Professional Documents
Culture Documents
Lightweight – only 8 kg
Powerful 5 A – 100 A DC
Measuring range 0 – 999,9 mΩ
Resolution to 0,1 µΩ
Typical accuracy 0,1 %
Remote Control Unit (optional)
Both Sides Grounded Unit (optional)
Rmax function
Description
RMO100G is a Micro Ohmmeter based on a Using the DV-Win the result can be arranged as
state of the art technology, using the most an Excel spread-sheet which can be later shown
advanced switch mode technique available as a diagram and printed for a report.
today. RMO100G generates a true DC ripple- The set is equipped with a thermal and an
free current with automatically regulated test overcurrent protection. The RMO100G has a
ramps. During a test the RMO100G ramps with very high ability to cancel electrostatic and
increasing current before measuring and electro-magnetic interference in HV electric
decreasing current after the measurement. This fields. It is achieved by very efficient filtration.
eliminates magnetic transients. After the test The filtration is made utilizing a proprietary
current has been set, the automatic test hardware and software.
procedure is started by pressing the Ω-button.
The RMO100G instrument can store internally The RMO100G instrument has three separate
up to 500 measurements. All measurements are test modes:
time and date stamped. Using the DV-Win soft-
ware a test can be performed from a user’s PC,
SINGLE mode
and the results can be obtained directly on the CONTIN mode
PC. Communication between the RMO100G BSG mode
B-RMO100GN-300-EN
1
Single Test Continuous Test
The RMO100G instrument generates a filtered RMO100G can generate DC current
(true) DC current and output it in an continuously using the Contin menu. In this
automatically regulated current ramp. By sloping menu the current can be chosen the same way
the current up and down, magnetic transients like in the Single menu, but the duration of the
are virtually eliminated. Below is an example of test can be preset.
single test ramp for the 100 A current. The RMO100G current output is rated at 100 A
for 300 s (5 min) with no rest time needed
between tests, at 25°C ambient temperature.
BSG test
This test mode is specially designed for Both
Sides Grounded testing. A current clamp meter
is used for measuring the current through the
grounding. The test setup is very simple (same
as for the SINGLE test) and all calculations are
made automatically by the device internal
algorithm.
Application
Typical application is measuring resistance of non-inductive test objects:
Cable splices
Welding joints
measurement.
2015-06-17
2
Both Sides Grounded Unit Remote Control Unit
Using RMO100G with both sides grounded The RMO Remote Control Unit is an optional
option it is possible to make safer measurement control unit that is used to start and stop the
of breakers with both terminals of the breaker tests from a remote location, away from the
grounded. actual RMO.
3
The output current is filtered and has a ripple of Both Sides Grounded Unit (requires current
less than 1 %. clamps available as optional accessory)
The instrument has a very high typical accuracy Remote Control Unit (enables remote
± (0,1 % rdg + 0,1 % FS), with the best testing; optional accessory)
resolution of 0,1 µΩ. Rmax feature (pass/fail criteria, enabled
Several advanced features are available as with the device and the DV-Win software)
standard/optional accessories: Built-in thermal printer (optional accessory)
DV-Win software
DV-Win software provides acquisition and After performed measurements results can be
analysis of the test results, as well as control of saved in a various formats and test report can
all the RMO functions from a PC. The DV-Win be generated and saved or printed. Result can
also provides several advanced features as a also be downloaded from the device to the PC
supplement to multiple functions of RMO by use of several different search filters.
devices. Testing in Continuous mode is For the RMO form of DV-Win software there is
upgraded with a sample time feature which Help menu available, with detailed instructions
allows user to record test results in specific time and explanations of all functions and features.
intervals set in seconds.
4
Technical data
Mains power supply Environmental conditions
Standard EN 61326-1:1006
computer)
CAN/CSA-C22.2 No.61010-1, 2nd edition,
including Amendment 1
Test Result Storage
RMO100G can store up to 500 measurements Warranty
2015-06-17
3 Years
All specifications herein are valid at ambient temperature of + 25 °C and recommended accessories.
Specifications are subject to change without notice.
5
Voltage sense cables Current cables Extension cable
Order info
Instrument with included accessories Article No
Micro Ohmmeter RMO100G
DV-Win PC software including USB cable
RMO100G-N-00
Mains power cable
Ground (PE) cable