Professional Documents
Culture Documents
Research Design
The research design the will be used in this study is Completely Randomized
Design (CRD). The experiment will be involved in two treatments, each treatment will be
replicated two times. To easily determine the difference and test the hypotheses, both
Banana Pseudo-Stem Decorative paper and Coconut Husk Decorative paper will
undergo water absorbancy as physical test. It will differ in the amount of water and
Produces:
Banana Pseudo-Stem
The Banana Pseudo-Stem that will be used in making the decorative paper will
come from brgy. Alumbrado Nagcarlan, Laguna that will be provided by the researcher.
The baking soda that will be used to soften the Banana Pseudo-Stem will come from
sari-sari store in Rizal Laguna. In order to make the decorative paper, first cut the
Banana Pseudo-Stem into smaller pieces to make it easier to boil. About 40g of Banana
Pseudo-Stem was used. Ready the pot and water and bring it to boil. The water must
be more than the amount of Banana Pseudo-Stem. Then put the Banana Pseudo-Stem
and boil it for 10 minutes. After 10 minutes, add 25g of baking soda to soften the
Banana Pseudo-Stem. Then boil the Banana Pseudo-Stem in baking soda for another
20mins. Ready the mortar and pestle and flatten the Banana Pseudo-Stem. To extract
its fiber, put the flattened Banana Pseudo-Stem in tap water. Prepare 7 tbsp of
COMPARISON OF BANANA PSEUDO-STEM FIBER AND COCONUT HUSK
FIBER IN PRODUCING DECORATIVE PAPER
cornstarch and 1ml of hot water to create a slurry. Mix the slurry with the Banana
Pseudo-Stem fiber and let it dry in a piece of fabric cloth for more than 48 hours or 2
days.
Coconut Husk
The Coconut Husk that will be used to make the decorative paper will come from
brgy. Alumbrado Nagcarlan, Laguna. The baking soda that will be used to soften the
coconut husk will come from sari-sari store in Rizal Laguna. In order to make the
decorative paper, first, peel the coconut husk and cut it into tiny pieces. Prepare a pot
and water then bring it to boil. After boiling, put the coconut husk and boil it for 10
minutes. After 10 minutes, add 25g of baking soda and boil it for another 20 minutes.
Ready the mortar and pestle for the fibers to shown more and to extract the fibers, mix
the slurry with the coconut husk fiber and put it in tap water.
COMPARISON OF BANANA PSEUDO-STEM FIBER AND COCONUT HUSK
FIBER IN PRODUCING DECORATIVE PAPER