Professional Documents
Culture Documents
Report Stress Analysis - Support Cooling Tower
Report Stress Analysis - Support Cooling Tower
Author User
Project
Mass 756.074 kg
Area 27124100 mm^2
Volume 105745000 mm^3
x=84.3169 mm
Center of
y=201.887 mm
Gravity
z=124.589 mm
Note: Physical values could be different from Physical values used by FEA reported below.
Static Analysis:1
General objective and settings:
Design Objective Single Point
Study Type Static Analysis
Last Modification Date 1/3/2023, 5:39 AM
Detect and Eliminate Rigid Body Modes No
Separate Stresses Across Contact
No
Surfaces
Motion Loads Analysis No
Mesh settings:
Avg. Element Size (fraction of model
0.1
diameter)
Min. Element Size (fraction of avg. size) 0.2
Grading Factor 1.5
Max. Turn Angle 60 deg
Create Curved Mesh Elements No
Use part based measure for Assembly mesh Yes
Material(s)
Name Iron, Cast
Mass Density 7.15 g/cm^3
General Yield Strength 758 MPa
Ultimate Tensile Strength 884 MPa
Young's Modulus 120.5 GPa
Stress Poisson's Ratio 0.3 ul
Shear Modulus 46.3462 GPa
Part BAGIAN 1.ipt
Name(s) ISO 657/11 CH 140 x 15 - 1700
ISO 657/11 CH 140 x 15 - 2945
ISO 657/11 CH 140 x 15 - 1700
ISO 657/11 CH 140 x 15 - 2945
ISO 657/11 CH 140 x 15 - 1699.83
ISO 657/11 CH 140 x 15 - 1699.83
ISO 657/11 CH 140 x 15 - 1700
ISO 657/11 CH 140 x 15 - 2945
ISO 657/11 CH 140 x 15 - 1700
ISO 657/11 CH 140 x 15 - 2945
ISO 657/11 CH 140 x 15 - 1100
ISO 657/11 CH 140 x 15 - 1100
ISO 657/11 CH 140 x 15 - 1100
ISO 657/11 CH 140 x 15 - 1100
ISO 657/11 CH 140 x 15 - 1729.83
ISO 657/11 CH 140 x 15 - 1729.83
ISO 657/11 CH 140 x 15 - 1840
ISO 657/11 CH 140 x 15 - 1840
ISO 657/11 CH 140 x 15 - 1840
ISO 657/11 CH 140 x 15 - 1840
ISO 657/11 CH 140 x 15 - 1946.86
ISO 657/11 CH 140 x 15 - 1954.16
ISO 657/11 CH 140 x 15 - 1946.86
ISO 657/11 CH 140 x 15 - 1029.9
ISO 657/11 CH 140 x 15 - 1010.7
ISO 657/11 CH 140 x 15 - 996.91
ISO 657/11 CH 140 x 15 - 1000
ISO 657/11 CH 140 x 15 - 1000.12
ISO 657/11 CH 140 x 15 - 1000
ISO 657/11 CH 140 x 15 - 1307.29
ISO 657/11 CH 140 x 15 - 1274.59
ISO 657/11 CH 140 x 15 - 1263.2
ISO 657/11 CH 140 x 15 - 1274.64
ISO 657/11 CH 140 x 15 - 1274.68
ISO 657/11 CH 140 x 15 - 1263.2
ISO 657/11 CH 140 x 15 - 1274.68
ISO 657/11 CH 140 x 15 - 1263.2
Name Generic
Mass Density 1 g/cm^3
Yield Strength 0 MPa
General
Ultimate Tensile
0 MPa
Strength
Young's Modulus 0.0000001 GPa
Stress Poisson's Ratio 0 ul
Shear Modulus 0.00000005 GPa
Part Name(s) Reference Skeleton
Operating conditions
Force:1
Constraint
Fixed Constraint
Type
Selected Face(s)
Contacts (Bonded)