eaten
in this document confidential andthe property of UOP LLC and rust not be daloned to others or reproduce in any manner or wed for any purpose whatsoever without it wrttn persion.
vop
LUOP LLC + 25 East Algonquin Rese + Des Pluines, Wine 60017-5047 + USA
‘STANDARD SPECIFICATION
B-1235-2 Page 1 of 2
pate | status | ApyD | AUTH
-20F thru 700°F /-29°C thru 371°C | Per ASME B16.5 for sizes to 24 inch and per ASME
PIPE CLASS
H1A2 yosePss] Revised | ARC | KAR
fentre Standard Specification
yhas been rewritten
Service Material and Flange Class _| Corrosion Allowance
General Process 5 Cr- V2 Mo Class 150 RF 0.125 inch (3.0 mm)
‘Temperature Range Pressure Range
B16.47 for sizes 26 inch and larger
Flanges
Gaskets
Fittings
ote 1)
Globe Valves
Gate Valves
Note 2)
Check Valves
Wafer
Check Valves
ASME Class 150 forged raised face. ASTM A 182 Grade F5.
1 V/2 inch and smaller socket weld.
2inch and larger welding neck bored to suit pipe.
Spiral wound in accordance with ASME B16.20 with flexible graphite filler.
11/2 inch and smaller forged socket weld. ASTM A 182 Grade F5.
2inch and larger welding same schedule as pipe. ASTM A 234 Grade WP5.
Branch connection welding fittings. ASTM A 182 Grade F5.
1.1/2 inch and emaller Class 800 forged socket weld, OSY, bolted bonnet.
ASTM A 182 Grade F5 body, 13 Cr trim, bardfaced seat, in compliance with
ASME B16.34.
Vogt series SW-12351 MOD., Bonney HL-36-SW, DSI 4211-B8, Velan W-2074B-04TY
or equal.
2inch to 6 inch Class 150 cast flanged, OS&Y, bolted bonnet. ASTM A 217 Grade C5
body, 13 Cr trim, hardfaced seat, in compliance with ASME B16.34.
Powell 1531-P140/P100-C5, Velan F-0074C-04TY, Poyam 6GBP-1R12 or equal.
1 V2 inch and smaller Class 800 forged socket weld, OS&Y, bolted bonnet.
ASTM A 182 Grade F5 body, 13 Cr trim, hardfaced seat rings, in compliance with
‘API 602.
‘Vogt series SW-12421, DSI 4111-B8, Velan W-2054B-04TY, Bonney HL-1¢-SW or
equal.
2inch to 24 inch Class 150 cast flanged, OS&Y, bolted bonnet, ASTM A 217 Grade C5
body, 18 Cr trim, solid wedge, hardfaced seat rings, in compliance with API 600.
Powell 1503-P140/P100-C5, Velan F-0064C-04TY, Poyam 6SBW-1R12 or equal.
1 V2 inch and smaller Class 800 forged socket weld. ASTM A 182 F5 body, 18 Cr trim,
bolted cap, balll check, hardfaced seat, in compliance with ASME B16.34.
Vogt series SWB-701 MOD., DSI 4511-B8, Velan W-2024B-04TY, Bonney HL-56-SW
or equal.
2 inch to 20 inch Class 150 cast flanged, bolted cap, swing check. ASTM A 217 Grade
C8 body, 18 Cr trim, hardfaced seat, in compliance with ASME B16.34.
Powell 1561-P140/P100-C5, Velan F-0114C-04TY, Poyam GRBC-1R12 or equal.
1 V2 inch and larger Class 150, 5 Cr-1/2 Mo body (ASTM A 217 Grade C5/A 182
Grade F5), dual plate design, 410SS plates and pins, 410SS overlay body seat, Inconel
X-750 springs, in compliance with API 594.
Crane Duo-Chek II G15 EPF-169, Goodwin B-150-P-E-E-E-R-Y-E or equal.
Fem oe‘Not; The information in this document is conidental aa the property of UOP LLC and must not be dncloed te there or reproduced in any manner outed for any purpose whatsoever withot ia writen permission.
vop
UOP LLC » 25 East Algonquin Road « Des Psines,iinis 60017-5017 USA
- STANDARD SPECIFICATION
B-1235-2 Page 2 of 2
pate | status | apvo | aurHo
PIPE CLASS:
WIA Pea er ota
Bolting
Pipe
Notes:
Manufacturer or Equal:
Stud bolts ASTM A 193 Grade B7 threaded full length with 2 ASTM A 194 Grade
2H nuts.
ASTM A 335 Grade P5 seamless.
Contractor to calculate wall thickness. However, minimum wall thickness for
2 inch and smaller piping system shall be no less than Schedule 160.
Acceptable material for 16 inch and larger welded pipe shall be in accordance with
ASTM A 691 Grade 5 Cr Class 22.
1. Class 3000 for Schedule 80 pipe.
Class 6000 for Schedule 100 or greater pipe.
2. For drain and vent connections 3/4 inch forged valves shall have one end socket
weld and the other end threaded.
‘Vogt TSW- 12421, DSI 4111-B8, Velan C-2054B-04TY or equal.
Bonney, Crane, DSI, Goodwin, Pacific, Powell, Poyam, Velan, Vogt