0 1 /m in
1
b
1 .2 5 k W 0 .9
4 0 0 1 /m in
200 0 .8
1 kW a
0 .7
3 5 5 1 /m in
Unlined 0 .6
SWL
Plastic
Metal
Sound Power Level
Unlined
dB(A)
SWL
Outlet
Plastic Outlet
Metal
LwiA dB( A) 3 1 5 1 /m in
Duct
Outlet 0 .5
dB(A) Duct
Outlet*
Duct
a 65 Duct
61 *
100 ba 68 64 2 8 0 1 /m in 0 .4
90 bc 71 67
dc 74 70
80 2 5 0 1 /m in
de 77 73 0 .3
70 ef 80 76
gf 83 79 2 2 5 1 /m in
60 gh 86 82
hj 89 85
kj 92 88 2 0 0 1 /m in
50 0 .2
mk 95 91
mn 98 94 1 8 0 1 /m in
40 pn 101 97
p
q 104 100
qr 107 103
30
.
10000 20000 30000 50000 100000 200000 V m3/h
.
3 5 10 20 30 50 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
M08.HRE(TH) V2018/October 21
Performance
Curve
Fan test laborator y AMCA 210/99
HRE 2000 #
Power rating (kW) does not include transmission losses, Performance ratings do not
Fig.12, 140000 cmh Test Chamber. include the effects of appurtenances (accessories). The A-weighted sound ratings shown
Performance certified is for installation have been calculated per AMCA International Standard 301. Values shown are for inlet
type B-Free inlet, Ducted outlet. LwiA sound power levels for installation Type B: free inlet, ducted outlet.
·
10000 20000 30000 50000 100000 2 0 0 0 0 0V [C.F.M.]
5000 20
To
= K (Enhanced Model) ta
l
%
Ef
%
4000
50
125 kW fi c
60
%
= Z (Heavy Model) r 160 kW ien
68
%
100 kW cy
77
= Do not use in this area η
3000 80 kW q
∆pt[Pa] p
%
60 kW 10
72
50 kW 9
n
2000 8
4 0 kW
r
we
s 7
Po
%
32 kW m
59
er
6
I nn
25 kW
k
20 kW 5
16 kW j
%
1000 4
42
900 1 2 .5 k W 7 5 0 1 /m in
800 h
10 kW 3
700 ∆pt
8 kW g 6 3 0 1 /m in [in.WG]
600
6 kW f
500 5 6 0 1 /m in 2
5 kW
4 kW e
400 5 0 0 1 /m in
3 .2 k W d
4 5 0 1 /m in
300 2 .5 k W
c
2 kW 4 0 0 1 /m in 1
1 .6 kW b 0 .9
200 3 5 5 1 /m in 0 .8
1 .2 5 k W
a 0 .7
3 1 5 1 /m in
Unlined 0 .6
Plastic
SWL Metal
Unlined
Outlet
Plastic
dB(A)
SWL Duct
Outlet
Metal Sound Power Level
Outlet 2 8 0 1 /m in 0 .5
dB(A)
Duct
Duct
Outlet* LwiA dB( A)
a 65 Duct
60 *
100 ba 68 63 2 5 0 1 /m in 0 .4
bc 71 66
90
dc 74 69
80 de 77 72 2 2 5 1 /m in
0 .3
70 ef 80 75
gf 83 78
2 0 0 1 /m in
60 gh 86 81
hj 89 84
kj 92 87 1 8 0 1 /m in
50 0 .2
mk 95 90
mn 98 93
40 1 6 0 1 /m in
pn 101 96
p
q 104 99
qr 107 102
30
.
10000 20000 30000 50000 100000 200000 300000 V m3/h
.
3 5 10 20 30 50 V m3/s
1 2 3 5 10 20 C2[m/s]
* Sound power level with unlined metal outlet duct were obtained from the test in the reverberant room. Data are not licensed by AMCA.
22 M08.HRE(TH) V2018/October
Dimensions
HRE HRE
HRE 05 L1
L3
B2
L4 L2 B1
e
H6
H2
f x 125
A1
A2
A
p S
H5
H4
H
f1x125
t
e1
H1
h6
d
H7
OZ
C2
L5 L
C5
C3
Model A A1 A2 A3 B B1 B2 C C1 C2 C3 C4 C5 C6 d e e1
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
315 404 434 460 - 223 253 279 - - 434 440 - 283 - 25 - -
355 453 483 509 - 247 277 303 - - 493 470 - 318 - 30 - -
400 507 537 563 - 276 304 330 - - 547 497 - 338 - 30 168.5 -
450 569 599 625 - 310 338 364 - - 609 556 - 368 - 35 199.5 -
500 638 658 684 - 344 374 400 - - 678 592 - 404 - 35 204 -
560 715 745 771 - 383 413 439 - - 765 640 - 468 - 40 247.5 -
630 801 831 857 - 432 462 488 - - 851 690 - 512 - 45 265.5 -
Model F fx125
f1x125 H H1 H2 H3 H4 H5 H6 H7 L L1 L2 L3 L4 L5 S t p ØZ
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
315 - - - 578 235 343 343 280 138 240 149 280 236 282 518 198 100 60 28 8 13
355 - - - 655 266 389 389 355 156 270 150 355 261 317 578 231 97 60 33 8 13
400 - - - 736 301 436 436 355 178 311 190 355 290 361 651 252 129 60 33 8 13
450 - - - 827 336 491 491 530 202 358 149 530 322 404 726 277 76 70 38 10 13
500 - - - 918 375 543 543 530 219 379 194 530 352 448 800 302 110 70 38 10 13
560 - - - 1030 420 610 610 530 245 424 250 530 390 503 893 342 158 70 43 12 13
630 - - - 1157 472 685 685 530 278 481 314 530 434 565 999 381 208 70 48 14 13
We reserve the right to alter measurements without notice in case of technical improvements
M08.HRE(TH) V2018/October 23
Dimensions
HRE HRE
HRE 07 L3
L1 L2 B2
L4 B1
=
H6
F
H2
A1
A2
p S
H4
F
H5
H
t
=
h6
d = =
H1
H7
OZ
C2
L5 L
C5
C3
Model A A1 A2 B B1 B2 C C1 C2 C3 C4 C5 C6 d e e1 F
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
710 898 928 954 478 508 534 - - 518 736 - 568 - 60 - - 200
800 1007 1037 1063 533 563 589 - - 570 788 - 620 - 60 - - 250
900 1130 1160 1186 595 625 651 - - 632 867 - 702 - 65 - - 300
1000 1267 1297 1323 664 693 719 - - 713 950 - 783 - 65 - - 350
1120 1416 1478 1526 744 799 847 - - 782 1135 - 842 - 65 - - 400
1250 1578 1638 1688 825 875 925 - - 880 1218 - 950 - 70 - - 450
1400 1744 1826 1876 938 988 1038 - - 980 1337 - 1050 - 80 - - 500
1600 2020 2102 2152 1064 1114 1164 - - 1112 1517 - 1182 - 90 - - 550
1800 2270 2350 2430 1195 1285 1355 - - 1380 1795 - 1551 - 100 - - 600
2000 2520 2720 2640 1325 1415 1495 - - 1512 1957 - 1683 - 110 - - 650
Model fx125
f1x125 H H1 H2 H3 H4 H5 H6 H7 L L1 L2 L3 L4 L5 S t P ØZ
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
710 - - 1303 527 772 - 630 316 558 337 630 485 636 1121 422 214 90 64 18 17
800 - - 1468 595 869 - 710 359 639 379 710 535 715 1250 466 236 90 64 18 17
900 - - 1648 666 978 - 800 406 694 424 800 604 804 1408 515 260 100 69 18 17
1000 - - 1810 733 1075 - 900 433 772 455 900 657 884 1541 578 281 100 69 18 17
1120 - - 2033 830 1203 - 1000 482 876 617 1200 758 990 1748 640 235 140 69 18 17
1250 - - 2270 925 1345 - 1120 539 978 685 1350 840 1110 1950 715 238 140 74,5 20 17
1400 - - 2535 1033 1502 - 1250 620 1098 767 1500 920 1240 2160 810 275 140 85 22 17
1600 - - 2897 1180 1717 - 1400 700 1254 876 1700 1050 1418 2468 925 321 140 95 25 28
1800 - - 3235 1310 1924 - - 785 - - 1900 1219 1520 2739 - - 160 106 28 28
2000 - - 3608 1459 2149 - - 884 - - 2100 1375 1702 3077 - - 160 116 28 28
We reserve the right to alter measurements without notice in case of technical improvements.
24 M08.HRE(TH) V2018/October
Dimensions
HRE HRE
L1
I
L6 B HRE 315 - 1400 / 0°
A
H1
h1
C
L7 C1
P
C4
d
t
C6
RD 0 LG 0
L8
Model A B C C1 C4 C6 H H1 h1 I L1 L6 L7 L8 p S t d
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
315 404 223 556 612 283 556 518 332 50 138 368 733 1073 578 8 40 28 25
355 453 247 627 697 327 627 578 367 50 157 411 767 1150 655 8 50 33 30
400 507 274 654 724 354 654 651 411 50 178 460 835 1266 736 8 50 33 30
450 569 308 728 816 388 728 726 454 50 202 514 871 1357 827 10 70 38 35
500 638 344 764 850 424 764 800 528 80 219 561 910 1448 918 10 70 38 35
560 715 383 855 945 483 855 893 583 80 246 631 1057 1660 1030 12 90 43 40
630 801 432 904 994 532 904 999 645 80 278 707 1109 1787 1157 12 90 43 40
710 898 478 1005 1115 578 1005 1121 716 80 316 793 1168 1933 1303 14 90 48,5 45
800 1007 533 1060 1170 633 1060 1250 795 80 359 890 1292 2154 1468 14 90 48,5 45
900 1130 595 1191 1313 715 1191 1408 904 100 406 999 1363 2334 1648 16 100 58,5 55
1000 1267 664 1259 1381 783 1259 1541 984 100 433 1094 1430 2496 1810 16 100 58,5 55
1120 1416 744 1399 1557 890 1399 1768 1117 120 507 1203 1518 2682 2052 18 120 69 65
1250 1578 825 1565 1740 968 1565 1950 1230 120 539 1345 1705 3038 2270 20 140 74,5 70
1400 1744 938 1751 1910 1053 1751 2160 1360 120 620 1502 1921 3433 2511 22 140 74,5 80
NB: Model 1600, 1800 and 2000, please contact Wolter for overall dimensions.
We reserve the right to alter measurements without notice in case of technical improvements
M08.HRE(TH) V2018/October 25
Dimensions
HRE HRE
A
Basic frame and motor slide are included
H
H1
C
h1
L7 C1
P
C4
d
t
C6
RD 90 LG 90
L8
Model A B C C1 C4 C6 H H1 h1 I L1 L6 L7 L8 p S t d
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
315 404 223 556 612 283 556 641 288 50 376 236 777 975 480 8 40 28 25
355 453 247 627 697 327 627 718 322 50 429 261 812 1043 548 8 50 33 30
400 507 274 654 724 354 654 799 355 50 483 290 891 1143 613 8 50 33 30
450 569 308 728 816 388 728 890 391 50 543 322 934 1211 681 10 70 38 35
500 638 344 764 850 424 764 1011 460 80 599 352 978 1280 750 10 70 38 35
560 715 383 855 945 483 855 1123 507 80 673 390 1133 1475 845 12 90 43 40
630 801 432 904 994 532 904 1250 559 80 757 434 1195 1576 946 12 90 43 40
710 898 478 1005 1115 578 1005 1396 618 80 854 485 1266 1688 1058 14 90 48,5 45
800 1007 533 1060 1170 633 1060 1561 686 80 965 535 1401 1867 1181 14 90 48,5 45
900 1130 595 1191 1313 715 1191 1761 777 100 1083 604 1490 2005 1319 16 100 58,5 55
1000 1267 664 1259 1381 783 1259 1923 844 100 1177 657 1570 2148 1462 16 100 58,5 55
1120 1416 744 1399 1557 890 1399 2153 961 120 1323 758 1627 2305 1675 18 120 69 65
1250 1578 825 1565 1740 968 1565 2390 1057 120 1476 840 1897 2612 1825 20 140 74,5 70
1400 1744 938 1751 1910 1053 1751 2642 1153 120 1563 920 2107 2917 1975 22 140 74,5 80
NB: Model 1600, 1800 and 2000, please contact Wolter for overall dimensions.
We reserve the right to alter measurements without notice in case of technical improvements.
26 M08.HRE(TH) V2018/October
Dimensions
HRE HRE
L1 L6 B
HRE 315-1400 / 270°
H1
I
C
h1
L7 C1
P
C4
d
t
C6
L8
RD 270 LG 270
Model A B C C1 C4 C6 H H1 h1 I L1 L6 L7 L8 p S t d
size [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
315 404 223 556 612 283 556 628 393 50 202 236 777 975 480 8 40 28 25
355 453 247 627 697 327 627 705 439 50 227 261 812 1043 548 8 50 33 30
400 507 274 654 724 354 654 786 486 50 254 290 891 1143 613 8 50 33 30
450 569 308 728 816 388 728 877 541 50 285 322 934 1211 681 10 70 38 35
500 638 344 764 850 424 764 998 623 80 319 352 978 1280 750 10 70 38 35
560 715 383 855 945 483 855 1110 691 80 358 390 1133 1475 845 12 90 43 40
630 801 432 904 994 532 904 1237 766 80 401 434 1195 1576 946 12 90 43 40
710 898 478 1005 1115 578 1005 1383 852 80 449 485 1266 1688 1058 14 90 48,5 45
800 1007 533 1060 1170 633 1060 1548 949 80 504 535 1401 1867 1181 14 90 48,5 45
900 1130 595 1191 1313 715 1191 1748 1078 100 565 604 1490 2005 1319 16 100 58,5 55
1000 1267 664 1259 1381 783 1259 1910 1142 100 634 657 1570 2148 1462 16 100 58,5 55
1120 1416 744 1399 1557 890 1399 2166 1312 120 722 758 1627 2305 1675 18 120 69 65
1250 1578 825 1565 1740 968 1565 2403 1453 120 806 840 1772 2612 1825 20 140 74,5 70
1400 1744 938 1751 1910 1053 1751 2655 1542 120 886 920 1887 2917 1975 22 140 74,5 80
NB: Model 1600, 1800 and 2000, please contact Wolter for overall dimensions.
We reserve the right to alter measurements without notice in case of technical improvements
M08.HRE(TH) V2018/October 27
Dimensions
HRE HRE
Outlet
Approx.H Approx. L
Inlet
Approx. W1
Inlet
Aprrox. W2
Fan with this configuration are not licensed to bear the AMCA Seal.
Model H L W1 W2 Motor
size [mm] [mm] [mm] [mm] size
315 691 753 688 733 90S
355 768 825 748 793 90L
400 849 919 796 841 90L
450 940 1018 882 927 100L
500 1091 1102 960 1005 112M
560 1203 1224 1112 1157 132S
630 1330 1356 1225 1270 132M
710 1476 1503 1294 1339 132M
800 1641 1672 1490 1535 160M
900 1861 1863 1639 1684 160L
1000 2023 2035 1751 1796 160L
1120 2273 2183 2016 2061 200L
1250 2510 2415 2152 2197 225S
1400 2762 2705 2413 2458 250M
NB: Dimension above for the fan with LG / RD 90 Deg and 270 Deg. Model 1600, 1800 and 2000, please contact Wolter for overall dimensions.
For smoke spill applications the model of fan used is type HRE (backward curve impeller). Impellers and inlet cones are manufactured from mild steel
and suitably reinforced for high temperatures applications.
We reserve the right to alter measurements without notice in case of technical improvements.
28 M08.HRE(TH) V2018/October
Technical Information
V· 2 n2
V· 2
( )
___ ___ D2 3
= ___ ___
V· 1 n1 =
V· 1 D1
( ) ( ) ( )
·
Dp1
___ n1 ²
___ V1 ²
___ Dp1
___ D1
___
2
= = ·V =
Dp2 n2 2 Dp2 D2
( ) ( ) V· 1
( )
3 3 5
P1
___ n1
___ ___ P1
___ D1
___
= = =
P2 n2 V· 2 P2 D2
• Pressure ≈ Density
• Total pressure
Dp1
___ ρ1
___ T2
___
= =
Dp2 ρ2 T1
pt = pst + pd
M08.HRE(TH) V2018/October 29
Coordination Fan Plant
.
V
.
V
a) b)
pt pt 2
2 1
pst’
B2
1 pt2
pst’
pt1 B1
pt2 B2 V
pt1 B1
. .
V V
. . . . . .
V2 V1 V V2 V1 V
30 M08.HRE(TH) V2018/October
Operating and Maintenance Instructions
These fans are produced on modern machines and equipment. The rotors (impellers with shaft) are carefully balanced. Each fan is controlled and tested before
it leaves the factory.
Operation
Switch on the fan for a short moment to check whether the direction of rotation is correct (See arrows at the fan casing).
If incorrect, change the direction of rotation by changing the wiring. (Respect the instructions of power supply companies).
Maintenance
The fans are maintenance free, only a control regarding contamination (fat, dust, etc.) has to be carried out.
The bearings are sealed for life with lithium base grease, suitable for approx. 20.000 operating hours. If the fan is operated more than 20.000 hours, or in case the
bearings are damaged, they have to be exchanged (if bearings with rubber sealing, also this sealing has to be exchanged - a bearing chart is attached).
The bearings are equipped with a locking ring. To remove the bearing, this locking ring has to be loosened and the casing of the bearing has to be opened - then
the bearing can be taken off from the cleaned and degreased shaft.
Important for a constantly good performance of the fan is a clean impeller.
Belt tension
Regular control of belt tension is very important. In any case, the belt tension has to be controlled after the first 100 operating hours, and then every 1000 operating
hours or at least once a year. The belt tension is controlled by “pressing the belt with the fingers” (See drawing 1). A good tension is achieved by a total bending
of approx. 2-3 cm. Used belts have to be replaced by belts of the same type. Control at the same time the fixation of the belt disc at the axis and the alignment
of the belt. (See drawing 2)
(Drawing 1) Belt tension bending of approx. 2-3 cm. (Drawing 2) alignment of the belt disc.
M08.HRE(TH) V2018/October 31
Wolter Sales Network
Inland United Kingdom: India:
Ing. Günther Rößler Wolter (UK) Ltd. Wolter Ventilators India Pvt. Ltd.
D-07619 Schkölen GB-Leicestershire LE65 1AL 867 D, Block-A, Sushant Lok, Phase-I,
Tel. (+49) 03 66 94 / 22 359 Tel. (+44) 01530 / 412 473 Gurgaon - 122009 (Haryana)
Fax (+49) 03 66 94 / 22 357 info@wolteruk.com Tel. +91 124 2577797, 4261001-3
guenther.roessler@wolterfans.de sales@wolterindia.in
Middle East and North Africa
Mattias Industrievertretungen Indonesia:
D-16259 Bad Freienwalde Israel: PT Lung Makmur Abadi.
Tel. (+49)03344/301994 Pach Taas (Ashkelon) Ltd. Kawasan Pergudangan Taman Tekno Blok
Fax (+49)03344/301996 IL-78100 Ashkelon M/16, Serpong-Tangerang 15310
thomas.mattias@wolterfans.de Tel. (+972) 0 8 / 67 19 770 Tel. +62 (0) 21 / 7588 2609 ext 104
Fax (+972) 0 8 / 67 19 771 Fax +62 (0) 21 / 7588 2610
Industrieservice Drexler info@pachtaas.com lma.wolter@gmail.com
D-49080 Osnabrück
Tel. (+49) 0 541 / 20 04 88 3 UAE, Qatar, Lebanon, Jordan, Korea:
Fax (+49) 0 541 / 20 04 88 4 Saudi Arabia: Kaceco-Wolter
wolfgang.drexler@wolterfans.de
Energy International Co. 14-1, Dang-dong,Gunpo-shi, Gyeonggi-do
Burkhardt Projekt GmbH UAE-Sharjah, P.O. Box 3562 Tel. +82 (0) 31 / 4773 104
D-67583 Guntersblum Tel. (+971) 06 / 53 43 477 Fax +82 (0) 31 / 4773 132
Tel. (+49) 0 62 49 / 82 01 Fax (+971) 06 / 53 43 756 wolter@kaceco.com / info@kaceco.com
Fax (+49) 0 62 49 / 88 58 fsalibi@energysh.ae
Malaysia:
info@bp-wolter.de Energy International Co.
P.O. Box 45217 Abu Dhabi, UAE Vibrantech (M) Sdn Bhd.
Friedrich Glock Tel. (+971) 2 67 11 10 8 47200 Petaling Jaya Selangor, Malaysia
D-97980 Bad Mergentheim Fax (+971) 2 67 69 669 Tel. +603 (0) 7847 3500
Tel. (+49) 0 79 31 / 37 44 amohsen@energyintl.ae Fax +603 (0) 7847 3380
Fax (+49 )0 79 31 / 28 58 sales@vibrantech-sb.com
friedrich.glock@wolterfans.de Energy International Co.(Dubai-Sharjah)
P.O. Box 3562 Sharjah, UAE Singapore:
Europe Tel. (+971) 65 34 34 77
Wolter Pte. Ltd.
Fax (+971) 65 34 37 56
SG-569738 Singapore
Danmark: fsalibi@energysh.ae
Tel. (+65) 0 63 / 52 95 48
Aircon Teknik A/S Energy International Corporation Fax (+65) 0 63 / 52 95 47
DK-8200 Aarhus N Malaz Area, Siteen Highway Beside BANK info@wolterfans.com.sg
Tel. +45 (0) 86 / 34 51 11 ALBILAD Riyadh, Saudi Arabia
Fax +45 (0) 86 / 34 58 10 Tel. (+966) 14 15 39 59 Sri Lanka:
post@airconteknik.dk msheet@energyintl.com Sirocco Air Technologies (Pvt) Ltd.
Energy International Corporation 28/12, Gemunu Mawatha, Kotuwegoda,
The Netherlands: Rajagiriya, Sri Lanka
P.O. Box 37364 Doha, Qatar
AirFan B. V. Tel. (+974) 45 80 765 Tel. +94 11 7 392 010
NL-7442 CX Nijverdal Fax (+974) 45 81 126 Fax +94 11 7 392 015
Tel. (+31)054/8366366 aassi@energyintl.com suren@sairt.com
Fax (+31)054/8365320
ventilatie@airfan.nl Energy International Taiwan:
234 Balbesi Blg 2nd floor Al-Madinah,
Waxlink International Co., Ltd.
Poland: Al Munawarah St Amman, Jordan
8F-2 No.218 Roosevelt Rd., Sec,6
Tel. (+962) 65 67 19 15
Wentoprodukt Taipei, Taiwan
Fax (+962) 65 67 19 16
44-100 Gliwice Tel. (+886) 02 / 8932 1196
eabuzahra@energyintl.com
Tel. (+48)32 33 13 424 Fax (+886) 02 / 8932 1197
Fax (+48)32 72 97 653 75 Energy International & Engineering waxlink@mail.waxlinktw.com
biuro@wentoprodukt.pl Mar Roukoz Center-Block B - First Floor,
Hazmieh, Lebanon Thailand:
Russia: Tel. (+961) 54 50 61 0 Wolter Ventilation Co., Ltd.
Daichi Co. Ltd Fax (+961) 54 51 16 9 Thamai Kratumban Samutsakorn 74110
RU-123022 Moscow bsaab@energyintl.com Thailand
Tel. +7 (0) 495 / 73 73 733 Tel. +66 (0) 3486 6555
Fax +7 (0) 495 / 73 73 732 Asia Fax +66 (0) 3486 6599
info@daichi.ru China Mainland: natiphan@wolterfan.com
Switzerland: Dongguan Wolter Chemco Ventilation Ltd.
Chemco Building, Miao Bian Wang Ind. Australia
Anson AG Zürich Shipai, Dongguan City, Guangdong
CH-8055 Zürich The Sydney Fan Company.
Tel. (+86) 0 769 / 8655 7298
Tel. (+41) 0 44 / 46 11 111 Fax (+86) 0 769 / 8655 7278 NSW 2147, Sydney, Australia
Fax (+41) 0 44 / 46 13 111 info@wolterfans.com Tel. +61 (0) 2 / 9624 4000
info@anson.ch Fax +61 (0) 2 / 9624 4100
Taizhou Wolter Ventilation Co. Ltd.
Ventra Technik AG sales@thesydneyfancompany.com
Hengjie, Luqiao District
CH-8599 Salmsach Taizhou City, Zhejiang
Tel. (+41) 0 71 / 46 11 447 Tel. (+86) 0 576 / 26 22 666 (26 52 888)
Fax (+41) 0 71 / 46 11 448 Fax (+86) 0 576 / 26 56 830
ventra@bluewin.ch
Hongkong:
Turkey:
Wolter Asia Ltd.
Air Trade Centre Ltd Sti Türkiye, Hong Kong
TR-34418 Seyrantepe / Instanbul Tel. (+852) 0 2456 0198
Tel. (+90) 02 12 / 28 34 510 Fax (+852) 0 2456 0290
Fax (+90) 02 12 / 27 83 964 info@wolter.com.hk
atc.turkey@airtradecentre.com
Wolter GmbH
Maschinen-und Apparatebau KG
Am Wasen 11
D-76316 Malsch / Germany
Tel. +49 (0) 7204/9201-0
Fax +49 (0) 7204/9201-11
www.wolter.eu
info@wolter.eu
&
Air in Motion - Wolter Fans - www. wolterfans.de
Wolter Ventilation Co., LTD. • 29 Moo.8 Soi Viroonraj, Settakij Rd Thamai Kratumban Samutsakorn,THAILAND
74110 • Tel. 66 3486 6555 • Fax 66 3486 6599 • www.wolterfans.com • Natiphan@wolterventilation.com