Idieton
‘ete‘The infermotion in this document ie confdenil andthe property of VOP LLC and mast note dnloned to ethers r reproduced in ny manner or used fr any purpoee whatsoever witht ita writen permiasion
uvop
UOP LLG +28 Eest Algonquin Read Des Pines, Hinois 60017-5017- USA
STANDARD SPECIFICATION
8-1245-1 Page 1 of 14
ape REV] DATE | STATUS | APPROVED AUTHORIZE:
a +| -vz7e6 |Rewiten| anc | KAR
Service Material and Flange Class | Corrosion Allowance
Corrosive Process ‘TP 304 Class 150 RF 0.068 inch (1.5 mm)
‘Temperature Range Pressure Range
"2UF thra 500F /-20°C thru 260°C _| Per ASME B16.5 for sizes to 24 inch
Flanges
Gaskets
Fittings
Globe Valves
Gate Valves
Check Valves
Bolting
Pipe
ASME Class 150 forged raised face. ASTM A 182 Grade F 304.
1 1/2 inch and smaller socket weld.
2 inch to 24 inch welding neck bored to suit pipe.
Spiral wound in aecordance with ASME B16.20 with flexible graphite filler.
1 V2 inch and smaller Class 3000 forged socket weld. ASTM A 182 Grade F 304.
2 inch and larger welding same schedule as pipe. ASTM A 403 Grade WP 3048,
‘WP 804WK or WP 304WU. :
Branch connection welding fittings. ASTM A 182 Grade F 304.
1/2 inch and smaller Class 800 cast or forged socket weld, OS&Y, bolted bonnet.
ASTM A 851 Grade CF8 or ASTM A 182 Grade F 304, in compliance with
ASME B16.34.
DSI 4211-L2, Pacific 3669-10H-CF8, Cooper 4301% or equal.
2 inch to 6 inch Class 150 cast flanged, OS&Y, bolted bonnet.
ASTM A 351 Grade CFS, in compliance with ASME B16.34.
Poyam 10GBP-1R10, OIC 04 152 or equal.
1 V2 inch and smaller Class 800 cast or forged socket weld, OS&Y, bolted bonnet.
ASTM A 351 Grade CF8 or ASTM A 182 Grade F 304, in compliance with API 602.
DSI 4111-L2, Pacific 3656-10H-CF8, Cooper 3381X or equal.
2 inch to 12 inch Class 150 cast flanged, OS&Y, bolted bonnet.
‘ASTM A 351 Grade CF8, in compliance with API 600.
Poyam 10SBW-1R10, OIC 04 151 or equal.
1 U2 inch and smaller Class 800 cast or forged socket weld. ASTM A 351 Grade CF8 or
ASTM A 182 Grade F 304 bolted cap, ball check, in compliance with ASME B16.34.
DSI 4511-2, Pacific 3682-10H-CF8, Cooper 2301X or equal.
2inch to 12 inch Class 150 cast flanged ends, bolted cap, swing check.
ASTM A 361 Grade CF8, in compliance with ASME B16.34.
Poyam 10RBC-1R10, OIC 04 158 or equal.
Stud bolts ASTM A 198 Grade B7 threaded full length with 2 ASTM A 194 Grade
2H nuts.
ASTM A 312 Grade TP 304 seamless.
Contractor to calculate wall thickness. However, minimum wall thickness for 2 inch
and smaller piping system shall be no less than Schedule 80S.