You are on page 1of 7

See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/282493539

Disaster Resistant Rural House Design For Low Income People

Article · January 2010

CITATIONS READS
4 1,387

2 authors:

Mahendran Kandhasamy Zahir Hussain


Gandhigram Rural Institute Veerammal Engineering College
17 PUBLICATIONS   99 CITATIONS    1 PUBLICATION   4 CITATIONS   

SEE PROFILE SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Malady-Remedy Analysis of Stabilized MUD Blocks based Structures with a focus on Development of Affordable hazard-Resistant Housing Strategies View project

Concrete Technology-Geopolymer Concrete. View project

All content following this page was uploaded by Zahir Hussain on 04 October 2015.

The user has requested enhancement of the downloaded file.


INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL 
Volume 1, No1, 2010 

© Copyright 2010 All rights reserved Integrated Publishing Association 

REVIEW ARTICLE                                                                                                        ISSN ­ 0976­4259 

Disaster Resistant Rural House Design For Low Income People 
K.Mahendran 1  A.Zahir Hussain 2 
Department of Civil Engineering and rural technology, 
Gandhigram Rural University, Dindigul 
zahircivil@rediffmail.com 

ABSTRACT 
India  has  been  facing  natural  disasters  like  drought,  flood,  cyclone,  storm  surge  and 
earthquake  every  year  in  different  parts  of  the  country.  These  disasters  cause  large  scale 
damages,  destructions,  death,  injuries  to  human  and  animals.  The  non  engineered  houses 
constructed  by  the  people  are  mostly  damaged  due  to  lack  of  technical  guidance  and 
affordability.  Considering  the  growth  of  non  engineered  housing,  and  the  damage  level  of 
housing due to disasters, it is essential to develop a appropriate housing model which resists 
the disaster forces. This paper describes the method of  constructing rural housing using low 
cost techniques. 
Keywords: Rural housing, earthquake resistant structures, disaster. 

1. Introduction 
India  has  been  facing  natural  disasters  like  drought,  flood,  cyclone,  storm  surge and 
earthquake  every  year  in  different  parts  of  the  country.  These  disasters  cause  large  scale 
damages,  destructions,  death,  injuries  to  human  and  animals.  The  non  engineered  houses 
constructed  by  the  people  are  mostly  damaged  due  to  lack  of  technical  guidance  and 
affordability.  Considering  the  growth  of  non  engineered  housing,  and  the  damage  level  of 
housing due to disasters, it is essential to develop a appropriate housing model which resists 
the disaster forces. This paper describes the method of  constructing rural housing using low 
cost techniques. 
2. Problems on Rural Housing 
The rural houses are predominantly built with the locally available materials like  mud, 
bamboo, tiles and thatches. These materials are not durable and get damaged due to  heavy 
rain  and  wind blows.  The  projected  eaves  of  the  roof  are  also damaged  due  to  heavy  wind 
velocity.  During  cyclone  the  pyramidal  shape  roofs  are  damaged  due  to  uplift  forces 
developed by  cyclone  .The  light  roof  structures having  inadequate  “J” bolts  and  absence  of 
wind bracing and lack of ties, inadequate sheet thickness, fastening and insufficient frequency 
of the fasteners contribute  to the damages, even the permanent houses constructed with RCC 
and brick walls are also affected due to the excessive corrosion of steel in the structures .The 
roof  slab  having  inadequate  thickness  of  roof  concrete  and  low  self  weight  which  causes 
tension at the top due to the suction effect of the wind in  where hair line cracks developed, 
These RC concrete exposed to the 
atmospheres are getting rusted and ultimately causes roof in to collapse. The unsymmetrical 
houses have shown heavy damages when it compared to symmetrical plan about its both axis. 
The  effects  of  wind  tunnel  on  the  streets  and  housing  plan  arrangements  are  the  factors  to 
decide the damage level during disasters. The unreinforced masonry walls are also fails due 
to excessive tension. Some times the timber rafter are destroyed by the white ants and losses 
its section and leads to collapse at the time of disasters. The unscientific installation of roof 
tiles, the doors and windows latches, hinges and bolts are vulnerable hardware and fasteners

77 
INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL 
Volume 1, No1, 2010 

© Copyright 2010 All rights reserved Integrated Publishing Association 

REVIEW ARTICLE                                                                                                        ISSN ­ 0976­4259 

during  the  disaster.  The  cantilever  parapets  and  the  light  weight  verandah  roof,  improper 
connections of walls with footings are the most susceptible to high speed wind. The sitting of 
building on the terrain conditions like hills, valley, ridges in the windward side, leeward side 
are the  factors influencing the damage level of structure. 
1.3 Basic Requirment Of Cyclone Resistant Buildings 
Based on the above facts the housing plan, design and executions should be carried out 
considering the following. 
1.  Avoid a low pitched roof 
2.  Use of Hip roof (or) High Pitched gable roof 
3.  Avoid over hanging roofs. 
4.  Cyclone shutters to be introduced in the opening places. 
5.  Minimize the projection of eaves. 
6.  Recommended steel reinforcement should be provided in the wall as seismic band 
in vertical and horizontal directions. 
7.  The  foundation  of  the  building  should  be  designed  by  taking  bearing  capacity 
under the soil strata conditions and also checked the uplift pressure. 
8.  The wall should resist the horizontal forces developed by cyclone. 
9.  The  joints  are  the  vulnerable  points  should  be  properly  designed  and  inter 
connection is essential. 
10. The  self  weight  of  roof  should  be  increased  to  counteract  the  uplift  pressure 
developed by the cyclone, the structural components inter connected and anchored 
with the foundations so that the entire building should be act as one unit. 
11. The over hanging roofs eves projections are restricted. 
12. The sloped roof is preferable rather than flat roof and low pitched  roof are to be 
avoided 
13. In the costal area the steel section should be protected from corrosion and use the 
anti  corrosion  reinforcement  for  the  buildings.  The  cover  for  the  reinforcement 
and quality of concrete are ensured for durability. 
1.4 Design Of Model Rural House 
While designing  the socio economic status, present  living pattern, traditional shape 
of  existing  the  structures,  type  of  labours  and  materials  availability  are    considered  for 
developing a house design, 
Plan Form:
·  Simple  square  /  rectangle  plan  has  been  adopted  in  the  design.  A  square 
symmetrical and compact plan form is more stable than a zig­ zag plan, and is 
less prone to wind cyclone damages.
·  The plan provides an inviting entrance verandah units a seat out, leading to the 
multipurpose living room which is also generally used for storing cloths, 
house hold utensil etc.
·  The kitchen is attached to the rear side but do not have a door.
·  A toilet at back yard has been proposed and separated form the main house. 
Foundation: 

Strip footing with RC band of 100mm thick to the width of brick masonry is to be 
provided all along the portion and connected to the RC Band. 
Grade Beam 230mm x 75mm has been provided at the ground level and plinth beam 
has been provided at the plinth level in the design.

78 
INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL 
Volume 1, No1, 2010 

© Copyright 2010 All rights reserved Integrated Publishing Association 

REVIEW ARTICLE                                                                                                        ISSN ­ 0976­4259 

The vertical reinforcement (anchorage bars of 10mm rod) at the corners and jams of 
doors and windows has been provided from the ground level beam. 
Walling: 
The exterior brick walls are provided with horizontal and vertical reinforcing bars 
connected with concrete band to resist the horizontal pressure and continuous lintel beam has 
been provided. The height of the building kept as 3000mm. 
Roofing: 
As  per  the discussion  on  the  failure of buildings  during  the  disasters,  the  suction  on 
flat roof is much more than sloping roof and many of the roof structure are fail is due to their 
less weight and poor anchorage. The pyramidal or hipped roof having symmetrical slope on 
both  areas  are  flat  roof  with  more  self  weight  are  the  appropriate  solution  for  the  roof. 
Therefore 100thick reinforced concrete slab with M20 grade are suggested. 

Table1: Specification Details of model houses. 


TYPE  FOUNDATION  WALLING  ROOFING 
MODEL 1  Strip Foundation  English Bond wall  R.C.C. Slab 
MODEL 2  Strip Foundation  Rat ­ Trap bond  Brick Panel 
wall 
MODEL 3  Strip Foundation  Stabilized Mud  Ferro Cement 
Block  Channel

79 
INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL 
Volume 1, No1, 2010 

© Copyright 2010 All rights reserved Integrated Publishing Association 

REVIEW ARTICLE                                                                                                        ISSN ­ 0976­4259 

MODEL 1 

230.00 

2700.00 
FLOORING CONCRETE 
SAND FILLING 

600.00 
G.L  G.L 150 
150 
150 
100 

ELEVATION  SECTION ON A ­  A 

W  AREA OF THE BUILDING:     30.23SQM 
230.00 
D1 
BED ROOM  TOILET 
3000 x 2400  3000 x 1200  J1 

3000  SCHEDULE OF JOINERY 

A  A 
5075.0 
D            ­  DOOR               900 X 2000 
CUP BOARD 
115 
D1          ­  DOOR               750 X 2000 
KITCHEN  W 
O  HALL  W           ­  WINDOW          900 X 1200 
1500 
J  1500 x 2400  3000 x 3300 
J             ­  R.C. JALLY       900 X 600 
230 

2400.00  3000.00 
J1           ­ R.C. JALLY         600 X 600 
230.00  115.00 

5975.00 

PLAN 

Figure 1: Plan showing the first type of proposed model

80 
INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL 
Volume 1, No1, 2010 

© Copyright 2010 All rights reserved Integrated Publishing Association 

REVIEW ARTICLE                                                                                                        ISSN ­ 0976­4259 

MODEL 2 

230.00 

2700. 00 
FLOORING CONCRETE 
SAND FILLING 

600.00 
G.L  G.L  150 
150 
150 
100 

ELEVATION  SECTION ON A ­  A 

W  AREA OF THE BUILDING:     30.23SQM 
230. 00 
D1 
BED ROOM  TOILET 
3000 x 2400  3000 x 1200  J1 

3000 
SCHEDULE OF JOINERY 
D
A  A 
5075.0 
D            ­  DOOR               900 X 2000 
CUP BOARD 
115  D1          ­  DOOR               750 X 2000 
KITCHEN  W 
1500 x 2400  O  HALL  W           ­  WINDOW          900 X 1200 
1500  J 
3000 x 3300 
J             ­  R.C. JALLY       900 X 600 
230 

2400.00  3000.00 
J1           ­ R.C. JALLY         600 X 600 
230.00  115. 00 

5975.00 

PLAN 

Figure 2: Plan showing the second type of proposed model 

MODEL3 

230.00 

FERRO CEMENT CHANNELS 

2700.00 
FL OORING CONCRETE 
SAND FILLING 

600. 00 
G.L  G.L 150 
150 
150 
100 

ELEVATION  SECTION ON A ­  A 

W  AREA OF THE BUILDING:     30.23SQM 
230.00 
D1 
BED ROOM  TOILET 
3000 x 2400  3000 x 1200  J1 

3000  SCH EDULE OF JOINERY 
D
A  A 
5075.0 
D            ­  DOOR               900 X 2000 
CU P BOARD 
115 
D1          ­  DOOR               750 X 2000 
KITCHEN  W 
1500 x 2400  O  HALL  W           ­  WINDOW          900 X 1200 
1500 
J  3000 x 3300 
J             ­  R.C. JALLY       900 X 600 
230 

2400. 00  3000.00 


J1           ­ R.C. JALLY         600 X 600 
230.00  115. 00 

5975. 00 
PLAN 

Figure 3: Plan showing the third type of proposed model

81 
INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, DINDIGUL 
Volume 1, No1, 2010 

© Copyright 2010 All rights reserved Integrated Publishing Association 

REVIEW ARTICLE                                                                                                        ISSN ­ 0976­4259 

3. Results and Discussion 
The above shown plan are some of the proposed plans that can be used while 
constructing houses in the areas of disaster prone zones. This will not only safeguard the 
structure but also will save lot of peoples lives. Rural technology Center of Gandhigram 
University is conducting lot of research works in the areas of rural construction, this type of 
model houses were constructed and tested in our campus. 

4.References 
1.  Guidelines for cyclone resistant construction of Buildings in Gujarat, Gujarat State 
Disaster management Authority, Government of Gujarat. December  ­ 2001 
2.  Guidelines for reconstructions of housed affected by Tsunami in Tamil Nadu –by A.R. 
Santha Kumar et al September 2005. 
3.  I.S. 456 – 2000 Code of  Practice for Plain and Reinforce Concrete – Code of practice. 
4.  International Association for Earthquake Engineering TOKYO “ The Guidelines for 
Earth quake Resistant Non – Engineered Construction “ A.S. ARYA , et al October 
1986, Reprint by Indian Society of Earthquake Technology, Roorkee 247667.. 
5.  Improving wind/cyclone Resistant buildings Guidelines by A.S. Arya  et al ­ 1999

82 

View publication stats

You might also like