00 ®@
aS Oe Ua) e710 eL
SMPS TYPE (SP103/B)
# 10, VINAY COMPLEX, 1” CROSS, RAJGOPAL NAGAR MAIN ROAD, GANAPATHI NAGAR,
PEENYA III PHASE, BANGALORE — INDIA - 560058
Mail: mkt@secoindia.co.in & sales@secoindia.co.in, Web: www.secoindia.co.inSAHYADRI (SECO) make POWER PACK WITH BATTERY BACKUP is designed with SMPS based
advance technology used as a power source for Breakers & Control Relay panels in substations where
dedicated station batteries are not available. Internal 12V battery of the power pack gets charged from
AC source and it will give DC Voltage output to the connected loads for operating close/trip coils and
other essential loads such as auxiliary supplies to protection relays, Indicating Lamps and other circuits.
FEATURES:-
> Robust SMPS based hardware design
> Suitable for VCB & Control Relay panel operation
> SMPS based design
> Inbuilt 12V DC maintenance free sealed Battery
> Battery replaceable type design
> Inbuilt Short circuit & overload protection,
> Battery voltage status Indication
> Battery drain protection during transit or storage
TECHNICAL SPECIFICATIONS:-
> Input Voltage: 110 V AC (range 88 to 132 V) - 230 VAC (Range - 175 to 275V AC)
> Input Burden: Less than 20 VA (0.09A at 230V AC) during Charging Period without load
> Input Burden: Less than 120VA (0,520A at 230V AC) during charging and with Full Load
> Output Voltage: 24V DC or 110V DC.
WITH AC INPUT SUPPLY ON:-
> Output Load: 100W Nominal
> Continuous Load: 100 Watts
> Impulse Load: 450 W for 240 m Sec.
WITHOUT AC INPUT SUPPLY:-
> Output Load: 100W Nominal
> Continuous Load: 100 Watts for 15 minutes
> Impulse Load: 450 W for 240 m Sec, (For 10 pulses)OVER VOLTAGE PROTECTION:-
> During No load operation & when battery charging is ON, output DC voltage
will not exceed the specified voltage
SHORT CIRCUIT PROTECTION:-
> Suitable short circuit protection is provided for output internally
along with output 6A Fuse
> Indication provided on the front of the unit
1) Mains ON
2) Output switch off
3) Battery operation
4) Output overload
5) Output ON
6) Battery Voltage status with Battery charging status
> Battery charging period: 8 Hours
> Output ON/OFF: Switch provided on front side of the unit
> Battery 12v 7 AH: Separate battery compartment for replacement
> Overall Dimension: 245(w) X135(H) X 227(D) mm
> Mounting pitch: 100 mm (1. -R) x 160 (T - B)
> Net Weigh: 5.5 KGDIMENSIONAL DRAWING
ES dE 0" yas pe EET Seco
No 10,Vinay Complex, Ist Cross, Rajgopal nagar Main Road,
Ganapati Nagar, Peenya 3rd Phase,
Bangalore-560058
080-4149 2637 / +91 9035048537 / +91 9448408537 / +91 9980544028
After Sales / Service : +91 9606040824
mkt@secoindia.co.in / sales@secoindia.co.in / manjunatha@secoindia.co.in