Professional Documents
Culture Documents
Subject FDR nano/FDR AQRO (DR-XD 1000) :Releasing Service Manual (5th edition)
Date 2018/11/27
Affected Products
DR-XD1000
Scope of Application
Content
Action
Not Required(infomation only)
Content
Time Frame
Next Maintenance,Upon Failure,Other
Content
At installation
Completion Deadline
N/A
Notes
ECN-000969 1/ 2
Implementation H
Completion H
Charge
Not Applicable
Affected Documents
Yes
Content
DR-XD 1000 Service Manual 018-241-05E
Description Of Change
Content
We are releasing the 5th edition of the Service Manual for FDR nano/FDR AQRO (DR-XD 1000).
Name/Code
DR-XD 1000 Service Manual / 018-241-05E
Quantity
Download from SIAS
Details
*Refer to the attachment for details.
SIAS Published
WW
Content
ECN-000969 2/ 2
393C193133E74174A925F6749354121A.xls
【Revision list】
Section Chapter Revision
Added descriptions for X-ray tube device label and
2. Labels
Safety Precaution rating/standard/identification label for the other overseas switching
2.1 Rating Indication Labels and Caution
(Safe) machine
Labels
Added label of In-vehicle kit (option)
Added the description for the Wet tissue holder
Product Specifications 1. Commodity Composition and
Added NOTE for the Area dose meter fixation kit
(Spec) Optional Items
Added the In-vehicle kit
Added NOTE for the "Collimator installation reference surface"
2. Weight and Dimensions
Added the dimensions of carry cart
Added the description for FUJIFILM-made AP
8. Other Specifications Added the Bluetooth BCR and Bluetooth USB Adapter Selection
Standards
9. Supported Disinfectants Added REFERENCE for the DR-ID 12xxSE.
Machine Description
1.2 System Configuration Examples Added NOTE for DR-ID 1200MC
(MD)
2. Block Diagram Updated to block diagram and signal diagram of new configured machine
5. Changes in PC-GNC Connection
Revised NOTE for new configured machines
Specifications
7. Handling the SE Battery Newly added
8. Setting the mAs Value Newly added
9. Software Overview Newly added the description for GNC Software and MC Software
Appendix 1. Block Diagram (For Older
Moved block diagram of older configuration machine from MD main part.
Configured Machines)
Revised the description for "Battery log: BT"
Troubleshooting (MT) 1.4 How to Use the Cart Part Log
Added "1.4.1 Example of Log Analysis"
Revised Checks and Workarounds on aging for the cart unit error
2. Error Code Table Add the description of all the error codes for the MC error
Added MC Manager error code
For each phenomenon occurring in the DR-XD 1000, sorted causes and
3. Troubleshooting
remedies in the table
Added "4.7 If the SE Cannot Be Charged", "4.8 If Irradiating Cannot Be
4. Parse Tree
Done", "4.9 When the Caster Lock Pedal Does Not Rise All the Way Up"
5.1 GNC board IP Address Resetting
Added note when using RU PC-TOOL
Procedures
6. Troubleshooting from FUJIFILM-made AP Added NOTE on password input at login
Log Added the description for checking DFS operation
Appendix 1. Aging Added "Warm-up aging log example".
Added the isolation flow
Appendix 2. 10753 Error Countermeasures Revised phenomenon and countermeasure
Added "3. Confirming Analysis via the Log"
Added the description for the structure of log file acquired by DR
Appendix 3. Procedures for Acquiring the Logs
maintenance tool
Appendix 4. How to Obtain the Image Files
Newly added
When There are A Abnormal Images
Appendix 5. Analysis Procedures When 11240
Line Disconnecting Errors Occur in Wireless Newly added
Communications
Appendix 6. Windows OS Recovery Procedures
Newly added
Using a System Repair Disc
Appendix 7. How to Handle a 1-LAN Port
Newly added
Which Was Set for a 2-LAN Port Configuration
Checks, Replacement
and Adjustment of ALL Revised screws for all items.
Parts (MC)
2.7 Left-side Cover (INV Board Side) Added NOTE for installing sequence for the screws
2.23 Caster Added the replace procedure for the new caster
2.24 Panel Lock Assembly Added NOTE before removal and for removal units.
2.30 AC Inlet Cover Assembly Newly added
2.31 DR Slot Base Cover Newly added
Revised the procedure.
3.1 Battery Assembly
Revised the check item after installation.
3.5 FET Board Revised INSTRUCTION for installation torque
3.6 INV Board Revised INSTRUCTION for installation torque
Added the description for the new type construction parts of the guide
4.1 Guide Rails rail.
Added NOTE for installation.
4.10 Arm Lock Release Handle Assembly Newly added
5.7 Operation Panel Relay LAN Connector Kit Newly added
6.8 LED Board Assembly Revised the description on increase and decrease the size of the light
Added NOTE for applying the screw lock during installation
6.10 Collimator Assembly
Revised NOTE for applying the grease during installation
1 / 3 ページ
393C193133E74174A925F6749354121A.xls
Added descriptions for "The label is required when purchasing the mono-
7.1 Top Cover of Mono-tank
tank top cover"
Added NOTE for applying the screw lock during installation
Revised INSTRUCTION for installation torque
7.7 Mono-tank Assembly
Added NOTE that the number of clamps is different depending upon the
machine.
Revised INSTRUCTION for installation torque
7.10 Torque Hinge (Large) Added NOTE when loosening the screws for attaching the torque hinge
(large) and the bracket
8.2 Panel Approaching Unit Added NOTE for installation.
8.3 Roller Assembly Added NOTE for installation.
8.6 SE Charging Terminal Assembly Newly added
8.7 DSC65A Board Assembly Newly added
8.8 DR Slot Housing Newly added
8.9 DR Slot Securing Member Newly added
8.10 DR Slot Damper Newly added
8.11 ESD67A Board Newly added
Appendix 1. Setting Country Code for the
Added requirements for setting the FUJIFILM-made AP country code
FUJIFILM-made AP
Added NOTE for the country code for the MC V16.5 or later along with
Appendix 2. Changing the SE Country Code
change in communication method between MC and SE
Appendix 5. Backup/Restoration for Windows 7 Added NOTE when "System restore disc" is available
Newly added the following replacement procedure
- Brake Wire
Appendix 10. Carry Cart - Brake Lever
- Disc Brake Caliper
- Wheel Assembly
Newly added
Appendix 11. Updating MC Software Version
(Including VA expanded security compliant)
Maintenance Utility
3.10 Adjusting the Filament Preheating Voltage Added NOTE when the exposure switch is released part way through
(MU)
5.9.10 Install SE CPU (0x0220) Newly added
5.9.11 Replace MP Revised the procedure
5.9.13 Battery Threshold Setting Newly added
5.10.6 LOG Backup Added the description for the log
6. Smart Log Acquisition Tool (SLAT) Newly added
Revised the parts and circuit diagrams to the latest information
Added the references of replacement procedure for each part
Service Parts List (SP)
Revised "List of Service Parts for Securing and Wiring" and "Table of
Screws / Washers Indication Symbols"
18A
Newly added
Parts that Need Labels (For USA)
18B
Parts that Need Labels (For Overseas Other Newly added
than USA)
Preventive
3. Removing the Cover Revised the procedures for the second and fourth years
Maintenance(PM)
4.1 Checking the Cart Handle Added the check item
4.2 Checking the Casters Added descriptions for non-slip sheet
4.4 Replacing the Monitor Arm Added the check item
4.8 Checking the Arm's Horizontal Rotation Added the check item
4.9 Checking the Arm's Center Pin Receiver Added the check item
4.13 Checking the Swiveling Mechanism Newly added
4.14 Checking the Battery’s Tightness Newly added
4.15 Checking the Round Terminal of the
Newly added
INV/FET Board
7.2 Checking the Rotation Added the check item
8. Installing the Cover Revised the procedures for the second and fourth years
10.3 Adjusting the Filament Preheating Voltage Added NOTE for the exposure switch
11. Visual Inspection and Cleaning Added cleaning place
2 / 3 ページ
393C193133E74174A925F6749354121A.xls
3 / 3 ページ