Professional Documents
Culture Documents
25
TOTAL HEAD IN FEET
Phase Single 20
MS5
0, 1 6
/2 H
MS P
Cord Length 10’ & 20’ 3.1 m & 6.1 m 33,
1/3
15 HP
Switch Options PV, PT, PD & M
10 3
Impeller Material Semi-Open Reinforced Thermoplastic
Housing Material Zinc 5
4 See ordering table starting on page 52 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SUMP PUMPS
Heavy Duty Cast Iron Pump For Sump or
Light Effluent Applications
• Rugged cast iron pump body and motor cover with stainless steel
hardware construction.
• Upper sleeve and lower ball bearing construction for long life.
• Available in manual or with multiple piggy-back automatic switch
options to fit in various basin sizes.
MDC
Maximum Capacity 62 GPM 234 LPM
Maximum Shut-off Head 32’ 9.8 m
Discharge 1-1/2” 38.1 mm
CAPACITY LITERS PER MINUTE Solids Handling 1/2” 12.7 mm
0 50 100 150 200 250
40 Voltage 115
35
Full Load Amps See page 52 for details
TOTAL HEAD IN METERS
10
TOTAL HEAD IN FEET
30 MDC
50 1 Phase Single
/2 H 8
25 P
Cord Length 10’, 20’ & 30’ 3.1 m , 6.1 m & 9.1 m
20 MD 6
C33
1/3 Switch Options PD, PT, PV & M
15 HP
4
Impeller Material Semi Recessed Vortex Reinforced Thermoplastic
10
5
2 Housing Material Cast Iron
8
TOTAL HEAD IN FEET
25 MSCI5
0 1/2 Phase Single
HP
20
MSC
6 Cord Length 10’, 20’ & 50’ 3.1 m, 6.1 m & 15.2 m
I33 1
/3H
15 P
4
Switch Options PV, PT, PD & M
10 Impeller Material Semi Open Reinforced Thermoplastic
2
5 Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 10 20 30 40 50 60 70 80 90
CAPACITY GALLONS PER MINUTE Warranty Years 3
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 52 for details on specific models. 5
SUMP PUMPS
Cast Iron Submersible
Sump Pump
• 2-Pole switch design allows for opeation in narrow sump basins.
• Reliable capacitor free design with shaded pole motor.
• Pump intake screen, volute base, switch and power cord
are serviceable.
HP 1/3
Maximum Capacity 32 GPM 121 LPM
Maximum Shut-off Head 23’ 7.0 m
Discharge 1-1/2” 38.1 mm
Solids Handling 1/2” 12.7 mm CAPACITY LITERS PER MINUTE
0 15 30 45 60 75 90 105 120
Voltage 115 25
7
Full Load Amps 9.0 SSM3
TOTAL HEAD IN METERS
3 I 1/3H 6
20 P
TOTAL HEAD IN FEET
Phase Single 5
15
Cord Length 10’ & 20’ 3.1 m & 6.1 m 4
Switch Options PV, PT & M 10 3
6 See ordering table starting on page 52 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SUMP PUMPS
Durable Pedestal
Sump Pump
• Fits 12” diameter x 24” deep or larger sump pits.
• Top mounted adjustable float switch for easy accessibility.
• Top-screened inlet to reduce clogging.
HP 1/3
Maximum Capacity 54 GPM 204 LPM
MCSP
Maximum Shut-off Head 18’ 5.5 m
Discharge 1-1/4” 31.8 mm
Solids Handling 1/4” 6.4 mm
5
TOTAL HEAD IN FEET
15
MC Cord Length 6’ 1.8 m
SP 4
1/3
HP Switch Options V (Vertical)
10 3
Impeller Material Open Reinforced Thermoplastic
2 Housing Material Metal
5
1 Column Material Stainless Steel or Thermoplastic
0
Volute Material Cast Iron & Thermoplastic or Thermoplastic
0
0 10 20 30 40 50
CAPACITY GALLONS PER MINUTE Warranty Years 3
25
TOTAL HEAD IN FEET
Phase Single
20 6
Cord Length 15’ 4.6 m
15 DS7
5 3/4 Switch Options PT
HP
10 DS5 3 Impeller Stainless Steel Vortex
DS
01
/2 H
33
P
1/
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 53 for details on specific models. 7
SUMP PACKAGES
Pre-Plumbed Undersink Sump
System with MS33PV10 Pump
• Pre-packaged sink pump system is ready for quick installation
with the pre-plumbed discharge pipe.
• Pumps water from laundry trays, washing machines, wet bars,
water softeners, dehumidifiers, etc.
• Built in serviceable strainer basket inside basin.
ED-MS33PV10
HP 1/3
Maximum Capacity 53 GPM 200 LPM
Maximum Shut-off Head 24’ 7.3 m
Discharge 1-1/2” 38.1 mm Pump Only
Solids Handling 3/16” 4.8 mm
Voltage 115
Full Load Amps 3.9 CAPACITY LITERS PER MINUTE
Phase Single 30
25 50 75 100 125 150 175 200 225
9
Cord Length 10’ 3.1 m
Switch Options PV (Piggy-Back Vertical)
HP 1/3
ED33V1
8 See ordering table starting on page 53 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SUMP PACKAGES
Pre-Plumbed Sump System with
MS33PV10 Pump
• Pre-packaged system is ready for quick installation to save time.
• Includes pre-plumbed basin, lid, sump pump, check valve and
discharge pipe.
• Ideal for new or replacement construction.
HP 1/3
MS1822
Maximum Capacity 53 GPM 170 LPM
Maximum Shut-off Head 24’ 7.3 m
Discharge 1-1/2” 38.1 mm
Pump Only
Solids Handling 3/16” 4.8 mm
Voltage 115
Full Load Amps 3.9
CAPACITY LITERS PER MINUTE Phase Single
25 50 75 100 125 150 175 200 225
30 9 Cord Length 10’ 3.1 m
Switch Options PV (Piggy-Back Vertical)
TOTAL HEAD IN METERS
25
TOTAL HEAD IN FEET
8
TOTAL HEAD IN FEET
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 53 for details on specific models. 9
BATTERY BACKUP UNITS
Classic Battery Backup System and Combo
Unit for Emergency Dewatering
• Backs up residential sump pump during power outage or primary
pump failure. Alarm sounds when backup pump is activated.
• Proprietary Smart Charging Technology recharges battery up to
5X faster and extends battery life.
MBSP-2 & MBSP-2C
4
Phase Single
TOTAL HEAD IN FEET
10 MB
Cord Length 8’ 2.4 m SP
-3 3
HP 1/3
Maximum Capacity 45 GPM 170 LPM
Maximum Shut-off Head 21’ 6.4 m
Discharge 1-1/2” 38.1 mm
Solids Handling 3/4” 19.0 mm CAPACITY LITERS PER MINUTE
0 25 50 75 100 125 150 175
Voltage 115 25
7
PERFORMANCE
Full Load Amps 13.0
HP 1/2
Maximum Capacity 100 GPM 379 LPM Notice: PW217-280
Maximum Shut-off Head 50’ 15.2 m Control Panel Required
(sold separately)
Discharge 2” 50.8 mm
Solids Handling 3/4” 19.0 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400
Voltage 115 60
16
Full Load Amps 12.0
TOTAL HEAD IN METERS
50
TOTAL HEAD IN FEET
12 See ordering table starting on page 53 for details on specific models. © 2019 Pentair plc. All Rights Reserved
EFFLUENT PUMPS
Cast Iron or Naval Bronze Corrosion
Resistant Submersible Effluent Pump
• Oil-filled motor with automatic reset thermal overload for
maximum protection.
• Piggy-back plug available for easy maintenance and replacement.
• Upper and lower single-row ball-bearing construction.
HP 1/2
MEOSP
Maximum Capacity 60 GPM 227 LPM
Maximum Shut-off Head 25’ 7.6 m
Discharge 2”* 50.8 mm
Solids Handling 5/8” 15.9 mm
CAPACITY LITERS PER MINUTE
30
0 40 80 120 160 200 Voltage 115 & 230
Full Load Amps See page 53 for details
8
TOTAL HEAD IN METERS
25
Phase
TOTAL HEAD IN FEET
MEO
SP5
Single
20 0 1/
2 HP 6 Cord Length 10’ & 20’ 3.1 m & 6.1 m
15 Switch Options PD & M
4
Recessed Vortex Reinforced Thermoplastic or
10 Impeller Material
Open Recessed Vortex Bronze
2
5 Housing Material Cast Iron or Bronze
0 0 Volute Material Cast Iron or Bronze
0 10 20 30 40 50 60
CAPACITY GALLONS PER MINUTE Warranty Years 3
* includes 1-1/2” adapter
See ordering table starting on page 53 for details on specific models.
HP 1/3
Maximum Capacity 66 GPM 250 LPM ME3
Maximum Shut-off Head 35’ 10.7 m
Discharge 1-1/2” 38.1 mm
CAPACITY LITERS PER MINUTE Solids Handling 3/4” 19.0 mm
0 50 100 150 200 250
40 12 Voltage 115 & 230
ME3
H 1/
35 3 HP Full Load Amps See page 53 for details
TOTAL HEAD IN METERS
10
TOTAL HEAD IN FEET
30
Phase Single
25 8
ME3
F 1/
3 HP
Cord Length 20’ 6.1 m
20 6
Switch Options PT & M
15
4
10
Impeller Material Reinforced Thermoplastic Impeller
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 53 for details on specific models. 13
EFFLUENT PUMPS
Cast Iron Submersible
Effluent Pump
• Bearings and mechanical seal - Permanently lubricated
for long life.
• Intake - built-in suction screen.
• Overload protection - Built-in thermal overload with
automatic reset.
HP 4/10
ME4
Submersible Effluent
and Drain Water Pump
• Positive sealing, quick-connect float and switch cords make
replacement simple if service is ever necessary.
• Enclosed design for high-efficiency pumping eliminates possibility
of jamming between impeller and volute.
• Lower ball bearing and heavy-duty, type 6 seal for added
pump life.
HP 4/10
ME40
10
TOTAL HEAD IN FEET
30
Phase Single
25 8
ME4
Cord Length 10’ & 20’ 3.1 m & 6.1 m 0
20 6
Switch Options PT, T & M
15
Impeller Material Enclosed Cast Iron 4
10
Housing Material Cast Iron 5 2
14 See ordering table starting on page 53 for details on specific models. © 2019 Pentair plc. All Rights Reserved
EFFLUENT PUMPS
Cast Iron Submersible
Effluent Pump
• Bearings and mechanical seal permanently lubricated for long life.
• Vortex style impeller, pump out vanes for seal protection.
• Built-in thermal overload protection with automatic reset.
ME40-CI
HP 4/10
Maximum Capacity 61 GPM 231 LPM
Maximum Shut-off Head 40’ 12.2 m
Discharge 2” 50.8 mm
CAPACITY LITERS PER MINUTE Solids Handling 3/4” 19.0 mm
0 50 100 150 200 250
40 12 Voltage 115
35 Full Load Amps 9.7
TOTAL HEAD IN METERS
ME 10
TOTAL HEAD IN FEET
40-
30 CI Phase Single
4/1
0H 8
25 P
Cord Length 20’ & 30’ 6.1 m & 9.1 m
20 6
Switch Options PT & M
15
4
Impeller Material Recessed Vortex Reinforced Thermoplastic
10
5
2 Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 10 20 30 40 50 60 70
CAPACITY GALLONS PER MINUTE Warranty Years 3
See ordering table starting on page 53 for details on specific models.
HP 1/2
Maximum Capacity 87 GPM 329 LPM ME45
Maximum Shut-off Head 44’ 13.4 m
Discharge 2” 50.8 mm
CAPACITY LITERS PER MINUTE Solids Handling 3/4” 19.0 mm
0 50 100 150 200 250 300
50 15 Voltage 115 & 230
Full Load Amps See page 54 for details
TOTAL HEAD IN METERS
40 12
TOTAL HEAD IN FEET
Phase Single
30 ME4
5
9 Cord Length 20’, 30’ & 50’ 6.1 m, 9.1 m & 15.2 m
20 6
Switch Options PT & M
Impeller Material Two Vane Cast Iron
10 3
Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 10 20 30 40 50 60 70 80 90
CAPACITY GALLONS PER MINUTE Warranty Years 3
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 54 for details on specific models. 15
EFFLUENT SERIES
Cast Iron Submersible
Effluent Pump
• Bearings and mechanical seal permanently lubricated for long life.
• Serviceability – Heavy-duty lift-out ring, field serviceable.
• Built-in thermal overload protection with automatic reset.
• Silicon carbide seal for durability.
HP 1/2
ME7
HP 1/2 & 1
Maximum Capacity 138 GPM 522 LPM
Maximum Shut-off Head 64’ 19.5 m
Discharge 2” 50.8 mm
Solids Handling 3/4” 19.0 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400 500
Voltage 115, 200, 230, 460 & 575 80
20
TOTAL HEAD IN FEET
60
Phase Single & Three
MES
50 PD10
Cord Length 10’ & 20’ 3.1 m & 6.1 m 01H
P
40
Switch Options PD, PT & M 10
30 MES
PD5
Impeller Material Two-Vane Cast Iron 0 1/2
20 HP
Housing Material Cast Iron 10
Volute Material Cast Iron 0 0
0 20 40 60 80 100 120 140
Warranty Years 3 CAPACITY GALLONS PER MINUTE
16 See ordering table starting on page 54 for details on specific models. © 2019 Pentair plc. All Rights Reserved
EFFLUENT PUMPS
Submersible Pumps for Hazardous Environments
Classified as Class 1, Division 1, Group C and D
• Cable entry system provides double seal protection. Cable jacket
sealed by compression grommet. Individual wires sealed by epoxy
potting.
• Upper and lower ball bearings support shaft and rotor and take
axial and radial loads.
• Seal leak probes detect water in seal housing, activates warning
light in control panel.
• Required control panel sold separately.
HP 1/2, 1-1/2 & 2
SX
Maximum Capacity 95 GPM 360 LPM
Maximum Shut-off Head 70’ 21.3 m
Discharge 2” 50.8 mm
CAPACITY LITERS PER MINUTE Solids Handling 2” 50.8 mm
0 50 100 150 200 250 300 350
80 24 Voltage 200, 230, 460 & 575
70 SX20 Full Load Amps See page 54 for details
TOTAL HEAD IN METERS
0H, 2 20
HP
TOTAL HEAD IN FEET
60
16
Phase Single & Three
50 SX150
H, 1-1
/2 HP Cord Length 20’ 6.1 m
40 SX50H, 12
1/2 HP
30
Switch Options M (Manual)
8
20 Impeller Material Ductile Iron
SX50, 1/2 HP
10
4 Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 10 20 30 40 50 60 70 80 90 100
CAPACITY GALLONS PER MINUTE Warranty Years 3
See ordering table starting on page 54 for details on specific models.
80 ME15
TOTAL HEAD IN FEET
0 1-1/2 24
HP Phase Single & Three
ME1
00 1 20
60 HP
ME7
5 3/4
Cord Length 20’ 6.1 m
16
HP
40 12
Switch Options M (Manual)
ME5
0 1/2
HP
8 Impeller Material Enclosed Reinforced Thermoplastic or Bronze
20
4 Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 20 40 60 80 100 120
CAPACITY GALLONS PER MINUTE Warranty Years 3
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 54 for details on specific models. 17
EFFLUENT PUMPS
High Head Submersible Pump with Inlet
Designed for Better Solids Handling
• Carbon/Ceramic type 21 mechanical seal.
• Oil-filled motor with automatic reset thermal overload
for maximum protection (single phase models).
• Capacitor start for increased starting torque
(single phase models).
HP 1/2 & 1
MES
Effluent ST.E.P.
Pumps
• Single-vane, enclosed impeller provides steep, non-overloading
performance curve for pressure collection and ST.E.P. systems;
out-performs most pumps in its class.
• Double tandem seal configuration for extra motor protection,
tough effluent pumping applications.
• High-torque, permanent split capacitor (PSC), single-phase
motors; no starting switches or relays to wear out.
P50/P100
HP 1/2 & 1
Maximum Capacity 59 GPM 223 LPM
Maximum Shut-off Head 124’ 37.8 m
Discharge 1-1/2” 38.1 mm
Solids Handling 3/4” 19.0 mm CAPACITY LITERS PER MINUTE
25 50 75 100 125 150 175 200 225
Voltage 115 & 230 140
40
Full Load Amps See page 56 for details 120 P100 36
TOTAL HEAD IN METERS
1 HP
TOTAL HEAD IN FEET
32
Phase Single 100
28
Cord Length 20’ 6.1 m 80 P50 1/2 24
HP 20
Switch Options M (Manual) 60
16
Impeller Material Enclosed Reinforced Thermoplastic or Bronze 40 12
8
Housing Material Cast Iron 20
4
Volute Material Cast Iron 0 0
0 10 20 30 40 50 60
Warranty Years 3 CAPACITY GALLONS PER MINUTE
18 See ordering table starting on page 56 for details on specific models. © 2019 Pentair plc. All Rights Reserved
EFFLUENT PUMPS
Stainless Steel Submersible Effluent Pump
• Stainless steel housing and volute case resist corrosion and
withstand the harshest conditions and will provide years of service.
• High-torque, permanent split capacitor (PSC) motor; no relays or
starting switches to wear out.
• Impeller is designed for self-cleaning and effectively handles
solids up to 1-1/2” in diameter.
HP 4/10 & 1/2
Maximum Capacity 97 GPM 367 LPM
Maximum Shut-off Head 36’ 10.9 m
DE
Discharge 2” 50.8 mm
Solids Handling 1-1/2” 38.1 mm
50 15 Single
TOTAL HEAD IN FEET
30 9 Switch Options PT
DE5
0 1/2
20 DE4 HP
6 Impeller Material Thermoplastic
0 4/
10 H
P
10 3
Housing Material Stainless Steel
Volute Material Stainless Steel
0 0
0 20 40 60 80 100
CAPACITY GALLONS PER MINUTE Warranty Years 3
HP 1/2
Maximum Capacity 35 GPM 132 LPM MD
Maximum Shut-off Head 225’ 68.6 m
Discharge 1-1/4” 31.8 mm
CAPACITY LITERS PER MINUTE Solids Handling 8/10” 20.3 mm
0 25 50 75 100
300 Voltage 115
80 Full Load Amps See page 56 for details
TOTAL HEAD IN METERS
TOTAL HEAD IN FEET
225 10
GP Phase Single
M 60
1/
2H
P Cord Length 10’ 3.1 m
150
40 Switch Options M (Manual)
75
Impeller Material Enclosed Thermoplastic
30 G 20
20 PM
1/2 GPM 1/2
HP Housing Material Stainless Steel and Composite
HP
0 Volute Material Stainless Steel and Composite
0 10 20 30 40 50
CAPACITY GALLONS PER MINUTE Warranty Years 1
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 56 for details on specific models. 19
EFFLUENT PUMPS
High Head Filtered
Effluent Pump
• Corrosion-resistant design for long life.
2NFL J-BE
• Cost-effective wastewater systems.
• Built-in overload protection.
2NFL & J-BE
100 30 100 30
0 0
0 2 4 6 8 10 12 14 16 18 20 0 3 6 9 12 15 18 21 24 27 30
CAPACITY GALLONS PER MINUTE CAPACITY GALLONS PER MINUTE
1/2 HP
100 30 50 15
0 0
0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 35 40 45 50
CAPACITY GALLONS PER MINUTE CAPACITY GALLONS PER MINUTE
20 See ordering table starting on page 56 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PUMPS
See ordering table starting on pages 56-61 for details on specific models.
© 2019 Pentair plc. All Rights Reserved See ordering table starting on pages 56-61 for details on specific models. 21
SEWAGE PUMPS
Cast Iron Submersible
Sewage Pump
• Power for versatile residential septic tank applications.
• Rotary shaft seal has carbon and ceramic faces for positive seal.
• Thermal overload protection with automatic reset.
HP 4/10
SRM4
HP 1/2
Maximum Capacity 145 GPM 549 LPM
Maximum Shut-off Head 22’ 6.7 m
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400 500 600
Voltage 115 & 230 25
7
Full Load Amps See page 56 for details
TOTAL HEAD IN METERS
6
TOTAL HEAD IN FEET
20
Phase Single MSE 5
50 1
15 /2 H
Cord Length 10’ & 20’ 3.1 m & 6.1 m P 4
22 See ordering table starting on page 56 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PUMPS
Submersible Sewage Pump Designed to Handle
Wastewater and Sewage in Residential Applications
• Carbon/Ceramic type 21 mechanical seal.
• Oil-filled motor with automatic reset thermal overload for
maximum protection (single phase models).
• Upper and lower single-row ball-bearing construction.
MSP40
HP 4/10
Maximum Capacity 130 GPM 492 LPM
Maximum Shut-off Head 26’ 7.9 m
Discharge 2” 50.8 mm
CAPACITY LITERS PER MINUTE Solids Handling 1-1/2” 38.1 mm
0 100 200 300 400 500
30 Voltage 115 & 230
8
Full Load Amps See pages 56 & 57 for details
TOTAL HEAD IN METERS
25
TOTAL HEAD IN FEET
MSP50
HP 1/2
Maximum Capacity 148 GPM 560 LPM
Maximum Shut-off Head 28’ 8.5 m
Discharge 2” or 3” 50.8 mm or 76.2 mm
CAPACITY LITERS PER MINUTE Solids Handling 1-1/2” 38.1 mm
0 100 200 300 400 500
40 12 Voltage 115, 200, 230, 460 & 575
35 Full Load Amps See page 57 for details
TOTAL HEAD IN METERS
10
TOTAL HEAD IN FEET
5
2 Housing Material Cast Iron or Bronze
0 0 Volute Material Cast Iron or Bronze
0 20 40 60 80 100 120 140
CAPACITY GALLONS PER MINUTE Warranty Years 3
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 57 for details on specific models. 23
SEWAGE PUMPS
Cast Iron Submersible
Sewage Pump
• Positive sealing, quick- connect float and switch cords make
replacement simple if service is ever necessary.
• Enclosed design for high- efficiency pumping eliminates possibility
of jamming between impeller and volute.
• Lower ball bearing and heavy-duty, type 6 seal for added pump life.
MWS5
HP 1/2
Maximum Capacity 130 GPM 492 LPM
Maximum Shut-off Head 18’ 5.5 m
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400 500
6
Voltage 115 20
10
TOTAL HEAD IN FEET
30
Phase Single MW
S377 8
25 5, 3/
Cord Length 20’ 6.1 m 4 HP
20 MW 6
Switch Options PT & M S375
0, 1/
15 2 HP
4
Impeller Material Recessed Vortex Cast Iron
10
Housing Material Cast Iron 5
2
24 See ordering table starting on page 57 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PUMPS
Cast Iron Submersible
Sewage Pumps
• Dual Shaft Seals – Primary mechanical seal with a secondary
self-lubricating lip seal.
• Overload Protection – Built-in thermal overload with automatic
reset on single phase.
• Impeller – Non-clog vortex style, pump out vanes for
seal protection.
MWS9
HP 1, 1-1/2 & 2
Maximum Capacity 237 GPM 890 LPM
Maximum Shut-off Head 53’ 16.1 m
Discharge 2” or 3” 50.8 mm or 76.2 mm
CAPACITY LITERS PER MINUTE Solids Handling 2” 50.8 mm
0 100 200 300 400 500 600 700 800 900
60
MWS Voltage 230, 460 & 575
92, 2 16
HP
Full Load Amps See page 57 for details
TOTAL HEAD IN METERS
50
TOTAL HEAD IN FEET
MWS91
5, 1-1/2
HP 12 Phase Single & Three
40
MWS91,
1 HP Cord Length 20’ 6.1 m
30 8
Switch Options PT & M
20
4 Impeller Material Two-Vane Cast Iron
10
Housing Material Cast Iron
0
0 Volute Material Cast Iron
0 50 100 150 200 250
CAPACITY GALLONS PER MINUTE Warranty Years 3
See ordering table starting on page 57 for details on specific models.
HP 1/2
Maximum Capacity
Maximum Shut-off Head
87 GPM
19’
329 LPM
5.8 m
CMV5
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm
CAPACITY LITERS PER MINUTE Voltage 115
0 50 100 150 200 250 300 350
20 6
Full Load Amps 12.0
Phase Single
TOTAL HEAD IN METERS
5
TOTAL HEAD IN FEET
15
CM
V5 4 Cord Length 20’ 6.1 m
1/2
HP
Switch Options T&M
10 3
Impeller Material Recessed Vortex Thermoplastic
2
5 Housing Material Cast Iron & Thermoplastic
1
Volute Material Thermoplastic
0 0 Warranty Years 3
0 20 40 60 80 100
CAPACITY GALLONS PER MINUTE
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 57 for details on specific models. 25
SEWAGE PUMPS
Residential and Light Commercial
Sewage Pump
• Enclosed design for high-efficiency pumping.
• High-torque, permanent split capacitor (PSC) motors; no starting
switches or relays to wear out.
• Lower ball bearing eliminates sleeve bearing wear and
significantly reduces motor wear.
MW50
HP 1/2
Maximum Capacity 135 GPM 511 LPM
Maximum Shut-off Head 27’ 8.2 m
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400 500
30 10
Voltage 115 & 230
Full Load Amps See page 57 for details
HP 1/2
Maximum Capacity 189 GPM 715 LPM
Maximum Shut-off Head 22’ 6.7 m
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400 500 600
Voltage 115 & 230 25
20 6
TOTAL HEAD IN FEET
MSKV50 1/2 HP
Phase Single
Cord Length 10’ & 20’ 3.1 m & 6.1 m 15
4
Switch Options PT, PD & M 10
Impeller Material Recessed Vortex Thermoplastic 2
5
Housing Material Cast Iron
Volute Material Cast Iron 0 0
0 20 40 60 80 100 120 140 160 180 200
Warranty Years 3 CAPACITY GALLONS PER MINUTE
26 See ordering table starting on page 57 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PUMPS
Submersible Sewage Pump Designed to Meet the Demands
of Residential Wastewater and Sewage Applications
• Carbon/Ceramic type 21 mechanical seal.
• Oil-filled motor with automatic reset thermal overload for
maximum protection.
• Upper and lower single-row ball-bearing construction.
• Available in 3” discharge, adapter sold separately #513520137.
MSK50
HP 1/2
Maximum Capacity 107 GPM 405 LPM
Maximum Shut-off Head 24’ 7.3 m
Discharge 2” or 3” 50.8 mm or 76.2 mm
CAPACITY LITERS PER MINUTE Solids Handling 2” 50.8 mm
0 100 200 300 400
30 Voltage 115 & 230
8 Full Load Amps See page 57 for details
TOTAL HEAD IN METERS
25
TOTAL HEAD IN FEET
Phase Single
20 6
MSK5
0 1/2 Cord Length 10’ & 20’ 3.1 m & 6.1 m
15 HP
4 Switch Options PT & M
10
Impeller Material Two-vane Cast Iron
2
5 Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 20 40 60 80 100 120
CAPACITY GALLONS PER MINUTE Warranty Years 3
See ordering table starting on page 57 for details on specific models.
MSK60
HP 6/10
Maximum Capacity 124 GPM 469 LPM
Maximum Shut-off Head 28’ 8.5 m
Discharge 2’ or 3” 50.8 mm or 76.2 mm
Solids Handling 2” 50.8 mm
CAPACITY LITERS PER MINUTE
0 100 200 300 400 500 Voltage 115, 200, 230, 460 & 575
30
8 Full Load Amps See pages 57 & 58 for details
TOTAL HEAD IN METERS
25
Phase
TOTAL HEAD IN FEET
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 57 for details on specific models. 27
SEWAGE PUMPS
Submersible Sewage Pump Designed to Meet the
Demands of Wastewater and Sewage Applications
• Carbon/Ceramic type 21 mechanical seal.
• Oil-filled motor with automatic reset thermal overload for
maximum protection.
• Upper and lower single-row ball-bearing construction.
• Available in 3” discharge, adapter sold separately #513520137.
MSK75
HP 3/4
Maximum Capacity 150 GPM 568 LPM
Maximum Shut-off Head 33’ 10.1 m
Discharge 2” or 3” 50.8 mm or 76.2 mm
Solids Handling 2” 50.8 mm
Voltage 200, 230, 460 & 575 CAPACITY LITERS PER MINUTE
0 100 200 300 400 500 600
Full Load Amps See page 58 for details 40 12
Warranty Years 3 0 0
0 20 40 60 80 100 120 140 160
See ordering table starting on page 58 for details on specific models. CAPACITY GALLONS PER MINUTE
HP 1
Maximum Capacity 157 GPM 594 LPM
Maximum Shut-off Head 37’ 11.3 m
Discharge 2” or 3” 50.8 mm or 76.2 mm
Solids Handling 2” 50.8 mm CAPACITY LITERS PER MINUTE
0 100 200 300 400 500
Voltage 200, 230, 460 & 575 40 12
35
Full Load Amps See page 58 for details
TOTAL HEAD IN METERS
10
TOTAL HEAD IN FEET
30
Phase Single & Three 8
25 MSK10
0 1 HP
Cord Length 20’ 6.1 m
20 6
Switch Options M
15
4
Impeller Material Two-vane Cast Iron 10
Housing Material Cast Iron 5
2
28 See ordering table starting on page 58 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PUMPS
Submersible Sewage Pump Specifically Designed to Meet the Demands of Wastewater
and Sewage Handling in Residential and Commercial Building Applications
• Carbon/Ceramic type 21mechanical seal.
• Oil-filled motor with automatic reset thermal overload for
maximum protection (single phase models).
• Upper and lower single-row ball-bearing construction.
• Available in 3” discharge, adapter sold separately #513520137.
MSKHS
HP 1/2, 1, 1-1/2 & 2
Maximum Capacity 175 GPM 662 LPM
Maximum Shut-off Head 80’ 24.4 m
Discharge 2” or 3” 50.8 mm or 76.2 mmm
CAPACITY LITERS PER MINUTE Solids Handling 2” 50.8 mm
0 100 200 300 400 500 600
80 24
75 Voltage 115, 200, 230, 460 & 575
70 MSKHS
200, 2 H
Full Load Amps See pages 58 & 59 for details
TOTAL HEAD IN METERS
65 P 20
TOTAL HEAD IN FEET
MSKH
60 S150,
1-1/2
55 HP 16 Phase Single & Three
50 MSK
HS10
45 0, 1 H
P
Cord Length 20’ & 30’ 6.1 m & 9.1 m
40 12
35
30 MSKHS
Switch Options PT & M
25 50, 1/2 8
HP
20 Impeller Material Two-vane Cast Iron
15 4
10 Housing Material Cast Iron
5
0 0 Volute Material Cast Iron
0 20 40 60 80 100 120 140 160
CAPACITY GALLONS PER MINUTE Warranty Years 3
See ordering table starting on page 58 for details on specific models.
20
TOTAL HEAD IN FEET
MW20
60 0 2 HP
Phase Single & Three
MW15 15
0 1-1/2 Cord Length 20’ 6.1 m
40 HP
MW10 10 Switch Options PT & M
0 1 HP
20
MWH5
0 1/2 H Impeller Material Two-vane Enclosed Ductile Iron
P 5
Housing Material Cast Iron
0 0 Volute Material Cast Iron
0 20 40 60 80 100 120 140 160 180
CAPACITY GALLONS PER MINUTE Warranty Years 3
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 59 for details on specific models. 29
SEWAGE PUMPS
2” Solids Handling Heavy-Duty Residential and Commercial
Sewage Pumps Available with Single or Double Seals
• Thermal overload protection with automatic reset.
• Recessed impeller and high capacity fluid transfer are perfect
for domestic wastewater, septic systems and light commercial
sewage applications.
• Oil-filled for cooler operation and constant bearing lubrication.
• Available in 3” discharge, adapter sold separately #FR-300.
20
TOTAL HEAD IN FEET
60 WHR
20H
Phase Single & Three WHR
,2H
P 4
15H .56” 15
, 1-1 IMP
Cord Length 20’ 6.1 m WH
R10 /2 H ELL
ER T
40 H, 1 P 4 RIM
WHR .13”
Switch Options M (Manual) 5H, 1
/2 H
HP
3.88
IMP
ELL 10
P 3.2 ” IM ER T
5” IM PEL RIM
Impeller Material Recessed Vortex Ductile Iron Vortex 20
PEL
LER LER
TRI
TRIM M 5
Housing Material Cast Iron
Volute Material Cast Iron 0
0 20 40 60 80 100 120 140 160 180 200 220
Warranty Years 3 CAPACITY GALLONS PER MINUTE
30 See ordering table starting on page 60 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PACKAGES
2” Solids Handling Continuous Duty
Stainless Steel Sewage Pumps
• Silicon carbide or carbon ceramic mechanical seals.
• Stainless steel, corrosion-resistant shaft and hardware.
• Oil-cooled and lubricated, continuous-duty PSC motors.
DSW
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm
Voltage 115 & 230
CAPACITY LITERS PER MINUTE
0 100 200 300 400 500 600 Full Load Amps See page 61 for details
40 12
Phase Single
35
TOTAL HEAD IN METERS
DSW
30 100 9
1H
25
P Switch Options PT & M
DSW
50 1
20 /2 H 6 Impeller Type Vortex Impeller
P
DS
15 W4
04 Impeller Material Stainless Steel
/10
10 HP 3
Housing Material Stainless Steel
5
Volute Material Stainless Steel
0 0
0 20 40 60 80 100 120 140 160 Warranty Years 3
CAPACITY GALLONS PER MINUTE
SB24SRM
HP 4/10
Maximum Capacity 90 GPM 341 LPM
Pump Only Maximum Shut-off Head 19’ 5.8 m
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm
Voltage 115
CAPACITY LITERS PER MINUTE Full Load Amps 12.0
40 80 120 160 200 240 280 320 360 Phase Single
25
7
Cord Length 20’ 6.1 m
TOTAL HEAD IN METERS
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 61 for details on specific models. 31
SEWAGE PACKAGES
24”x24” Pre-plumbed Packaged Sewage
System, Includes 1/2 HP MW50 Pump
• Fully assembled basin package includes high performing MW50
sewage pump, 2” PVC discharge pipe, float tree and tethered
switch, an easy access lid and a high capacity durable basin.
• Basin features molded torque stops to keep pump in place and
pads on the bottom to easily place in tough soil.
• Thick molded walls and seamless inlet hub prevent leaking.
Multiple side panels allow you to add additional inlets.
SB24MW50
HP 1/2
Maximum Capacity 135 GPM 511 LPM
Maximum Shut-off Head 27’ 8.2 m Pump Only
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm
Voltage 115
Full Load Amps 9.0 CAPACITY LITERS PER MINUTE
0 100 200 300 400 500
Phase Single 30 10
Cord Length 20 6.1 m
24” W x 24” H
Basin Dimensions 2
609 mm W x 609 mm H 5
Basin Capacity 38.5 Gallons 145.7 Liters
0 0
Lid Material Polyethylene 0 20 40 60 80 100 120 140
Warranty Years 3 CAPACITY GALLONS PER MINUTE
See ordering table starting on page 61 for details on specific models.
HP 4/10
SR1830
Switch Options
TOTAL HEAD IN METERS
PT (Piggy-Back Tethered) 20 6
TOTAL HEAD IN FEET
18” W x 30” H 2
Basin Dimensions
457 mm W x 762 mm H 5
1
Basin Capacity 30 Gallons 113.6 Liters
0
Lid Material Polyethylene 0 10 20 30 40 50 60 70 80 90
Warranty Years 3 CAPACITY GALLONS PER MINUTE
32 See ordering table starting on page 52 for details on specific models. © 2019 Pentair plc. All Rights Reserved
SEWAGE PACKAGES
Packaged Sewage Ejector System,
Includes 1/2 HP CMV5 Pump
• High-quality system includes CMV5 sewage pump, structural foam
lid, 2” discharge pipe and 2”full swing check valve.
• Pre-plumbed package comes fully assembled and ready to install.
• Oil-filled motor for maximum heat dissipation and continuous
bearing lubrication.
CMV1830
HP 1/2
Maximum Capacity 87 GPM 329 LPM
Pump Only Maximum Shut-off Head 19’ 5.8 m
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm
Voltage 115
CAPACITY LITERS PER MINUTE Full Load Amps 12.0
0 50 100 150 200 250 300 350
20 6 Phase Single
Cord Length 20’ 6.1 m
TOTAL HEAD IN METERS
15
CM 4
Impeller Material Recessed Vortex Thermoplastic
V5
1/2
HP Housing Material Cast Iron & Thermoplastic
10 3 Volute Material Thermoplastic
Basin Material Polyethylene
2
18” W x 30” H
5 Basin Dimensions
1 457 mm W x 762 mm H
Basin Capacity 30 Gallons 113.6 Liters
0 0
0 20 40 60 80 100 Lid Material Polyethylene
CAPACITY GALLONS PER MINUTE Warranty Years 3
See ordering table starting on page 61 for details on specific models.
HP 1/2
Pump Only
Maximum Capacity
Maximum Shut-off Head
189 GPM
22’
715 LPM
6.7 m M224A
Discharge 2” 50.8 mm
Solids Handling 2” 50.8 mm
Voltage 115
CAPACITY LITERS PER MINUTE Full Load Amps 12.0
0 100 200 300 400 500 600
25 Phase Single
Cord Length 10’ 3.1 m
TOTAL HEAD IN METERS
6
20 Switch Options PT (Piggy-Back Tethered)
TOTAL HEAD IN FEET
MSKV50 1/2 HP
Impeller Material Recessed Vortex Thermoplastic
15
4 Housing Material Cast Iron
Volute Material Cast Iron
10
Basin Material Polyethylene
2 24” W x 32” H
5 Basin Dimensions
609 mm W x 812 mm H
Basin Capacity 40 Gallons 151.4 Liters
0 0
0 20 40 60 80 100 120 140 160 180 200 Lid Material Steel
CAPACITY GALLONS PER MINUTE Warranty Years 3
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 61 for details on specific models. 33
GRINDER PUMPS
Residential or Commercial
Submersible Grinder Pump
• Heat Sensor protects motor from burnout due to excessive heat from
any overload condition. Automatically resets when motor has cooled.
• Cable Entry System – cable jacket sealed by compression fitting
and individual wires sealed by compression grommet for double
seal protection against water ingress.
• Stainless steel Shaft and Fasteners for maximum corrosion
resistance and long life.
HP 1
VRS10
Phase Single 20
TOTAL HEAD IN FEET
60
Cord Length 20’ 6.1 m
15
Switch Options PT & M 40 VRS
10
10
Impeller Material Thermoplastic
Cutter Material Stainless Steel 20
5
Housing Material Cast Iron
0 0
Volute Material Cast Iron 0 10 20 30 40 50 60
CAPACITY GALLONS PER MINUTE
Warranty Years See Warranty Page for Details
34 See ordering table starting on page 61 for details on specific models. © 2019 Pentair plc. All Rights Reserved
GRINDER PUMPS
Residential or Commercial
Submersible Grinder Pump
• Heat Sensor protects motor from burnout due to excessive heat from
any overload condition. Automatically resets when motor has cooled.
• Cable Entry System – cable jacket sealed by compression fitting
and individual wires sealed by compression grommet for double
seal protection against water ingress.
• Stainless steel Shaft and Fasteners for maximum corrosion
resistance and long life.
HP 2
VRS20
Maximum Capacity 59.5 GPM 225.2 LPM
Maximum Shut-off Head 160 ft. 48.8 m
Discharge 1-1/4” 31.8 mm
Solids Handling – –
CAPACITY LITERS PER MINUTE
50 100 150 Voltage 230
180
160
Full Load Amps 15.0
TOTAL HEAD IN METERS
VRH 45
20 Phase Single
TOTAL HEAD IN FEET
140
40
120 VRS2
0
35 Cord Length 20’ 6.1 m
100 30
Switch Options PT & M
80 VRF20 25
60
20 Impeller Material Stainless Steel
15
40 Cutter Material Stainless Steel
10
20 5 Housing Material Cast Iron
0 0
0 10 20 30 40 50 60 Volute Material Cast Iron
CAPACITY GALLONS PER MINUTE
Warranty Years See Warranty Page for Details
Refer to factory for VRS20 applications below dotted line See ordering table starting on page 61 for details on specific models.
SB24VRS10
HP 1
Maximum Capacity 52 GPM 196.8 LPM
Maximum Shut-off Head 60 ft. 18.3 m
Discharge 2” 50.8 mm
Pump Only Solids Handling – –
Voltage 115 & 230
Full Load Amps 7 / 13
CAPACITY LITERS PER MINUTE Phase Single
0 50 100 150 200
80 Cord Length 20’ 6.1 m
Switch Options PRE-T (Pre-Mounted Tethered)
TOTAL HEAD IN METERS
20
TOTAL HEAD IN FEET
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 61 for details on specific models. 35
GRINDER PACKAGES
Completely Pre-Engineered, Pre-Packaged,
Pre-Assembled Systems Ready for Installation
• Two SDR-35 inlet hubs and Sch. 40 adapters, NEMA 4X junction
box and alarm float switch.
• Quick-disconnect rail system with stainless steel rails, check valve
and ball valve.
• Easy installation – installer only has to excavate, secure, connect
discharge lines, locate and mount inlet hub, locate and mount
panel, install pump in basin and connect electrical wiring.
VRS20
HP 2
Maximum Capacity 31 GPM 117 LPM
Maximum Shut-off Head 138 ft. 42.1 m
Discharge 1-1/4” 31.8 mm
Solids Handling – –
Voltage 230
Full Load Amps 15.0
Phase Single
Cord Length 20’ 6.1 m
Switch Options PRE-T (Pre-Mounted Tethered)
Impeller Material Stainless Steel
Housing Material Cast Iron
Volute Material Cast Iron Basin Dimensions
Basin Material Fiberglass 24” x 60” 24” x 72” 24” x 84” 24” x 96”
Basin Capacity 38.5 Gallons 145.7 Liters
609 mm x 609 mm x 609 mm x 609 mm x
Lid Material Polypropylene 1524 mm 1829 mm 2133 mm 2438 mm
Warranty Years See Warranty Page for Details
36 See ordering table starting on page 61 for details on specific models. © 2019 Pentair plc. All Rights Reserved
WASTEWATER PUMPS
MS3S/MSB3S
HP 2&3
Maximum Capacity 335 GPM 1268 LPM
Maximum Shut-off Head 40’ 12.2 m
Discharge 3” 76.2 mm
Solids Handling 2-1/2” 63.5 mm
200 400 600 800 1000 1200 1400 1600
70
20 Voltage 200, 230, 460 & 575
60 20%
30% Full Load Amps See page 61 for details
TOTAL HEAD IN FEET
40%
50 45%
15
6.13"
50%
55% Phase Single & Three
40
Cord Length
5.88"
5.69"
55% 10 35’ 10.7 m
30 5.25"
50% Switch Options M (Manual)
20
4.75"
45%
5
10
Impeller Material Cast Iron
Housing Material Cast Iron
2 bhp 3 bhp
0 0
Volute Material Cast Iron
25 75 125 175 225 275 325 375 425
1750 RPM CAPACITY GALLONS PER MINUTE Warranty Years See warranty page for details
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 61 for details on specific models. 37
WASTEWATER PUMPS
Submersible Sewage Dual Seal Pumps for
Commercial Wastewater Applications
• Semi-open, two-vane sewage type impellers have pump-out vanes
on back shrouds to prevent stringy materials from building up MS3SD MSB3SD
Shown Shown
around shaft and seal.
• Oil-filled motor for cooler operation, longer life and less
maintenance; the dielectric oil effectively dissipates heat and
lubricates upper and lower ball bearings.
• Quality double ball bearing, dual mechanical seal.
CAPACITY LITERS PER MINUTE
MS3SD/MSB3SD
0 100 200 300 400 500 600 700 800 900 1000
24
22
30%
16
5.88" 55%
5
5.69"
14
55% 4
12 5.25"
10 4.75"
50% 3
8
HP 1, 2 & 3 6 1 bhp
2
4
Maximum Capacity 385 GPM 1457 LPM 2
.75 bhp
1
20%
Phase Single & Three 50
6.50"
30%
40%
45%
16
6.13" 50%
55%
Cord Length 35’ 10.7 m 40 5.88"
5.69" 12
55%
Switch Options M (Manual) 30 5.25"
4.75" 50% 8
20
Impeller Material Ductile Iron 45%
4
10 3 bhp
0
Volute Material Cast Iron
0 25 75 125 175 225 275 325 375 400
Warranty Years See warranty page for details 1750 RPM CAPACITY GALLONS PER MINUTE
HP 3, 5 & 7-1/2
Maximum Capacity 590 GPM 2233 LPM
0 500 1000 1500 2000 2500
Maximum Shut-off Head 55’ 16.8 m 24
Discharge 4” 101.6 mm 80
20
Solids Handling 3-1/2” 88.9 mm 70 20%
TOTAL HEAD IN FEET
30%
Voltage
40%
200, 230, 460 & 575 60
7.38"
7.13"
50%
55%
16
Full Load Amps See page 62 for details 50 6.75"
60%
6.50" 12
Phase Single & Three 40 6.25" 60%
6.06"
30
Cord Length 35’ 10.7 m 55%
50%
8
20
Switch Options M (Manual) 4
10
7.5 bhp
38 See ordering table starting on page 62 for details on specific models. © 2019 Pentair plc. All Rights Reserved
WASTEWATER PUMPS
Submersible Sewage Dual Seal Pumps for
Commercial Wastewater Applications
• The mechanical dual seal is constructed with a ceramic stationary
face and a carbon rotating face for long service life.
MSB4SD MS4SD
Shown Shown
• The stainless steel shaft eliminates corrosion and fatigue to give
longer pump life; the minimum shaft overhang decreases deflection
and increases seal life.
• The fully enclosed oil-filled motor efficiently dissipates heat and locks
out moisture so you receive reliable pumping service.
CAPACITY LITERS PER MINUTE
MS4SD/MSB4SD
0 200 400 600 800 1000 1200 1400 1600
32
28 7.50"
50%
6.75" 55%
20 6.50" 60% 6
6.25"
16 6.06"
12 4
8
2 bhp HP 2, 3, 5 & 7-1/2
2
4 1 bhp
Maximum Capacity 618 GPM 2339 LPM
0 0 Maximum Shut-off Head 58’ 17.7 m
50 100 150 200 250 300 350 400 450
1150 RPM CAPACITY GALLONS PER MINUTE Discharge 4” 101.6 mm
CAPACITY LITERS PER MINUTE Solids Handling 3.5” 89 mm
0 500 1000 1500 2000 2500 3000
80 25 Voltage 200, 230, 460 & 575
70
Full Load Amps
20%
7.5"
See pages 62 & 63 for details
TOTAL HEAD IN METERS
30%
7.38" 20
60 40%
TOTAL HEAD IN FEET
7.13" 50%
50 6.75"
55%
60% Phase Single & Three
6.50"
15
40 6.25"
60% Cord Length 35’ 10.7 m
6.06"
10
30 55%
50%
Switch Options M (Manual)
20
7.5 bhp
5 Impeller Material Ductile Iron
10
0
5 bhp
Housing Material Cast Iron
3 bhp 0
Volute Material Cast Iron
0 100 200 300 400 500 600 700 800
1750 RPM CAPACITY GALLONS PER MINUTE Warranty Years See warranty page for details
3450 RPM
50 15
40 12
30 9
HP 1, 1-1/2, 2 & 3 6
20
1750 RPM
Maximum Capacity 330 GPM 1249 LPM 10 3
Solids Handling 2” & 2-1/2” 50.8 mm & 63.5 mm CAPACITY LITERS PER MINUTE
0 75 150 225 300 375 450 525 600 675 750
Voltage 200, 230, 460 & 575 90 27
Full Load Amps See pages 63 & 64 for details 80 24
70 21
Phase Single & Three 3MW30
60 , 3 HP 18
Cord Length 20’ 6.1 m 50
3MW20
, 2 HP 15
3MW1
Switch Options M (Manual) 40 5, 1-1/
2 HP 12
3WHV
HP 1, 1-1/2, 2, 3 & 5
CAPACITY LITERS PER MINUTE Maximum Capacity 400 GPM 1514 LPM
60
0 500 1000 1500
18 Maximum Shut-off Head 48’ 14.6 m
16 Discharge 3” 76.2 mm
6-3/
P. D 14
IA. 3 Voltage 200, 230, 460 & 575
40 6- WHV 12
1/2 50 5
" IM
P. D
HP
10
Full Load Amps See pages 64 & 65 for details
6" IM IA . 3
30 P. D
IA. 3 WHV
30 3 8
Phase Single & Three
WH V HP
5-1/
2" I M 20 2
HP Cord Length 35’ 10.7 m
20 P. DIA 6
. 3WH
V15 1 Switch Options M (Manual)
-1/2 H 4
10 P Impeller Material Ductile Iron
2
Housing Material Cast Iron
0
0 100 200 300 400 500 Volute Material Cast Iron
CAPACITY GALLONS PER MINUTE Warranty Years See warranty page for details
Submersible Wastewater
Vortex Pumps
• Operates without vibration or cavitation over entire performance
curve; operates near shutoff without harming pump.
• Heat sensor thermostats embedded in windings protect motor from
overheat conditions.
• Oil-filled motor for maximum heat dissipation and constant bearing
lubrication.
12
TOTAL HEAD IN FEET
36
3RMW
6.00"
34%
5.50"
40% 10
30 44%
5.00" 46% 8
24 44%
18
3 hp
6
2 hp 40%
HP 1-1/2, 2 & 3
12 1.5 hp 4
Maximum Capacity 280 GPM 1060 LPM
6 2
Maximum Shut-off Head 51’ 15.6 m
0 0
40 80 120 160 200 240 280 320 360
Discharge 3” 76.2 mm
1750 RPM CAPACITY GALLONS PER MINUTE
Solids Handling 2” & 2-1/2” 50.8 mm & 63.5 mm
0 100 200 300 400 500 600 700 800 900
56
52 4.00" 16 Voltage 200, 230, 460 & 575
48
44
3.75"
34% 36% 14 Full Load Amps See pages 65 & 66 for details
TOTAL HEAD IN FEET
38%
40
Phase Single & Three
3.50"
12
36
38%
32 36% 10 Cord Length 20’ 6.1 m
28
8
24 Switch Options M (Manual)
20 6
16 3 hp
Impeller Material Ductile Iron
12 2 hp 4
8 1.5 hp
2
Housing Material Cast Iron
4
0 0 Volute Material Cast Iron
20 40 60 80 100 120 140 160 180 200 220 240 260
3450 RPM CAPACITY GALLONS PER MINUTE Warranty Years See warranty page for details
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 65 for details on specific models. 41
UTILITY PUMPS
Dewatering
Utility Pump
• High-output performance for removing unwanted water down
to 3/16” depth.
• Portable and versatile for use in window wells, basements,
rooftops, etc.
• Removable inlet screen for easy cleaning.
SPS-4
HP 1/4
Maximum Capacity 25 GPM 95 LPM
Maximum Shut-off Head 22’ 6.7 m
Discharge 1” 25.4 m
Solids Handling 1/8” 3.2 mm CAPACITY LITERS PER MINUTE
0 20 40 60 80 100
Voltage 115 25
7
Full Load Amps 8.8
Multi-purpose
Puddle Scoop Pump
• Ideal for transferring water, filling tanks and draining shallow
flooded areas
• Removes standing water down to 1/8” depth
• Air-cooled, high-torque, non-submersible motor with overload
protection
MES106
HP 1/12
Maximum Capacity 6 GPM 22.7 LPM
Maximum Shut-off Head 43’ 13.1 m
Discharge 3/4” Garden Hose 19.1 mm Garden Hose
Solids Handling – – CAPACITY LITERS PER MINUTE
0 5 10 15 20
Voltage 115 45 12
40
Full Load Amps 2.0
TOTAL HEAD IN METERS
10
TOTAL HEAD IN FEET
35
Phase Single
30 ME 8
S1
Cord Length 6' 1.8 m 25
06
1/1
2H 6
Switch Options M (Manual) 20 P
15 4
Impeller Material Open Flexible Synthetic Rubber
10
Housing Material Thermoplastic 5
2
42 See ordering table starting on page 66 for details on specific models. © 2019 Pentair plc. All Rights Reserved
UTILITY PUMPS
Utility
Sink Pump
• Ideal for basement wet bars, laundry and utility sinks.
• Quiet, trouble-free operation - easily mounts beneath your sink.
Designed to be used with a sink where gravity drain line is not
available.
• Includes pump assembly, one-way valve, discharge shut-off/flow
balancing valve, strainer cup.
MUSP125
HP 1/3
Maximum Capacity 40 GPM 151 LPM
Maximum Shut-off Head 14’ 4.3 m
Discharge 1-1/4” 31.8 m
CAPACITY LITERS PER MINUTE Solids Handling 1/8” 3.2 mm
0 25 50 75 100 125 150
15 Voltage 115
4
Full Load Amps 4.0
TOTAL HEAD IN METERS
TOTAL HEAD IN FEET
MU
SP1 3 Phase Single
10 25 1
/3 H Cord Length 8’ 2.4 m
P
2
Switch Options A (Automatic)
5
Impeller Material Open Thermoplastic
1
Housing Material Thermoplastic
0 0 Volute Material Thermoplastic
0 5 10 15 20 25 30 35 40
CAPACITY GALLONS PER MINUTE Warranty Years 1
Stainless Steel
Utility Pump
• Used for dewatering shallow flooded areas such as basements,
window wells, rooftops, ponds and stock tanks.
• Pumps standing water down to 1/8”.
• Includes 1”x 3/4” garden hose adapter.
DU25M1
HP 1/4
Maximum Capacity 19 GPM 72 LPM
Maximum Shut-off Head 23’ 7.0 m
Discharge 1-1/4” 31.7 m
CAPACITY LITERS PER MINUTE Solids Handling 1/8” 3.2 mm
0 10 20 30 40 50 60 70
25 Voltage 115
Full Load Amps 2.5
TOTAL HEAD IN METERS
20
TOTAL HEAD IN FEET
6
Phase Single
DU2
15 5M1
1/4
HP
Cord Length 15’ 4.6 m
10 Switch Options M (Manual)
3
Impeller Material Semi open Thermoplastic
5
Housing Material Stainless Steel
0 0 Volute Material Stainless Steel
0 5 10 15 20
CAPACITY GALLONS PER MINUTE Warranty Years 1
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 66 for details on specific models. 43
UTILITY PUMPS
Pentair Pro-Source Pumper Engine-Driven
®
Self-Priming Pump
• Excellent for floodwater removal without electricity.
• Lightweight portable unit.
• Manual throttle, choke, fuel valve and engine shut-off controls with
built-in check valve.
EDP55RV
HP 6-1/2
Maximum Capacity 134 GPM 507 LPM
Maximum Shut-off Head 135’ 41.1 m
CAPACITY LITERS PER MINUTE
Discharge 2” 50.8 mm 0 100 200 300 400 500
140
Solids Handling 2” 50.8 mm 40
120 EDP
0 0
0 20 40 60 80 100 120 140
CAPACITY GALLONS PER MINUTE
44 See ordering table starting on page 52 for details on specific models. © 2019 Pentair plc. All Rights Reserved
UTILITY PUMPS
Emergency Flood Kit for Quick Dewatering
and Easy Storage
Flood kit includes:
• Storage Crate / Filtering Cage - 15-3/4” (400mm) L x 11-13/16”
(300mm) W x 12-23/32” (323 mm) H carrying cage that can also be
used to filter large debris during dewatering.
• Hose - 25’ durable cloth hose is easy to attach with corrosion
resistant cam locks.
• Pump - High performance 4/10 HP thermoplastic utility pump can
draw water down to 7/16”.
MUFKP40
• 25’ replacement hose (# MHC25) and 4/10 HP replacement pump Pump Only
(# MUP40) sold separately.
HP 4/10
Maximum Capacity 41 GPM 155 LPM CAPACITY LITERS PER MINUTE
0 25 50 75 100 125 150
Maximum Shut-off Head 25’ 7.6 m 30 9
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 52 for details on specific models. 45
SPECIAL PURPOSE PUMPS
EPP Series
Pentair Pentek® Elevator Pump Control System
ME45 ME50
Model Description
EPC-115 Elevator Pump Control 115V Alarm
SSM33IM1C 1/3HP Sump Pump
ME45MC-11 1/2HP Effluent Pump
ME50S-11 1/2HP Effluent Pump
MES50M1 1/2HP Effluent Pump
EPP-MEOSP50M1 1/2HP Effluent Pump
*Suggested pump models are sold separately from EPC-115
SSM33I
MES50 MESOP50
FEATURES
The Pentair Pentek EPP Control Operation The control will also shut down the pump before
Series Elevator Pump On water rise, fluid level discharging harmful substances.
Control System is approved reaches pump “start” probe • Control panel with separate pump and control circuits,
for oil/water detection in to activate the pump. Pump NEMA 1 Enclosure;
applications where oil and remains on until fluid level 8.75”H x 6.5”W x 5”D
hydrocarbons are prohibited is below the “off” probe. The
from being released into the • Plug-in for quick
“off” probe senses air or and easy installation
environment. The system oil and turns the pump off
is designed to provide so the oil layer (if present) • Remote alarm
pumping, monitoring and will not be pumped out of • Multiple indicator lights: power on, pump run, high water,
alarm in garages, elevator the sump. If the liquid level and high oil indicators
sump pits, transformer reaches the“alarm” probe
vaults and substations. •O ne pre-set sensor for easy installation, no field
and mechanical float, the adjustment necessary
The elevator pump control system will differentiate
activates the pump for between water and oil and • UL and CSA listed
removal of water from activate the remote alarm.
elevator pits in accordance
with ASME17.1.
46 See ordering table starting on page 52 for details on specific models. © 2019 Pentair plc. All Rights Reserved
ACCESSORIES
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
FEATURES
© 2019 Pentair plc. All Rights Reserved See ordering table starting on page 52 for details on specific models. 47
ACCESSORIES
FEATURES
• Quality electrical (duplex) mercury switches • Indoor NEMA 1 panels • Transfer switch/generator
components assure (not included with panel) include standard high receptacle
reliable automatic pump • Corrosion resistant water alarm buzzer • Pump delay circuitry
operation for long life Wide range of panel • Low level cut-off and
• For 1/4 –7 HP sump, • Weathertight NEMA 4X options: alarm
sewage and effluent fiberglass enclosure with • Elapsed time meter
pumps • Phase loss circuitry
outdoor panels • Alarm horn with silence
• IEC horsepower-rated • Low voltage circuitry
• Indoor NEMA 1 panels switch
contactors (1Ø) and are enamel-coated Note:
motor starters (3Ø) • Auxiliary contacts
galvanized steel Additional options available
• 3Ø starters with • Condensation heater
• Meets NEC safety
ambient-compensated standards • Convenience outlet
quick-trip overloads • Intrinsically safe relays
• UL-508 approved panel
• Includes alternating designs • Lightning arrestor
and override relays to
maximize pump wear • Outdoor NEMA 4X panels • Full inner door
include standard high • Cycle counter
• Designed for use with water alarm light
off-on alarm (simplex) • 24V control circuitry
and off-on lag-alarm
Level Controls
FEATURES
Flexible Rubber Basins and Covers • IAPMO-approved • 24” x 36” and 30” x 48”
Inlet Hubs • Size range meets many • 18” x 30” polypropylene FRP fiberglass basins
• Available for 4” and 6” PVC pump applications basins; steel one- or • Steel cover with separate
pipe (Specify Schedule 40 • 18” x 30” structural foam two-piece covers; 2” or 3” simplex or duplex pump
or SDR 35) basins; cast iron or flexible discharge, 2” or 3” vent; covers; 2” or 3” discharge,
inlet hubs; one- or two- 4” cast iron or flexible 2” or 3” vent
piece structural foam inlet hubs
covers; 2” or 3” discharge,
2” or 3” vent
Controls
For use with Commercial Grinders and Vortex Pumps
FEATURES
SUMP PUMPS
MS(P) MS33PV10 - 1/3 53 24 1-1/2" 3/16" 115 3.9 1 10' PV
MS(P) MS33PT10 - 1/3 53 24 1-1/2" 3/16" 115 3.9 1 10' PT
MS(P) MS33PT20 - 1/3 53 24 1-1/2" 3/16" 115 3.9 1 20' PT
MS(P) MS33PV20 - 1/3 53 24 1-1/2" 3/16" 115 3.9 1 20' PV
MS(P) MS50PV10 - 1/2 63 24 1-1/2" 3/16" 115 4.1 1 10' PV
MS(P) MS50PT10 - 1/2 63 24 1-1/2" 3/16" 115 4.1 1 10' PT
MS(P) MS50PT20 - 1/2 63 24 1-1/2" 3/16" 115 4.1 1 20' PT
MS(P) MS50PV20 - 1/2 63 24 1-1/2" 3/16" 115 4.1 1 20' PV
MS MS33V10 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 10' PV
MS MS33V20 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 20' PV
MS MS33D10 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 10' PD
MS MS33D20 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 20' PD
MS MS33T10 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 10' PT
MS MS33T20 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 20' PT
MS MS33M20 - 1/3 53 25 1-1/2" 1/4" 115 3.9 1 20' M
MS MS50V10 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 10' PV
MS MS50V20 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 20' PV
MS MS50D10 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 10' PD
MS MS50D20 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 20' PD
MS MS50T10 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 10' PT
MS MS50T20 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 20' PT
MS MS50M20 - 1/2 66 25 1-1/2" 1/4" 115 4.1 1 20' M
MDC MDC33P1 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 10' PT
MDC MDC33V1 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 10' PV
MDC MDC33D1 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 10' PD
MDC MDC33V1 20 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 20' PV
MDC MDC33PC1 20 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 20' PT
MDC MDC33PC1 30 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 30' PT
MDC MDC33D1 20 - 1/3 47 23 1-1/2" 1/2" 115 9.8 1 20' PD
MDC MDC50P1 - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 10' PT
MDC MDC50V1 - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 10' PV
MDC MDC50D1 - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 10' PD
MDC MDC5010M - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 20' M
MDC MDC50PC1 - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 20' PT
MDC MDC50VC1 - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 20' PV
MDC MDC50D1 20 - 1/2 62 32 1-1/2" 1/2" 115 12.0 1 20' PD
MSCI MSCI33T10 - 1/3 71 22 1-1/2" 3/8" 115 6.9 1 10' PT
MSCI MSCI33V10 - 1/3 71 22 1-1/2" 3/8" 115 6.9 1 10' PV
MSCI MSCI33D10 - 1/3 71 22 1-1/2" 3/8" 115 6.9 1 10' PD
MSCI MSCI50V10 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 10' PV
MSCI MSCI50V20 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 20' PV
MSCI MSCI50V50 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 50' PV
MSCI MSCI50D10 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 10' PD
MSCI MSCI50D20 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 20' PD
MSCI MSCI50T10 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 10' PT
MSCI MSCI50T20 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 20' PT
MSCI MSCI50T50 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 50' PT
MSCI MSCI50M20 - 1/2 87 29 1-1/2" 3/8" 115 7.7 1 20' M
MCI0 MCI033 - 1/3 48 24 1-1/2" 1/2" 115 9.8 1 10' V
MCI0 MCI033 20 - 1/3 48 24 1-1/2" 1/2" 115 9.8 1 20' V
MCI0 MCI033 30 - 1/3 48 24 1-1/2" 1/2" 115 9.8 1 30' V
MCI0 MCI033M 20 - 1/3 48 24 1-1/2" 1/2" 115 9.8 1 20' M
MCI0 MCI033M 30 - 1/3 48 24 1-1/2" 1/2" 115 9.8 1 30' M
MCI0 MCI050 - 1/2 63 32 1-1/2" 1/2" 115 12.0 1 10' V
MCI0 MCI050 20 - 1/2 63 32 1-1/2" 1/2" 115 12.0 1 20' V
MCI0 MCI050 30 - 1/2 63 32 1-1/2" 1/2" 115 12.0 1 30' V
MCI0 MCI050M 20 - 1/2 63 32 1-1/2" 1/2" 115 12.0 1 20' M
MCI0 MCI050M 30 - 1/2 63 32 1-1/2" 1/2" 115 12.0 1 30' M
SSM33I SSM33IM1C 26235D100 1/3 32 23 1-1/2" 1/2" 115 9.0 1 20' M
SSM33I SSM33IP-1 26235D110 1/3 32 23 1-1/2" 1/2" 115 9.0 1 10' PT
SSM33I SSM33IPC-1 26235D111 1/3 32 23 1-1/2" 1/2" 115 9.0 1 20' PT
EFFLUENT PUMPS
S40HT S40HT-11P - 1/3 45 21 1-1/2" 3/4" 115 13.0 1 20' PT
S40HT S40HT-11 - 1/3 45 21 1-1/2" 3/4" 115 13.0 1 20' M
S50HT S50HTPC1 - 1/2 100 50 2" 3/4" 115 12.0 1 20' PT
MEOSP50 MEOSP50A1 10 28214D000 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 10’ PD
MEOSP50 MEOSP50A1 20 28214D001 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 20’ PD
MEOSP50 MEOSP50A2 20 28214D002 1/2 60 25 1-1/2" or 2" 5/8" 230 5.2 1 20’ PD
MEOSP50 MEOSP50M1 10 28214D010 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 10’ M
MEOSP50 MEOSP50M1 20 28214D011 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 20’ M
MEOSP50 MEOSP50M2 20 28214D012 1/2 60 25 1-1/2" or 2" 5/8" 230 5.2 1 20’ M
MEOSP50 MEOSP50BRA1 10 28214D100 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 10’ PD
MEOSP50 MEOSP50BRA1 20 28214D101 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 20’ PD
MEOSP50 MEOSP50BRA2 20 28214D102 1/2 60 25 1-1/2" or 2" 5/8" 230 5.2 1 20’ PD
MEOSP50 MEOSP50AB1 20 28214D400 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 20’ PD
MEOSP50 MEOSP50BRM1 10 28214D110 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 10’ M
MEOSP50 MEOSP50BRM1 20 28214D111 1/2 60 25 1-1/2" or 2" 5/8" 115 9.5 1 20’ M
MEOSP50 MEOSP50BRM2 20 28214D112 1/2 60 25 1-1/2" or 2" 5/8" 230 5.2 1 20’ M
ME3 ME3H-11 26228D000 1/3 33 35 1-1/2" 3/4" 115 12.0 1 20' M
ME3 ME3H-11P 26228D010 1/3 33 35 1-1/2" 3/4" 115 12.0 1 20' PT
ME3 ME3H-21 26228D001 1/3 33 35 1-1/2" 3/4" 230 6.0 1 20' M
ME3 ME3H-21P 26228D011 1/3 33 35 1-1/2" 3/4" 230 6.0 1 20' PT
ME3 ME3F-11 26229D000 1/3 66 31 1-1/2" 3/4" 115 12.0 1 20' M
ME3 ME3F-11P 26229D010 1/3 66 31 1-1/2" 3/4" 115 12.0 1 20' PT
ME3 ME3F-21 26229D001 1/3 66 31 1-1/2" 3/4" 230 6.0 1 20' M
ME3 ME3F-21P 26229D011 1/3 66 31 1-1/2" 3/4" 230 6.0 1 20' PT
ME4 ME40110M - 4/10 62 32 1-1/2" 1/2" 115 12.5 1 10' M
ME4 ME40110T - 4/10 62 32 1-1/2" 1/2" 115 12.5 1 10' PT
ME4 ME40120M - 4/10 62 32 1-1/2" 1/2" 115 12.5 1 20' M
ME4 ME40120T - 4/10 62 32 1-1/2" 1/2" 115 12.5 1 20' PT
ME40 ME40A-11 - 4/10 80 32 1-1/2" 3/4" 115 12.0 1 10' T
ME40 ME40AC-11 - 4/10 80 32 1-1/2" 3/4" 115 12.0 1 20' T
ME40 ME40M-11 - 4/10 80 32 1-1/2" 3/4" 115 12.0 1 10' M
ME40 ME40MC-11 - 4/10 80 32 1-1/2" 3/4" 115 12.0 1 20' M
ME40 ME40AC-21 - 4/10 80 32 1-1/2" 3/4" 230 6.0 1 20' T
ME40 ME40MC-21 - 4/10 80 32 1-1/2" 3/4" 230 6.0 1 20' M
ME40 ME40P-1 - 4/10 80 32 1-1/2" 3/4" 115 12.0 1 10' PT
ME40 ME40PC-1 - 4/10 80 32 1-1/2" 3/4" 115 12.0 1 20' PT
ME40 ME40PC-2 - 4/10 80 32 1-1/2" 3/4" 230 6.0 1 20' PT
ME40-CI ME40MC-11-CI - 4/10 61 40 2" 3/4" 115 9.7 1 20' M
ME40-CI ME40MC-11-CI 30 - 4/10 61 40 2" 3/4" 115 9.7 1 30' M
ME40-CI ME40PC-11-CI - 4/10 61 40 2" 3/4" 115 9.7 1 20' PT
SEWAGE PUMPS
SRM4 SRM4P-1 26236D010 4/10 90 19 2" 2" 115 12.0 1 10' PT
SRM4 SRM4PC-1 26236D011 4/10 90 19 2" 2" 115 12.0 1 20' PT
SRM4 SRM4M1C 26236D001 4/10 90 19 2" 2" 115 12.0 1 20' M
SRM4 SRM4PC-2 26236D013 4/10 90 19 2" 2" 230 6.0 1 20' PT
SRM4 SRM4M2C 26236D003 4/10 90 19 2" 2" 230 6.0 1 20' M
SRM4 SRM4P-1-30 26236D998 4/10 90 19 2" 2" 115 12.0 1 30' PT
SRM4 SRM4S-1 26236D051 4/10 90 19 2" 2" 115 12.0 1 10' PV
SRM4 SRM4V-1 26236D041 4/10 90 19 2" 2" 115 12.0 1 20' PV
SRM4 SRM4V-2 26236D043 4/10 90 19 2" 2" 230 6.0 1 20' PV
SRM4 SRM4D-1 26236D061 4/10 90 19 2" 2" 115 12.0 1 20' PD
MSE50 MSE5012P10 - 1/2 145 22 2" 2" 115 9.0 1 10' V
MSE50 MSE5022P10 - 1/2 145 22 2" 2" 230 4.6 1 20' V
MSE50 MSE5012P20 - 1/2 145 22 2" 2" 115 9.0 1 10' V
MSE50 MSE5022P20 - 1/2 145 22 2" 2" 230 4.6 1 20' V
MSP40 MSP40A110 - 4/10 130 26 2" 1-1/4" 115 7.5 1 10’ PD
MSP40 MSP40A120 - 4/10 130 26 2" 1-1/4" 115 7.5 1 20’ PD
MSP40 MSP40A220 - 4/10 130 26 2" 1-1/4" 230 3.8 1 20’ PD
MSP40 MSP40M110 - 4/10 130 26 2" 1-1/4" 115 7.5 1 10’ M
MSP40 MSP40M120 - 4/10 130 26 2" 1-1/4" 115 7.5 1 20’ M
MSP40 MSP40M220 - 4/10 130 26 2" 1-1/4" 230 3.8 1 20’ M
GRINDER PUMPS
VR1 VRS10A-11 28172D000 1 49 61 2" - 115 13.0 1 20' PT
VR1 VRS10M-11 28172D001 1 49 61 2" - 115 13.0 1 20' M
VR1 VRS10A-21 28172D002 1 49 61 2" - 230 7.0 1 20' PT
VR1 VRS10M-21 28172D003 1 49 61 2" - 230 7.0 1 20' M
VR2 VRS20A-21 28200D000 2 33 138 1-1/4" - 230 15.0 1 20' PT
VR2 VRS20M-21 28200D010 2 33 138 1-1/4" - 230 15.0 1 20' M
VR2 VRH20A-21 28200D100 2 22 169 1-1/4" - 230 15.0 1 20' M
VR2 VRH20M-21 28200D110 2 22 169 1-1/4" - 230 15.0 1 20' M
VR2 VRF20A-21 28200D200 2 59 105 1-1/4" - 230 15.0 1 20' M
VR2 VRF20M-21 28200D210 2 59 105 1-1/4" - 230 15.0 1 20' M
VR2 VRS20-R5S 25283D504 2 33 138 1-1/4" - 230 15.0 1 20' PT
VR2 VRS20-R6S 25283D505 2 33 138 1-1/4" - 230 15.0 1 20' PT
VR2 VRS20-R7S 25283D506 2 33 138 1-1/4" - 230 15.0 1 20' PT
VR2 VRS20-R8S 25283D507 2 33 138 1-1/4" - 230 15.0 1 20' PT
VR2 VRS20A-21 RETRO FIT KIT 28164P146 2 33 138 1-1/4" - 230 15.0 1 20' PT
VR2 VRS20A-21 RETRO FIT KIT 28164P147 2 33 138 1-1/4" - 230 15.0 1 20' PT
SB24VRS10 SB24VRS10 - 1 49 61 2" - 115 13.0 1 20' PRE-T
UTILITY PUMPS
SPS-4 SPS-4 - 1/4 25 22 1" - 115 8.8 1 8' M
MES106 MES106 - 1/12 6 43 5/8" - 115 2.0 1 6' M
MUSP125 MUSP125 27546A000 1/3 40 14 1-1/4" - 115 4.0 1 8' A
DU25 DU25M1 - 1/4 19 23 1-1/4" 1/8" 115 2.5 1 15'' A
MUFKP40 MUFKP40 - 4/10 41 25 1-1/4" 1/4" 115 3.0 1 15' M
EDP55RV EDP55RV - 6-1/2 134 135 2" 2" - - - - -
LIMITED WARRANTY
Pentair Myers warrants to the original consumer purchaser (“Purchaser” or “You”) of the products listed below,
that they will be free from defects in material and workmanship for the Warranty Period shown below.
Warranty Period
Product whichever occurs first:
Jet pumps, small centrifugal pumps, submersible pumps and 12 months from date of original installation,
related accessories or 18 months from date of manufacture
Fibrewound Tanks 5 years from date of original installation
Steel Pressure Tanks 5 years from date of original installation
12 months from date of original installation,
Sump/Sewage/Effluent Products
or 36 months from date of manufacture
Battery Backup Units
MBSP-2, MBSP-2C 12 months from date of original installation,
or 18 months from date of manufacture
MBSP-3, MBSP-3C 24 months from date of original installation,
or 30 months from date of manufacture
12 months from date of shipment from factory
Wastewater Solids Handling Pumps
or 18 months from date of manufacture
Our warranty applies only where such products are used in compliance with the requirements of the applicable product catalog
and/or manuals. For additional information, please refer to the applicable standard limited warranty featured in the product
manual.
Our warranty will not apply to any product that, in our sole judgement, has been subject to negligence, misapplication, improper
installation, or improper maintenance. Without limiting the foregoing, operating a three phase motor with single phase power
through a phase converter will void the warranty. Note also that three phase motors must be protected by three-leg, ambient
compensated, extra-quick trip overload relays of the recommended size or the warranty is void.
Your only remedy, and MYERS’s only duty, is that MYERS repair or replace defective products (at MYERS’s choice). You must pay all
labor and shipping charges associated with this warranty and must request warranty service through the installing dealer as soon
as a problem is discovered. No request for service will be accepted if received after the Warranty Period has expired. This warranty
is not transferable.
MYERS SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.
THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on the duration of an
implied warranty, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You
may also have other rights which vary from state to state.
This Limited Warranty is effective April 1, 2014 and replaces all undated warranties and warranties dated before April 1, 2014.
PENTAIR MYERS
293 Wright Street, Delavan, WI 53115
Phone: 888-987-8677 • Fax: 800-426-9446 • www.femyers.com
In Canada: 490 Pinebush Road, Unit 4, Cambridge, Ontario N1T 0A5
Phone: 800-363-7867 Fax: 888-606-5484
LIMITED WARRANTY
Pentair Myers warrants its V and VR series grinders against defects in material and workmanship for a period of 24 months
from the manufacturing date, or 36 months from the manufacturing date with completion of a start-up report within 30 days of
installation. Product must be properly installed, serviced and operated in compliance with the manufacturer’s instruction manuals.
During the warranty period and subject to the conditions set forth, Pentair Myers, at its discretion, will repair or replace to the
original user, the parts that prove defective in materials and workmanship. Pentair Myers reserves the right to change or improve
its products or any portions thereof without being obligated to provide such a change or improvement for prior sold and/or shipped
units.
Start-up reports and electrical schematics may be required to support warranty claims. Submit at the time of start- up through
the Pentair Myers website: http://forms.pentairliterature.com/startupform/startupform.asp?type=m. All seal fail and heat sensing
devices must be connected, functional and monitored or this warranty will be void. Pentair Myers will cover only the lower seal and
labor thereof for all dual seal pumps. Under no circumstance will Pentair Myers be responsible for the cost of field labor, travel
expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair
Myers service facility.
Warranty Exclusions: PENTAIR MYERS MAKES NO EXPRESS OR IMPLIED WARRANTIES THAT EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF. PENTAIR MYERS SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE.
Liability Limitation: IN NO EVENT SHALL PENTAIR MYERS BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL
OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY PENTAIR MYERS PRODUCT OR PARTS
THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. PENTAIR MYERS
DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION. PENTAIR MYERS
RECOMMENDS INSTALLATION BY PROFESSIONALS.
Some states do not permit some or all of the above warranty limitations or the exclusion or limitation of incidental or consequential
damages and therefore such limitations may not apply to you. no warranties or representations at any time made by any
representatives of Pentair Myers shall vary or expand the provision hereof.
PENTAIR MYERS
293 Wright Street, Delavan, WI 53115
Phone: 888-987-8677 • Fax: 800-426-9446 • www.femyers.com
In Canada: 490 Pinebush Road, Unit 4, Cambridge, Ontario N1T 0A5
Phone: 800-363-7867 Fax: 888-606-5484
BENEFITS
• No cords allows you to place it anywhere in the home under a sink or in the
basement near your sump pit
• Gateway connects to your home router to communicate with Link2O and send you email or text alerts
• Compatible with Myers Battery Backup, other Link2O devices and existing gateways. Gateways are also
sold with some TRI-LARM models
• Powered by three AA batteries (sold separately), sends an alert when they need to be replaced
MYERS®
Model Description Sensors Gateway
WS-LINK One TRI-LARM sensor 1 -
WS-LINK-KIT One TRI-LARM sensor and one gateway 1 1
WS-LINK2-KIT Two TRI-LARM sensorS and one gateway 2 1
WS-LINK3-KIT Three TRI-LARM sensors and one gateway 3 1
Learn More At: www.mylink2o.com
HOW IT WORKS
Link2O™ is a cloud based wireless ecosystem that enables 2 way communication
between you and your device. Your device communicates to the cloud by
wirelessly transmitting to the gateway that is plugged into your home’s router.
Once the data is in the cloud you can access it through the Link2O website using a
smartphone, tablet or computer.
BENEFITS
• Easy to install and use – plug and play wireless setup with
no wiring to run in your home
• Provides advanced notification when your home is in danger of flooding
• No long term contracts, cancel at any time
• Remotely test your system from anywhere in the world
• Access to helpful resources to help keep your basement dry
MYERS®
Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
© 2019 Pentair plc. All Rights Reserved. M9000SSE (03/29/19)