Professional Documents
Culture Documents
NOTE:
If you install the NC or the PLC by
next way, you should clear the NC
or the PLC in current CNC at first.
Before you install the NC or the
PLC, I advise you turn the S3
switch to “0” position and turn the
S4 switch to “2” position.
And turn the S4 switch back to
“0” position, after you finish
install the software.
1/4
Enter Siemens ISO interface
Push “Start Up“ soft key
Input password SUNRISE
Push “Machine data” soft key
2/4
Write “C:” under the Logic drivers
Write ”ATA” under the Line1
Write “CARD” under the Line2
3/4
Push the “Data in” soft key
Push the “More” soft key
4/4