Professional Documents
Culture Documents
for
RF IDeas CDC USB Readers
CONFIDENTIAL
LOADABLE DRIVER INSTALLATION GUIDE
Table of Contents
1.0 OVERVIEW OF LOADABLE DRIVER FOR C364E SERIES, C554E SERIES, BIZHUB 364E SERIES, AND BIZHUB
554E SERIES ......................................................................................................................................... 1
2.0 PREPARE USB MEMORY STICK .............................................................................................................. 1
3.0 DISABLE CURRENT LOADABLE DRIVER (IF NECESSARY) ........................................................................... 1
4.0 INSTALL THE LOADABLE DRIVER SOFTWARE ........................................................................................... 2
5.0 CONFIGURE MFP TO USE LOADABLE DRIVER .......................................................................................... 2
6.0 CONFIRM FIRMWARE UPDATE (OPTIONAL) .............................................................................................. 3
The Loadable Driver software is delivered as a single self-extracting executable file. The specific
process of installing the software varies, depending on the MFP family, but generally follows these steps:
2. Connect a USB memory stick to the USB port on the PC. The USB memory stick should have the
following features:
32 MB free.
Less than 8 GB capacity.
Without security protections.
Formatted to Fat32.
4. Copy the file to the USB memory stick by doing one of the following:
Use the Browse button to select the USB memory stick and extract the file directly to it.
Extract the file to a temporary folder and then copy the created file (named ‘ICC_LDR.tar)
to the memory stick.
5. Eject the USB memory stick when done. The USB memory stick is now ready to be used to install
the Loadable Drive software onto the MFP.
1. Enter Service Mode on the MFP. If necessary, consult an authorized service technician for help
on entering Service Mode.
2. Enter the Billing Setting.
3. Choose the “Management Function Choice” menu option.
1. Turn the main power of the MFP on. If authentication is enabled, log in.
2. Insert the USB memory stick containing the Loadable Driver software into a USB Port.
3. Enter Service Mode on the MFP. If necessary, consult an authorized service technician for help
on entering Service Mode.
nd
4. Press the System 2 button; then press the Driver Install button on the 2 screen.
5. Press the Loadable Driver button; then press the Start button to start installing the data. A
confirmation message will appear.
1. Enter Service Mode on the MFP. If necessary, consult an authorized service technician for help
on entering Service Mode.
2. Choose “Firmware Version.”
3. Navigate to “Loadable Driver.”
4. Confirm that the “Loadable Device Driver -1” displays: A5C10Y0-A831-G20-00