Professional Documents
Culture Documents
Contents 04 Features
16 Wiring
18 Peripheral Device
23 Option
27 Dimensions
The iS7 sets the world standard for drives (VFDs) because of
its features that meet all of your needs in AC drives.
The iS7 offers powerful performance, flexibility through
diverse options, and a more convenient and user-friendly
interface. The iS7 offers more than you can imagine.
ISO14001, ISO9001
Reliability
Powerful Electric Current Type Sensorless Vector Control
Our iS7 technology includes a competitive and strong low-speed torque
control and a speed-precision-driven vector algorithm.
● Speed control range 100:1
High
04 | LS ELECTRIC Co., Ltd.
Performance
Sensored Vector Realizing Precise Speed/Torque Control Ride-Through (LV Trip Delay) for Sudden Power Loss
In the entire speed range including zero speed, powerful torque (more
than 250%) performance is materialized through receiving Max. 200kHz
frequency pulse via encoder-dedicated board.
• Speed control range 1000:1
• Instant Max. torque control capability 250%
• 50Hz speed control response
Powerful Performance
V/F Control, V/F PG, Slip Compensation, Sensorless Vector Control
Automatic Torque Balance Droop Control Kinetic Energy Buffering (KEB) for a Stable System Stop
Droop control algorithm adjusts changeable torque driven by speed. This in Case of Power Loss or Failure
algorithm is easily applicable to open loop linking driving and load sharing
driving.
SpeedSearch
Time [s]
Operation
Command ON ON
Safety Option
Power and Flux Braking for Maximum Deceleration The Safety input function meets EN ISO 13849-1 PLd and EN 61508 SIL2
(EN60204-1, stop category 0).
This feature is standard and enables compliance with current safety standards.
Flexibility
Expansion
* 1) Extension I/O-2 is only dedicated for WEB(Winder)
customized models.
* 2) In order to use position control and synchronous
options, customer have to purchase that customized
product or to install customized main software.
* 3) Below 22kW : Default built-in basic I/O
Above 30kW : Default built-in isolation I/O
* More information about the options, refer to the 23Page.
User-Friendly Options
Diverse Communication Options, Expansion I/O Options, PLC Options,
Encoder Options, IP54 Enclosure Options
Option Slot #1
Option Slot #3
Option Slot #1(Field bus)
• Profibus DP • DeviceNet
• CANopen • CC-link
• Ethernet IP / Modbus-TCP
• LonWorks • R-Net/F-Net
• RAPIEnet • PROFInet
• CC-Link IE
Option Slot #2
Convenience
Environment
EMC Filter (In Conformity With EN61800-3) Built-in For DC Reactor Built-in for Harmonic Reduction and Power
Protection From Excessive Electronic Distortion Factor Improvement
Efficient Architecture of 5-Mode 15-Parameter Groups User & Macro Group Support
Multi-Function Key
Application
STARVERT iS7 Feature | Variety Application
Variety
● C3 conformal coating ● Elevator master function (with PLC option) ● Stationary torque holding
● IP54 enclosure ● Ideal S curve (for comfortable driving) ● Dual motor control
SV 0008 iS7 -- 2 N O F D W
2.1.2 Rated Input and Output: Input Voltage of 200V Class (30~75kw)
Type: SV iS7-2 0300 0370 0450 0550 0750 - - - - -
[HP] 50 60 75 100 125 - - - - -
VT
[kW] 37 45 55 75 90 - - - - -
Motor Applied 1)
[HP] 40 50 60 75 100 - - - - -
CT
[kW] 30 37 45 55 75 - - - - -
2)
Rated Capacity [kVA] 46 57 69 84 116 - - - - -
CT 116 146 180 220 288 - - - - -
Rated Rated Current [A] 3)
VT 146 180 220 288 345 - - - - -
Output
Output Frequency [Hz] 0 ~ 400 [Hz] 4) (Sensorless -1: 0 ~ 300Hz, Sensorless -2, Vector. 0.1~120Hz)
Output Voltage [V] 3-phase 200 ~ 230V 5)
Available Voltage [V] 3-phase 200 ~ 230 VAC (-15% ~ +10%)
Rated Input Frequency 50 ~ 60 [Hz] (±5%)
Input CT 121 154 191 233 305 - - - - -
Rated Current [A]
VT 152 190 231 302 362 - - - - -
*1) Motor Applied indicates the maximum capacity applied of a standard 4 pole OTIS-LG motor.
*2) Rated Capacity: the input capacity of a 200V class is based on 220V and that of a 400V class is based on 440V. The current rating is based on CT current.
*3) The output of rated current is limited according to the setting of the carrier frequency (CON-04).
*4) In case of Sensorless-1, you can set the frequency at up to 300Hz by selecting 3, 4 as the control mode (DRV-09 Control Mode).
In case of Sensorless-2, you can set the frequency at up to 120Hz by selecting 3, 4 as the control mode (DRV-09 Control Mode).
*5) The maximum output voltage does not go up over the supplied power voltage. You can select the output voltage as you want below the supplied power voltage.
* Non DCR products are provided warranty service when used in CT (Heavy duty) load rating only.
Control
Control Method V/F control, V/F PG, slip compensation, sensorless vector-1, sensorless vector-2, vector control
Digital command: 0.01Hz
Frequency Setting Resolution
Analog command: 0.06Hz (maximum frequency: 60Hz)
Specifications
Control Method Selectable among keypad/terminal block/communication operation
Analog: 0 ~ 10 [V], -10 ~ 10 [V], 0 ~ 20 [mA]
Frequency Setting
Digital: keypad
PID control, up-down operation, 3-wire operation, DC brake, frequency limit, frequency jump,
second function, slip compensation, reverse rotation prevention, auto restart,
Operating Function
drive by-pass, auto tune flying start, energy buffering, power braking,
flux braking, leakage current reduction, MMC, easy start
NPN (Sink)/PNP (Source) selectable
Function: forward operation; reverse operation; reset; external trip; emergency stop;
Multi-Function Terminal
jog operation; sequential frequency-high; medium and low; multi-level acceleration and deceleration-high;
Input (8 Points) medium and low; D.C. control during stop; selection of a second motor; frequency increase;
P1 ~ P81 1) frequency decrease; 3-wire operation; change to general operation during PID operation;
main body operation during option operation; analog command frequency fixation;
acceleration and deceleration stop selectable
Multi-Function Open
Below DC 46V 100mA
Collector Terminal
Drive fault output
Output Multi-Function Below (N.O., N.C.) AC250V 1A,
Relay Terminal Below DC 30V 1A
Analog Output 0 ~ 10 Vdc (below 20mA): selectable from frequency, current, voltage, direct current voltage
*1) The Functions for Multi-function terminal available according to IN-65~72 parameter setting of IN Group.
Protective Functions
Over voltage, low voltage, over current, over current detection, drive overheat, motor thermal protection, phase loss
Trip protection, overload protection, communication error, frequency command loss, hardware failure, cooling fan failure, pre-PID
failure, no motor trip, external brake trip. Safety function, etc.
Alarm Stall prevention, overload, diminished load, encoder error, fan failure, keypad command loss, speed command loss.
Below CT class 15 msec (VT class 8 msec): operation continues (within rated input voltage, rated output)
Instantaneous Interruption 2)
Over CT class 15 msec (VT class 8 msec): automatic restart
*3) UL Enclosed type 1 with conduit box installed. (30~75kW(200V) conduit box has been installed, is open type IP 20)
1)
3Ø AC Input 50/60Hz
MCCB MC
P(+) B N(-)
R(L1) U
S(L2) V
T(L3) W
CM
-10~10V Input
※ “●” Main power circuit “○” Control circuit
P(+) B N(-)
0.75 ~ 22kW
DB Unit (Option)
*2) For 0.75~22kW, please connect to 5G. For 30~375kW, please connect to CM.
P(+) P2(+) N(-) *3) For 0.75~160kW, the safety option cannot be installed in the field. A type “T”
safety iS7 must be specified and ordered from the factory.
30 ~ 75kW For 185~375kW, a safety option can be purchased separately and field
installed on the standard iS7.
0.75~22kW (Basic I/O)
Open 24V
port
RS485
Relay2 collector power
(Normal open) output supply
0~10V Output
4~20mA Output
Relay1 (Normal open)
port
RS485
(Normal open) output supply
0~10V Output
4~20mA Output
Relay1 (Normal open)
TR terminal located on the above the right side of terminal block is for the terminal resistor of RS485 communication(120 )
We recommend the potentiometer for 1/2W, 1k .
* Description of TR terminal and variable resistence are same as those of insulated I/O.
4~20mA Output
0~20mA Output
4~20mA Output
0~20mA Output
DC Reactor Specifications
200V 30~75kW 400V 280~375kW
Specifications of the DC Reactor Specifications of the DC Reactor
Capacity of Drive Capacity of Drive
mH A mH A
0300iS7-2 0.24 200 2800iS7-4 0.09 836
0370iS7-2 0.2 240 3150iS7-4 0.076 996
0450iS7-2 0.17 280 3750iS7-4 0.064 1195
0550iS7-2 0.12 360
0750iS7-2 0.1 500
400V/30–75kW (For Non-DCR products, remove the P1 and P2 shorting pins to install the DC reactor.)
DC reactor specifications
Inverter capacity
mH A
0300iS7-4 0.98 75
0370iS7-4 0.87 90
0450iS7-4 0.55 110
0550iS7-4 0.47 150
0750iS7-4 0.48 180
10
10
10
10
10
1
1
5
5
120 120 120 120 120
219 219 219 219 219
425
440
15425
425
440
440
425
440
425
15440
402
402
402
402
402
RUN RUNRUN RUN RUN
332
355
355
370
370
332
332
355
370
355
332
370
332
223 223 223 223 223 OHT OHTOHT OHT OHT
15
15
15
OCT OCTOCT OCT OCT
5
Front Front Front Right
Front Right
Front Right
Bottom Right Bottom Right Bottom Bottom Bottom 120 120 120 120 120
219 219 219 219 219
224.5
224.5
224.5
224.5
224.5
223 223 223 223 223
188
188
188
188
188
239.5
239.5
239.5
239.5
239.5
Front Front Front Right
Front Right
Front RightBottom Right Bottom Right Bottom Bottom Bottom
215.7
215.7
215.7
215.7
215.7
111
111
111
111
111
148.5
148.5
148.5
148.5
148.5
101
101
101
101
101
15
15
15
15
15
5
5
5
120
iS7
120
120 120 120
219
219 219 219
223
223 223 223 4-M5 Mounting 4-M5 Mounting 4-M5 Mounting 4-M5 Mounting 4-M5 Mounting
2-Ø5.5 2-Ø5.5 2-Ø5.5 2-Ø5.5 2-Ø5.5
15
15
15
5 15
15
120
5
5
5
Right Front
Front Bottom Right
Right Front Front Bottom
Bottom Right Right 120Bottom Bottom 120
120 120 120
219 219
219 219 219
223 223
223 223 223
Peripheral Devices
DBU
Front Right
Front
Front Bottom Right
Right Front Front Bottom
Bottom Right Right Bottom Bottom
DBU WIRING
R U R1
S V IM R2
T (P2)
P N W
G
B2
WIRING
AC Drive
N
B1
P
IM
425
440
402
RUN
355
370
332
OHT
OCT
FOT
224.5
188
239.5
215.7
111
148.5
101
15
120
5
120
219
223
15
5
Front Right Bottom 120
219
DBU 223
G
Front Front Front Right
Front Right
Front Right Bottom
Right Bottom
Right Bottom Bottom Bottom
B2
N
B1
P
425
440
402
RUN
OHT
4-M5 Mounting
2-Ø5.5 OCT
FOT
239.5
215.7
Right Front
Front Bottom Right
Right Front Front Bottom
Bottom Right Right Bottom Bottom
111
148.5
G G G G G
Front RightFront
Front Bottom
Right
Right Front Front Bottom
Bottom Right Right Bottom Bottom
G Ground terminal
101
15
5
B2
120
P B1
P N
B1
P P
B2
N
B1 B1
P
B2
GN B1
NB2
G B2
NG B2
G G PB1N P B1NB2PB1 NB2B1N B2 NB2
4-M5 Mounting
P G PB1 GG G GB2 B1 Terminal for connection with B1 of DBU
Group 2 75kW DB
75kW DB
75kW
단자대 75kW
단자대DB 단자대
DB
75kW DB 단자대
단자대 220kW220kW
DB 단자대
220kW
DB 220kW
단자대DB 220kW
DB 단자대
단자대 DB 단자대
N Terminal for connection with N of drive
P Front B1 N B2
PP Right B1
G
B1 NN B2 B2
PP PGGB1
B1B1 N NN PB2
P B2
B2 GB1G
B1 NN P B2B2
P B1 B1 N N B2 B2
Bottom
Front Right Bottom
P Terminal for connection with P1 of drive
*Note: READ DBU User manual certainly when selecting DB resistors.
75kW DB 단자대 75kW
75kWDB 단자대 220kW
DB단자대 75kWDB
75kW
DB단자대
DB
단자대 220kW
220kWDB
단자대 DB단자대
단자대 220kW
220kW
DBDB
단자대단자대
G
Bottom
Group 3 Front Right Bottom
Terminal Function
P B1 N B2 G P B1 N B2 P Terminal for connection with P of drive
B1 Terminal for connection with B1 of DBU
G
75kW DB 단자대 220kW DB 단자대
N Terminal for connection with N of drive
Group 4
P B1 N B2 G B2 Terminal for connection with B2 of DBU
P B1 N B2
G Ground terminal
75kW DB 단자대 220kW DB 단자대
P(+) N(-) B1 B2 N.C E
Dynamic braking
unit
Dynamic braking
resistor
Input power
Profibus-DP Devicenet
• Profibus dedicated connector •C ommunication speed: 125kbps,
• Max. 12Mbps communication speed 250kbps, 500kbps
• Max. 32 stations per segment • Free/Bus topology
• Bus topology • Max. 64 node connection points
• Enhanced on-line diagnosis • Max. 500m (1640 ft.) transmission
distance (125kbps)
R-Net/F-Net RAPIEnet
• 1Mbps communication speed • RAPIEnet protocol support
•M anchester biphase-L frame • 100Mbps communication speed
synchronization • Full duplex support
• Max. 64 node connection points • H
igh speed link(8 WORD),
• M
ax. 750m transmission distance P2P(2 WORD) support
(segment each) • Max. 64 connection points
• Topology : Line/Ring topology
Marine Certification
Marine classification is that the structure and equipment of the ship has been estimated from the test with the certain standards for
certificate issued and given by classification society. SV-IS7 Series is certificated with product testing, process, production equipment
and test equipment to install on the shipping.
Certified Model Types SV-iS7 series (Range: 0.75kW~75kW, 200V Class / 0.75kW~375kW, 400V Class)
Compliance Det norske veritas’ rules for classification of ships, high speed & light craft det norske veritas’ offshore standards
Certified Model Types SV-iS7 Series (Range: 0.75kW~75kW, 200V class / 0.75kW~375kW, 400V Class)
Certified Model Types SV-iS7 series (Range: 0.75kW~75kW, 200V Class / 0.75kW~90kW, 400V Class)
KR (Korean Resister)
Certification Institute KR (Korean resister)
Certified Model Types SV-iS7 Series (Range: 0.75 kW–75 kW, 200V / 0.75 kW–375 kW, 400V)
Marine Certification
Voltage Type DNV BV ABS KR
SV0008iS7-2 V ◯ ◯ ◯ ◯
SV0015iS7-2 V ◯ ◯ ◯ ◯
SV0022iS7-2 V ◯ ◯ ◯ ◯
SV0037iS7-2 V ◯ ◯ ◯ ◯
SV0055iS7-2 V ◯ ◯ ◯ ◯
SV0075iS7-2 V ◯ ◯ ◯ ◯
SV0110iS7-2 V ◯ ◯ ◯ ◯
◯ ◯ ◯ ◯
3-Phase
SV0150iS7-2 V
200V Class
SV0185iS7-2 V ◯ ◯ ◯ ◯
SV0220iS7-2 V ◯ ◯ ◯ ◯
SV0300iS7-2 V ◯ ◯ ◯ ◯
SV0370iS7-2 V ◯ ◯ ◯ ◯
SV0450iS7-2 V ◯ ◯ ◯ ◯
SV0550iS7-2 V ◯ ◯ ◯ ◯
SV0750iS7-2 V ◯ ◯ ◯ ◯
SV0008iS7-2 V ◯ ◯ ◯ ◯
SV0015iS7-2 V ◯ ◯ ◯ ◯
SV0022iS7-2 V ◯ ◯ ◯ ◯
SV0037iS7-2 V ◯ ◯ ◯ ◯
SV0055iS7-2 V ◯ ◯ ◯ ◯
SV0075iS7-2 V ◯ ◯ ◯ ◯
SV0110iS7-2 V ◯ ◯ ◯ ◯
SV0150iS7-2 V ◯ ◯ ◯ ◯
SV0185iS7-2 V ◯ ◯ ◯ ◯
SV0220iS7-2 V ◯ ◯ ◯ ◯
SV0300iS7-2 V ◯ ◯ ◯ ◯
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0008~ 150 127 284 257 18 200 5 5
0037iS7-2/4 (5.90) (5.00) (11.18) (10.11) (0.70) (7.87) (0.19) (0.19)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0055~ 200 176 355 327 19 225 5 5
0075iS7-2/4 (7.87) (6.92) (13.97) (12.87) (0.74) (8.85) (0.19) (0.19)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0110~ 250 214.6 385 355 23.6 284.8 6.5 6.5
0150iS7-2/4 (9.84) (8.44) (15.15) (13.97) (0.92) (11.21) (0.25) (0.25)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0185~ 280 243.5 461.6 445 10.1 299 6.5 6.5
0220iS7-2/4 (11.02) (9.58) (18.17) (17.51) (0.39) (11.78) (0.25) (0.25)
mm(inches)
Applied Drives W1 W2/W3 H1 H2 H3 D1 A B C
300 190 570 552 10 265.2 9 10
SV0300iS7-2 M8
(11.81) (7.48) (22.44) (21.73) (0.39) (10.44) (0.35) (0.39)
mm(inches)
Applied Drives W1 W2/W3 H1 H2 H3 D1 A B C
SV0370~ 370 270 630 609 11 281.2 10 10
M10
0450iS7-2 (14.56) (10.63) (24.8) (23.97) (0.43) (11.07) (0.39) (0.39)
mm(inches)
Applied Drives W1 W2/W3 H1 H2 H3 D1 A B C
SV0550~ 465 381 750 723.5 15.5 355.6 11 11
M16
0750iS7-2 (18.3) (15.0) (29.52) (28.48) (0.61) (14.0) (0.43) (0.43)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 D2 A B C
DCR type
SV0300~ 300.1 242.8 594.1 562 24.1 10 10
302.7 161 M8
0450iS7-4 (11.81) (9.55) (23.38) (22.12) (0.94) (0.39) (0.39)
(11.92) (6.33)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 D2 A B C
DCR type
SV0550~ 370.1 312.8 663.5 631.4 24.1 10 10
373 211.5 M8
0750iS7-4 (14.57) (12.31) (26.12) (24.85) (0.94) (0.39) (0.39)
(14.69) (8.32)
mm(inches)
Applied Drives W1 W2 W3 H1 H2 H3 D1 A B C
SV0900/ 510 381 350 783.5 759 15.5 422.6 11 11
M16
1100iS7-4 (20.07) (15.0) (13.77) (30.84) (29.88) (0.61) (16.63) (0.43) (0.43)
mm(inches)
Applied Drives W1 W2 W3 H1 H2 H3 D1 A B C
SV1320/ 510 381 350 861 836.5 15.5 422.6 11 11
M16
1600iS7-4 (20.07) (15.0) (13.77) (33.89) (32.93) (0.61) (16.63) (0.43) (0.43)
mm(inches)
Applied Drives W1 W2 W3 H1 H2 H3 D1 A B C
SV1850/ 690 581 528 1078 1043.5 25.5 449.6 14 15
M20
2200iS7-4 (27.16) (22.87) (20.79) (42.44) (41.08) (1.00) (17.70) (0.55) (0.59)
mm(inches)
Applied Drives W1 W2 W3 H1 H2 H3 D1 A B C
772 500 500 1140.5 1110 15 442 13 13
SV2800iS7-4 M16
(30.39) (19.69) (19.69) (44.90) (43.70) (0.59) (17.40) (0.51) (0.51)
mm(inches)
Applied Drives W1 W2 W3 H1 H2 H3 D1 A B C
SV3150/ 922 580 580 1302.5 1271.5 15.5 495 14 14
M16
3750iS7-4 (36.30) (22.83) (22.83) (51.28) (50.06) (0.61) (19.49) (0.55) (0.55)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0008~ 204.2 127 419 257 95.1 208 5 5
0037iS7-2/4 (8.04) (5.00) (16.49) (10.12) (3.74) (8.18) (0.19) (0.19)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0055~ 254 176 460.6 327 88.1 232.3 5 5
0075iS7-2/4 (10.00) (6.92) (18.13) (12.87) (3.46) (9.14) (0.19) (0.19)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0110~ 313.1 214.6 590.8 355 101.7 294.4 6.5 6.5
0150iS7-2/4 (12.32) (8.44) (23.25) (13.97) (4.00) (11.59) (0.25) (0.25)
mm(inches)
Applied Drives W1 W2 H1 H2 H3 D1 A B
SV0185~ 343.2 243.5 750.8 445 91.6 315.5 6.5 6.5
0220iS7-2/4 (13.51) (9.58) (29.55) (17.51) (3.60) (12.42) (0.25) (0.25)
18.7
22
18.7
18.7 22
2-22 28.6
317.5317.5
18.7
22
2- 28.6
317.5
2- 28.6
317.5
2- 28.6
200200200 200
145.3145.3
117117117 117
96.5 96.5
145.3
145.3
96.5
96.5
67.5 32 25
150 Drive + Conduit Box
67.5 32 25
67.5 3215025 Drive + Conduit Box
67.5 3215025 Drive + Conduit Box
150 Drive + Conduit Box
SV0055 ~ 0075iS7 (200V/400V Class)
0.5 34.3 2- 22
0.5 34.3 22 44.5
2- 2-
390390390 390
0.5 34.3 2- 22
35 0.5 34.3 22 44.5
2- 2-
2- 44.5
35 2- 44.5
35
225225225 225
35
173173173 173
138138138 138
118118118 118
103103103 103
3
78 43 48 Drive + Conduit Box
3 200
78 3
43 48 Drive + Conduit Box
78 3 200 48
43 Drive + Conduit Box
78 43200 48 Drive + Conduit Box
200
30.5 38.8 2- 22
2- 22
509509509 509
30.5 38.8 3- 51
30.5 38.8 2- 22
30.5 38.8 2-
3- 22
51
3- 51
3- 51
285285285 285
236.3236.3
186.3186.3
236.3
236.3
186.3
186.3
146.3
4.5
146.3 65.5 74.5
Drive + Conduit Box
4.5
146.3
4.5
65.525074.5
Drive + Conduit Box
146.3
4.5 Drive + Conduit Box
65.5 74.5
250
65.5 74.5
Drive + Conduit Box
250
250
3- 63.5 85 2- 22
3- 63.5 85 2- 22
3- 63.5 85 2- 22
3- 63.5 85 2- 22
300300300 300
247.3247.3
207.3207.3
247.3
207.3
247.3
207.3
157.3 170
157.3
280
170
Drive + Conduit Box
157.3 170
280 Drive + Conduit Box
157.3 170
280 Drive + Conduit Box
280 Drive + Conduit Box
3- 63.5 85 2- 22
3- 63.5 85 2- 22
3- 63.5 85 2- 22
300300300
247.3
207.3
247.3
207.3
247.3
207.3
157.3 170
157.3 280
170 Drive + Conduit Box
157.3 280
170 Drive + Conduit Box
280 Drive + Conduit Box
85 4- 22
3- 63.5
748.3
85 4- 22
3- 63.5
748.3
85 4- 22
3- 63.5
303303303
252.2
219.2
189.2
252.2
219.2
189.2
252.2
219.2
189.2
169.2 170
169.2 300
170 Drive + Conduit Box
169.2 300
170 Drive + Conduit Box
300 Drive + Conduit Box
3- 63.5 80 4- 22
3- 63.5 80 4- 22
3- 63.5 80 4- 22
373.3
322.7
292.7
373.3
284.7
322.7
242.7
373.3
292.7
284.7
322.7
242.7
292.7
284.7
242.7
219.7
120
219.7 195
120 Drive + Conduit Box
219.7 370
195
120 Drive + Conduit Box
370
195 Drive + Conduit Box
370
146.2
127 57.5
5
6
146.2
127 57.5
5
6
146.2
127 57.5
5
310
299
6
281
200
310
299
281
200
310
299
281
5
Drive + Flange
200
310
299
129.5 140
57.5
281
148.2 150
200
129.5
5
57.5
140 Drive + Flange
SV0055 ~ 0075iS7 (200V/400V Class)
195.4
148.2 150
176 64
5
Drive + Flange
5.5
129.5 5 140
57.5
148.2 150
195.4
176
129.5
5
64
57.5
140 Drive + Flange
5.5
5 150
148.2
195.4
176 64
5.5
5
195.4
176 64
5.5
5
380
369
350
380
369
225
350
380
369
350
225
380
369
350
5 189
225
176 64
200 Drive + Flange
197.8
225
5 189
176 64
200 Drive + Flange
197.8
231.2
214.6 5 137 189
64 Drive + Flange
8.5
197.8 6.5
231.2
214.6 137
8.5
6.5
231.2
214.6 137
8.5
6.5
417
402
370
285
417
402
370
285
417
402
370
285
6.5
417
402
370
137 234
214.6
250 Drive + Flange
231.2
285
6.5
137 234
214.6
250 Drive + Flange
231.2
261.4 6.5
243.5 148
137 234
Drive + Flange
10.1
214.6
6.5 250
231.2
6.5
261.4 137 234
214.6
243.5 148 250 Drive + Flange
10.1
231.2
6.5
261.4
243.5 148
10.1
502.6
461.6
486
6.5
502.6
461.6
486
300
502.6
461.6
486
300
502.6
461.6
486
6.5
265
148 Drive + Flange
300
243.5 280
261.4
6.5
300
265
243.5 148
280 Drive + Flange
261.4
6.5
265
243.5 148
280 Drive + Flange
261.4
6.5
265
243.5 148
280 Drive + Flange
261.4
6.5
261.4
243.5
261.4 148
6.5
243.5 148
10.1
6.5
502.6 502.6
461.6 461.6
486486 486
502.6
461.6
300
300300
6.5
148 265
243.5 280
261.4
Drive + Flange
6.5
148 265
243.5 6.5 280
261.4 148 265 Drive + Flange
243.5 280 Drive + Flange
SV0300 ~ 0450iS7 (400V Class) 261.4
274.4
242.8 157.8
10
12
274.4
242.8
274.4 157.8
10
12 12
242.8 157.8
10
648
628
581
648648
628628
581581
303.2 303.2
303.2
10
278
242.8 157.8
300 Drive + Flange
274.4 10
278
242.8 10 157.8
300
278 Drive + Flange
274.4
242.8 157.8
300 Drive + Flange
274.4
10
344.4
312.8 208.3
344.4
12 12
312.8 10 208.3
10
717.4 717.4
697.4 697.4
650.4 650.4
717.4
697.4
650.4
10
348
312.8 208.3
370
344.4 10
Drive + Flange
348
312.8 10 208.3
370
348
344.4
312.8 208.3 Drive + Flange
370
344.4 Drive + Flange
• For your safety, please read user's manual thoroughly before operating.
• Contact the nearest authorized service facility for examination, repair, or adjustment.
• Please contact qualified service technician when you need maintenance.
Do not disassemble or repair by yourself!
• Any maintenance and inspection shall be performed by the personnel having expertise concerned.
• According to The WEEE Directive, please do not discard the device with your household waste.
www.lselectric.co.kr
Headquarter Overseas Branches
LS-ro 127(Hogye-dong) Dongan-gu, Anyang-si, Gyeonggi-Do, 14119, Korea •LS ELECTRIC Tokyo Office (Japan)
Tel: 81-3-6268-8241 E-Mail: jschuna@lselectric.biz
Seoul Office
LS Yongsan Tower, 92, Hangang-daero, Yongsan-gu, Seoul, 04386, Korea •LS ELECTRIC Beijing Office (China)
Tel: 82-2-2034-4644(Europe), 4982(USA), 4884(East Asia) Tel: 86-10-5095-1631 E-Mail: khpaek@lselectric.com.cn
Fax: 82-2-2034-4588 E-mail: drivesales@lselectric.co.kr •LS ELECTRIC Shanghai Office (China)
Tel: 86-21-5237-9977 E-Mail: tsjun@lselectric.com.cn
2020. 04 ⓒ 2008. 02 LS ELECTRIC Co.,Ltd. All rights reserved. / (30) 2020. 04 Human Power