Professional Documents
Culture Documents
1 General description
Designed to follow the NFC Forum standard for Wireless Charging this product is part of
a solution offering from NXP for wireless charging and wireless power transfer for low-
power application and small form factor devices.
NFC wireless charging solutions enable customers to remove plugs and cords from
their product. This facilitates new design flexibility, can make products smaller and more
compact in combination with completely new cool design options. The removal of plugs
and pins is an important step to make a product waterproof and seal it hermetically,
which in turn offers an unmatched level of quality and robustness.
In many customer applications, it is the combination of wireless charging with a
fast, bidirectional communication channel that makes the solution exciting. The
communication channel is perfectly suited to deliver charging control, device
authentication and pairing, software updates, logistic tracking and configuration at the
same time.
This NFC wireless charging communication receiver frontend supports storing of
configuration data, fast field detection to wake up the device and fast bidirectional data
transfer using SRAM and dedicated event detection line for synchronization.
In the figure below a typical NFC wireless charging system is illustrated including
CTN73x or CTN530 as transmitter. A detailed system view can be found in the AN12639.
AN12641 provides all needed system information from RF point of view.
CTNx CRN120
NFC charging transmitter NFC charging receiver
data power
power
BATTERY MCU
aaa-039625
2.3 Memory
• 1k bytes EEPROM
• 64 bytes SRAM volatile memory without write endurance limitation
• Data retention time of minimum 20 years
• EEPROM write endurance minimum 500.000 cycles
2
2.4 I C interface
2
• I C slave interface supports frequencies up to 400 kHz
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
2
• Fail-safe I C operation
2
• I C slave supports 7-bit slave address.
• 16 bytes (one block) written in 4 ms (EEPROM) or 0.4 ms (SRAM)
2.5 Security
• 32-bit password protection to prevent unauthorized memory operations from NFC
perspective
• SRAM password capability to protect bidirectional data exchange
• Protected data can be safeguarded against limited number of negative password
authentication attempts
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
3 Applications
NXP CRN120 is an NFC wireless charging communication receiver frontend IC that
enables charging and wireless power transfer in combination with a robust and proven
communication. Designed to follow the NFC Forum Standard for Wireless Charging this
product is part of a solution offering from NXP for wireless charging and wireless power
transfer for low-power application and small form factor devices.
The solution supports wireless charging and power transfer of
• small battery powered devices with small form factors with a power level <1 W
• hearable and audio devices (earbuds, hearing aids)
• computer accessories (stylus pen)
• wearable devices (wrist bands, fitness trackers, rings, smart watches)
• industrial devices (wireless connectors, sensors)
• medical devices (sensor, waterproof small devices)
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
4 Ordering information
Table 1. Ordering information
Orderable part Package
number
Name Description Version
CRN120H XQFN8 Plastic, extremely thin quad flat package; no leads; 8 terminals; body 1.6 x SOT902-3
1.6 x 0.5 mm; 1k bytes memory, 50 pF input capacitance; 4000 pcs. on 7''
reel
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
5 Block diagram
VCC GND FD
RF ARBITER/STATUS
INTERFACE REGISTERS I2C
CONTROL
EEPROM
LB ANTICOLLISION SCL
MEMORY
COMMAND INTERFACE
INTERPRETER SRAM
ED
aaa-035121
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
6 Limiting values
Exceeding the limits of one or more values in reference may cause permanent damage
to the device. Exposure to limiting values for extended periods may affect device
reliability.
[1] Stresses above one or more of the limiting values may cause permanent damage to the device.
[2] Exposure to limiting values for extended periods may affect device reliability.
[3] According to ANSI/ESDA/JEDEC JS-001.
[4] According to ANSI/ESDA/JEDEC JS-002.
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
7 Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe
precautions for handling electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5,
JESD625-A or equivalent standards.
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
8 References
[1] NFC Forum - Digital Protocol Technical Specification
https://nfc-forum.org/product-category/specification/
[2] NFC Forum - Type 2 Tag Technical Specification
https://nfc-forum.org/product-category/specification/
[3] NFC Forum - Wireless Charging Technical Specification
https://nfc-forum.org/product-category/specification/
2
[4] UM10204 I C-bus specification and user manual
https://www.nxp.com/docs/en/user-guide/UM10204.pdf
[5] XQFN8 - SOT902-3 package and soldering information
https://www.nxp.com/docs/en/package-information/SOT902-3.pdf
[6] AN1902 Assembly guidelines for QFN and SON packages
https://www.nxp.com/docs/en/application-note/AN1902.pdf
[7] AN12639 NFC wireless charging system guide
https://www.docstore.nxp.com/products
[8] AN12641 NFC wireless charging hardware development and RF configuration
https://www.docstore.nxp.com/products
[9] CTN530 NFC wireless charging transmitter frontend data sheet
https://www.docstore.nxp.com/products
[10] CTN730/CTN732 NFC wireless charging transmitter controller data sheet
https://www.docstore.nxp.com/products
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
9 Revision history
Table 3. Revision history
Document ID Release date Data sheet status Supersedes
CRN120_SDS v. 20210112 Product short data sheet -
3.0
Modifications: • First released "Product short data sheet"
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
10 Legal information
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term 'short data sheet' is explained in section "Definitions".
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple
devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
10.2 Definitions
Suitability for use — NXP Semiconductors products are not designed,
Draft — A draft status on a document indicates that the content is still authorized or warranted to be suitable for use in life support, life-critical or
under internal review and subject to formal approval, which may result safety-critical systems or equipment, nor in applications where failure or
in modifications or additions. NXP Semiconductors does not give any malfunction of an NXP Semiconductors product can reasonably be expected
representations or warranties as to the accuracy or completeness of to result in personal injury, death or severe property or environmental
information included in a draft version of a document and shall have no damage. NXP Semiconductors and its suppliers accept no liability for
liability for the consequences of use of such information. inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
Short data sheet — A short data sheet is an extract from a full data sheet risk.
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain Applications — Applications that are described herein for any of these
detailed and full information. For detailed and full information see the products are for illustrative purposes only. NXP Semiconductors makes
relevant full data sheet, which is available on request via the local NXP no representation or warranty that such applications will be suitable
Semiconductors sales office. In case of any inconsistency or conflict with the for the specified use without further testing or modification. Customers
short data sheet, the full data sheet shall prevail. are responsible for the design and operation of their applications and
products using NXP Semiconductors products, and NXP Semiconductors
Product specification — The information and data provided in a Product accepts no liability for any assistance with applications or customer product
data sheet shall define the specification of the product as agreed between design. It is customer’s sole responsibility to determine whether the NXP
NXP Semiconductors and its customer, unless NXP Semiconductors and Semiconductors product is suitable and fit for the customer’s applications
customer have explicitly agreed otherwise in writing. In no event however, and products planned, as well as for the planned application and use of
shall an agreement be valid in which the NXP Semiconductors product customer’s third party customer(s). Customers should provide appropriate
is deemed to offer functions and qualities beyond those described in the design and operating safeguards to minimize the risks associated with
Product data sheet. their applications and products. NXP Semiconductors does not accept any
liability related to any default, damage, costs or problem which is based
on any weakness or default in the customer’s applications or products, or
the application or use by customer’s third party customer(s). Customer is
10.3 Disclaimers responsible for doing all necessary testing for the customer’s applications
and products using NXP Semiconductors products in order to avoid a
default of the applications and the products or of the application or use by
Limited warranty and liability — Information in this document is believed customer’s third party customer(s). NXP does not accept any liability in this
to be accurate and reliable. However, NXP Semiconductors does not respect.
give any representations or warranties, expressed or implied, as to the
accuracy or completeness of such information and shall have no liability Limiting values — Stress above one or more limiting values (as defined in
for the consequences of use of such information. NXP Semiconductors the Absolute Maximum Ratings System of IEC 60134) will cause permanent
takes no responsibility for the content in this document if provided by an damage to the device. Limiting values are stress ratings only and (proper)
information source outside of NXP Semiconductors. In no event shall NXP operation of the device at these or any other conditions above those
Semiconductors be liable for any indirect, incidental, punitive, special or given in the Recommended operating conditions section (if present) or the
consequential damages (including - without limitation - lost profits, lost Characteristics sections of this document is not warranted. Constant or
savings, business interruption, costs related to the removal or replacement repeated exposure to limiting values will permanently and irreversibly affect
of any products or rework charges) whether or not such damages are based the quality and reliability of the device.
on tort (including negligence), warranty, breach of contract or any other
legal theory. Notwithstanding any damages that customer might incur for
Terms and conditions of commercial sale — NXP Semiconductors
any reason whatsoever, NXP Semiconductors’ aggregate and cumulative
products are sold subject to the general terms and conditions of commercial
liability towards customer for the products described herein shall be limited
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
in accordance with the Terms and conditions of commercial sale of NXP
agreed in a valid written individual agreement. In case an individual
Semiconductors.
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
Right to make changes — NXP Semiconductors reserves the right to applying the customer’s general terms and conditions with regard to the
make changes to information published in this document, including without purchase of NXP Semiconductors products by customer.
limitation specifications and product descriptions, at any time and without
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
No offer to sell or license — Nothing in this document may be interpreted applications and products. Customer’s responsibility also extends to other
or construed as an offer to sell products that is open for acceptance or open and/or proprietary technologies supported by NXP products for use
the grant, conveyance or implication of any license under any copyrights, in customer’s applications. NXP accepts no liability for any vulnerability.
patents or other industrial or intellectual property rights. Customer should regularly check security updates from NXP and follow up
appropriately. Customer shall select products with security features that best
Quick reference data — The Quick reference data is an extract of the meet rules, regulations, and standards of the intended application and make
product data given in the Limiting values and Characteristics sections of this the ultimate design decisions regarding its products and is solely responsible
document, and as such is not complete, exhaustive or legally binding. for compliance with all legal, regulatory, and security related requirements
concerning its products, regardless of any information or support that may
Export control — This document as well as the item(s) described herein be provided by NXP. NXP has a Product Security Incident Response Team
may be subject to export control regulations. Export might require a prior (PSIRT) (reachable at PSIRT@nxp.com) that manages the investigation,
authorization from competent authorities. reporting, and solution release to security vulnerabilities of NXP products.
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
Tables
Tab. 1. Ordering information ..........................................5 Tab. 3. Revision history ...............................................10
Tab. 2. Limiting values .................................................. 7
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
Figures
Fig. 1. NFC wireless charging system overview ...........1 Fig. 2. Block diagram ................................................... 6
CRN120 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved.
Contents
1 General description ............................................ 1
2 Features and benefits .........................................2
2.1 Key features ...................................................... 2
2.2 NFC interface .................................................... 2
2.3 Memory .............................................................. 2
2.4 I2C interface ...................................................... 2
2.5 Security .............................................................. 3
2.6 Key benefits .......................................................3
3 Applications .........................................................4
4 Ordering information .......................................... 5
5 Block diagram ..................................................... 6
6 Limiting values .................................................... 7
7 Handling information .......................................... 8
8 References ........................................................... 9
9 Revision history ................................................ 10
10 Legal information .............................................. 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.