Professional Documents
Culture Documents
Fernandez
Flywheel Camshaft
Fuel Injector
Crankshaft
Jackstand
Socket
Socket
IV. Write True or False (1 point each)
False 1. It is good for the engine to remove the thermostat
False 2. Better to replace each spark plug than removing them in the same time
True 3. Measure first the engine oil before to start the engine
False 4. When the engine is running, it is good to poke in the oil filler hole
5. When the temperature gauge reaches almost at the H side, it is still good to
operate the vehicle until it reaches at the maximum level
False 6. Fill the engine with oil until it reaches at the top of the engine
True 7. All engine has an operating temperature
8. Put kerosene for better flushing all the oil than using the engine flush additive
True 9. Before working under of the vehicle, the vehicle must be stable and placed in jack
stands
False 10.For operating the vehicle, you should always maximize the RPM of the engine
False 11.When the oil is low, you can use Canola oil or Vegetable oil because it is also an oil
True 12.You should be alert all times
True 13.Use safety glasses or goggles when working
True 14.Always pay attention to the gauges in the gauge panel
V. 3 points each (Draw at the back of the first page of the paper)