Professional Documents
Culture Documents
Specifications
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Main
Product or component type Extended I/O card
Supply Internal supply for reference potentiometer, 10.5 V DC (10…11 V) , <0.01 A, impedance: 1…10 kOhm
for overload and short-circuit protection
Internal supply, 24 V DC (21…27 V) , <0.2 A for overload and short-circuit protection
Analogue input type AI3-/Al3+ differential current programmable: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms,
resolution: 11 bits + sign
AI4 software-configurable current: 0...20 mA, impedance: 250 Ohm, sampling time: 4…6 ms, resolution:
11 bits
AI4 software-configurable voltage: 0...10 V DC, 24 V max, impedance: 30000 Ohm, sampling time: 4…
6 ms, resolution: 11 bits
Analogue output type AO2 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms,
resolution: 10 bits
AO2 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms,
resolution: 10 bits
AO3 software-configurable current: 0...20 mA, impedance: 500 Ohm, sampling time: 4…6 ms,
resolution: 10 bits
AO3 software-configurable voltage: +/- 10 V DC, impedance: 470 Ohm, sampling time: 4…6 ms,
resolution: 10 bits
Discrete output type (LO3, LO4) assignable logic, sampling time: 4…6 ms, compatible with level 1 PLC
(R4A, R4B, R4C) configurable relay logic
Discrete input logic Negative (LI11...LI14), >= 16 V (state 0), <= 10 V (state 1)
Positive (LI11...LI14), <= 5 V (state 0), >= 11 V (state 1)
Positive (RP), < 1.2 V (state 0), >= 3.5 V (state 1)
Complementary
Electrical durability 100000 cycles for configurable relay logic
Feb 7, 2023 1
Minimum switching current 3 mA at 24 V DC for configurable relay logic
Maximum switching current Configurable relay logic 5 A at 250 V AC on resistive load, cos phi = 1
Configurable relay logic 5 A at 30 V DC on resistive load, cos phi = 1
Configurable relay logic 1.5 A at 250 V AC on inductive load, cos phi = 0.4 and L/R = 7 ms
Configurable relay logic 1.5 A at 30 V DC on inductive load, cos phi = 0.4 and L/R = 7 ms
Packing Units
Unit Type of Package 1 PCE
Offer Sustainability
Sustainable offer status Green Premium product
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is
known to the State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov
Contractual warranty
Warranty 18 months
Recommended replacement(s)
2
Feb 7, 2023