Professional Documents
Culture Documents
Zetron 402-EMU
Zetron 402-EMU
Introduction
Features
RXA1
TNV or User Equip SELV Side
Rx1
• 600 ohm balanced audio channel interface
RXB1
TXA1
600R
Tx1
• Dual “E” and “M” leads per channel (opto
TXB1
600R
+6dB isolated)
CHANNEL 1 Audio Interface
+ve Batt
Signalling Interface • Channels may be assigned to timeslots in 2Mbs
+VV SO11’
SO11
SO21’
streams connected to the Acom or cross
SO21 connected to channels in other line cards
SI11 SI11’
SI21 SI21’
installed in the Acom sub-rack. Channels may
-VV also be cross connected to other channels on
LINE INTERFACE
-ve Batt
CODEC 1 the same EMU card.
CHANNEL 2
(as per Channel 1 above) Options
CHANNEL 3
• As well as the ± 48V -12V signalling is available
(as per Channel 1 above)
CODEC 2
• For 2W E+M and other specialist 4W interfaces
CHANNEL 4
(as per Channel 1 above)
refer to Acom DMU Product Briefs
Applications
CHANNEL 5
(as per Channel 1 above)
IOM-2
• Radio Bases
BUS TO
CHANNEL 6
CODEC 3 BACK
PLANE • Operator Console Audio Interfaces
(as per Channel 1 above)
• Inter Site VF links
AUDIO CHANNELS
Channels per card • 6
Termination • 4 Wire
Impedence • 600 ohm
Receive gain • -6... +18dB
Transmit gain • -18... +6dB
0 dBm setup level • -18... +6dBm
Maximum instantaneous transmit level
at a gain of +0dB • 3dB
at a gain of +6dB • 9dB
Frequency response • CCITT G.712
Variation of gain with level • CCITT G.712
Signal to total distortion • CCITT G.712
Return loss • CCITT G.712
Sampling • A-law PCM (8 kHz)
ELECTRICAL
Idle power consumption • +5V 60mA
• +12V 5mA
• -12V 35mA
Maximum power consumption • +5V 200mA
• +12V 10mA
• -12V 60mA
MECHANICAL
Height x width • 233mm x 220mm
ENVIRONMENT
Specification temperature range • 0 to 50°C
Operating temperature range • -10 to 60°C
Humidity • 45% RH at 45°C