Professional Documents
Culture Documents
Copyright © Space Security Ltd, Tramigo, T23, T23 Fleet, TLD and associated logos are trademarks of
Space Security LTD. For more information, visit our website at www.spacesecurityng.com
1) TOP UP
Your T23 Fleet requires airtime to communicate location messages using the GSM network. Load at least N 1,500 to the device
SIM card number to be able to communicate with the device via SMS.
This can be achieved through VTU airtime transfer from ATM machines, which is the most reliable means. You can also transfer
credit from your MTN phone to the MTN SIM enabled device number through Share and Sell.
Before you can transfer credit, you have to change the default PIN of your phone number which is 0000.You can change the
default PIN by sending a text message with default PIN New PIN New PIN to 777. For example, to change the default PIN, send
an SMS with '0000 1234 1234' to 777.
With Share 'n Sell, you can transfer different amounts of credit, from a minimum amount of NGN50.00 to a maximum amount of
NGN5, 000.00 on each transaction. You can also transfer up to a total amount of NGN10, 000.00 every day by dialling
*600*Device SIM card Number*Amount*PIN# on your phone and then click on send/press ok.
“PASSWORD,0000,XXXX”
New password, up to
20 characters long do not use
spaces or symbols
Explore some of the most useful features of T23 Fleet. For the complete list of commands, check T23
Series Commands, available at www.spacesecurityng.com/downloads
ICONS FEATURES COMMANDS FUNCTIONS
Find FIND T23 Fleet sends its location
Your T23 Fleet replies with its current FIND,NEAR Sends 3 closest landmarks
location, speed and heading
Listen LISTEN Your T23 Fleet calls you back,
Your T23 Fleet calls you back. You and activates the external
can then answer the call and listen to microphone.
the vicinity of your vehicle.
Disable DISABLE,ON Turns off the ignition of your
Shuts down the ignition and vehicle
immobilizes your vehicle. DISABLE,OFF Turns the ignition of your vehicle
back on.
Motion Detection ALARM,ON Turns motion detection on
Warns you via SMS when your vehicle ALARM,OFF Turns motion detection off
moves or being tampered with.
Speed Limit SPEED,80 Sets speed limit to 80km/h
Alerts you if your vehicle exceeds the SPEED,OFF Turns speed alarm off
speed limit set for it.
Periodic Report FIND,10 Sends location every 10 minutes
Sends location at time or distance intervals. FIND,,2 Sends location every 2 kilometres
Commas separate time, distance and idle FIND,10,2 Sends both of the above
time
Trip Reporting TRIP,ON T23 Fleet sends a message when
Notifies you when your T23 Fleet starts a trip starts and ends
moving and when it completes a trip. TRIP,OFF Turns automatic trip reporting of
Add Custom Landmark ADDPLACE,Home Adds current location as "Home"
Lets you give a custom name for the DELPLACE,Home Deletes landmark named "Home"
units current location.
Zone Alarm ZONE,2,OFFICE T23 Fleet reports when unit
Automatically notifies when T23 Fleet ZONE,OFF enters/ exits within 2km of "office"
enters or exits a zone set for it. (requires landmark named "office")
Idle Alarm IDLEALARM,30 Sends message if vehicle has
Notifies you if the engine has been left been idle for 30 minutes
running while the vehicle is not moving. IDLEALARM,OFF Turns idle alarm off
1. REMEMBER TO SEPARATE COMMANDS AND PARAMETERS WITH A COMMA. Forward slash indicates command parameter
options.
2. Extra blanks should be ignored that occur before and after the command, and in placeName
For mobile phones, you can download M1 Move app from m.spacesecurityng.com for easy menu driven interface
HELP H / ? One time Guest Provides information on how to use a command.