Professional Documents
Culture Documents
1 Preparation
The following procedure shows how to upgrade an application program.
Upgrading a boot program takes same process, too.
1.1 Connecting
When upgrading a program, connect PC to the FAX-30 through the HUB via the
LAN cable.
1/4
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
2 Upgrading procedure
Make sure to execute CLEAR MEMORY and check a detailed program version
information whenever upgrading a program.
Procedure
1. Connect PC and FAX-30 through HUB with LAN connection.
2. Open an application program folder of FAX-30.
3. Click a SETUP batch file, and DOS prompt display will show up.
2/4
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.
Executing CLEAR MEMORY
7. Start a LAN connection between FAX-30 and PC, and “Top display of FAX-
30”will show up.
8. Select CLEAR MEMORY in WX FAX or SYSTEM SETUP of NAVTEX and
execute “CLEAR ALL MEMORY”.
Turn on S1-#2
Upper: 0850188-01.0x
Boot program No.
Lower: 0850189-04.0x
Application program No.
4/4
CONFIDENTIAL (internal use only)
This confidential document is used only by FURUNO authorized persons.
It is strictly prohibited to reproduce the document in whole or in part without prior written permission of FURUNO.