Professional Documents
Culture Documents
4 General description
5 Electrical connections
The unit should be installed at the working place with the holes preferred
for wall mounting.
At choosing the installation place, please observe that the unit is not in
contact with corrosive fume.
Connect only by DIN VDE 298 T4 2/89 admitted supply cables, which
have, admitting to DIN 57100 part 523 / VDE 0100 Part 523.6.81, enough
diameter, to the power supply connector L1, N, PE.
Pay attention to the correct connection of PE and N.
Provide for an allowable fuse admitted to DIN 57100 Part 430 / VDE 0100
Part 430.6.81.
Look for the DIN 57100 Part 523 / VDE 0100 Part 523.6.81 admitted
cable diameter and the correct polarity.
3000-2_gsq34_e.doc 4/10