The cross-cut test report summarizes the results of an adhesion test performed on a coating from Recoat BV applied to an aluminum substrate and cured for 72 hours at 20°C. The test involved making 11 cuts spaced 1mm apart on 3 coated samples. All 3 samples passed the test with a classification of GT 0 (5B), indicating the coating exhibited no removal from the cuts.
The cross-cut test report summarizes the results of an adhesion test performed on a coating from Recoat BV applied to an aluminum substrate and cured for 72 hours at 20°C. The test involved making 11 cuts spaced 1mm apart on 3 coated samples. All 3 samples passed the test with a classification of GT 0 (5B), indicating the coating exhibited no removal from the cuts.
The cross-cut test report summarizes the results of an adhesion test performed on a coating from Recoat BV applied to an aluminum substrate and cured for 72 hours at 20°C. The test involved making 11 cuts spaced 1mm apart on 3 coated samples. All 3 samples passed the test with a classification of GT 0 (5B), indicating the coating exhibited no removal from the cuts.