Professional Documents
Culture Documents
ACGT™/ACGTL™ Rings
Effective Sealing in Extreme Pressures and Temperatures
The key to the seals’ outstanding performance is the separation of the sealing and
ACGT Piston anti-extrusion functions. This allows the optimum selection of materials with specific
characteristics, such as a highmodulus elastomer for static side/seal energizer, high
shear strength material for anti-extrusion rings and long-wearing, low-friction material
for caps.
Applications
ACGTL Rod • Landing gear shock struts
• Heavy duty utility actuators
• Long stroke actuators (e.g., door actuators, retract actuators)
• Extremely long-life, high-pressure systems
• Flight control actuators
Contact Us
Statements and recommendations in this publication are based on our experience and knowledge of typical applications of this
Greene Tweed Tel: 0 +1.215.256.9521 product and shall not constitute a guarantee of performance nor modify or alter our standard warranty applicable to such products.
Kulpsville, PA, USA Fax:0 +1.215.256.0189 © 2018, Greene Tweed all rights reserved. All trademarks are property of their respective owners. 09/18-GT DS-US-AS-017
www.gtweed.com
ACGT™/ACGTL™ Configurations Part Numbering System
Gland Dimensions The part numbering system requires the use of the material
designator tables found on the next page. For nonstandard
ACGTL Rod designs contact GT engineering.
2 6 X X X X X X X X X X X X X
ACGT/ACGTL Dash size per Elastomer Cap/back-up
series MIL-G-5514/AS4716/ compound ring material
AS4832 designator designator
0 = Standard
XX Standard* Rod Piston
1–9 = Nonstandard
00 Standard
01–69 Nonstandard
70 Standard
71–99 Nonstandard
ACGT Piston
Gland width
2 6 3 4 2 5 0 0 7 7 2 6 0 1 0
4.497 in. Rod FKM, Avalon® 89
diameter Fluorocarbon Cap with
maximum compound NWR backup
Rod Standard Standard
one back-up “L” type
gland width
2 6 6 2 1 0 0 0 1 6 0 6 0 6 0
0.991 in. Bore NBR, Nitrile Avalon 89®
Contact Us
Statements and recommendations in this publication are based on our experience and knowledge of typical applications of this
Greene Tweed Tel: 0 +1.215.256.9521 product and shall not constitute a guarantee of performance nor modify or alter our standard warranty applicable to such products.
Kulpsville, PA, USA Fax:0 +1.215.256.0189 © 2018, Greene Tweed all rights reserved. All trademarks are property of their respective owners. 09/18-GT DS-US-AS-017
www.gtweed.com
Material Designator Tables
954 EPDM, Ethylene Propylene Note: All back-up rings are scarf cut. For solid back-up rings
contact GT engineering.
964 NBR, Nitrile
See GT Surface Finish guidelines.
Contact Us
Statements and recommendations in this publication are based on our experience and knowledge of typical applications of this
Greene Tweed Tel: 0 +1.215.256.9521 product and shall not constitute a guarantee of performance nor modify or alter our standard warranty applicable to such products.
Kulpsville, PA, USA Fax:0 +1.215.256.0189 © 2018, Greene Tweed all rights reserved. All trademarks are property of their respective owners. 09/18-GT DS-US-AS-017
www.gtweed.com