Professional Documents
Culture Documents
GSB-I Close Graded MIX Desig
GSB-I Close Graded MIX Desig
1. Properties of Coarse Aggregates (Physical Requriments for Coarse Aggregate for GSB)
Aggregates
Sr.No. Test to Conduct Specific Limits
40mm 20mm 10mm 6mm
## Test Cannot tobe carried out for 6.3 and smaller sizes.
1) Water Absorption =
2) Plasticity Index =
Total
IN/PUN/IND/201400 /001
20mm Coarse Aggregate
Weight = Gm
Sieves (mm) Wt.Retain (gm) Cum.Wt.Ret. % Cum.Wt.Ret. % Passing
75.00
53.00
26.50
9.50
4.75
2.36
0.425
0.075
Pan
Total
10 mm Coarse Aggregate
Weight = Gm
Sieves (mm) Wt.Retain (gm) Cum.Wt.Ret. % Cum.Wt.Ret. % Passing
75.00
53.00
26.50
9.50
4.75
2.36
0.425
0.075
Pan
Total
6 mm Aggregate
Weight = Gm
75.00
53.00
26.50
9.50
4.75
2.36
0.425
0.075
Pan
Total
IN/PUN/IND/201400 /001
Crushed Sand
Weight = Gm
75.00
53.00
26.50
9.50
4.75
2.36
0.425
0.075
Pan
Total
Tested By Reviewed By
Annexure No.I, Verson No.2-SMC-GSB-Dated 06.05.2019
IN/PUN/IND/201400 /001
Test Result Observed : -
Note : - Trial No. Is taken for Job Mix Formula Table No.400-1 Gr.- I
40 mm
20 mm
Coaerse Aggregate
10 mm
6 mm
Max.Dry Density
O.M.C. (%)
Tested By Reviewed By
Annexure No.I, Verson No.2-SMC-GSB-Dated 06.05.2019
IN/PUN/IN/201500 /001
ANALYSIS REPORT
AGGREGATE IMPACT VALUE TEST
TEST METHOD : IS: 2386 (PART-IV) 1963 (Reaffirmed 1990) (Reaffirmed 1997) Cl. 4
Date of Test : -
Sample Serial No. : -
Observations : -
Average Value
Sr. No. Description 1 2
(%)
Total Weight of Oven dried Aggregate
1
taken A (gm.)
Remark : -
Tested by Reviewed by
Annexure No.I, Verson No.2-SMC-GSB-Dated 06.05.2019
ANALYSIS REPORT
SPECIFIC GRAVITY & WATER ABSORPTION OF AGGREGATES
( BY WIRE BASKET METHOD NO. 1 Aggregate larger than 10mm )
TEST METHOD : IS: 2386 (PART-III) 1963 Cl. 2
OBSERVATIONS : -
Sample received as : -
Average Value
Sr. No. Description 1 2
(%)
Weight of saturated aggregate & basket in
1
water, W1 (gm)
Remark : -
Tested by Reviewed by
Annexure No.I, Verson No.2-SMC-GSB-Dated 06.05.2019
ANALYSIS REPORT
SPECIFIC GRAVITY & WATER ABSORPTION (By Pycnometer)
TEST METHOD - IS: 2386 (PART III) - 1963
Size of Aggregate : -
C Sand
Observations :-
A Temperature of water
Tested by Reviewed by
PLASTIC LIMIT
Results : -
1. Liquid Limit L L = %
2. Plastic Limit P L = %
3. Plasticity Index P I = %
( P.I. = L.L. - P.L.)
Tested by Reviewed by
Annexure No.I, Verson No.2-SMC-GSB-Dated 06.05.2019
IN/PUN/IND/2012