Professional Documents
Culture Documents
Select switch
Pressing this switch toggles the functional modes in the following order:
Functional mode Toggling order
V /
Ω / / Ω Ω
(Without symbol) REL (Without symbol) REL
400 / 4000 µA /
40 / 400 mA /
Immediately after the Function switch has been changed, the leftmost functional mode in the
right column of the above table is selected in the auto mode.
The PC20TK provides no automatic power-off capability. After finishing measurement, be
sure to turn OFF the Function switch.
The following explanation is made assuming that the auto mode is active:
When the mark appears on the upper right part of the readout, the built-in batteries have
run out. Replace the batteries.
Be sure to turn OFF the Function switch after finishing measurement. The batteries would
otherwise be consumed.