Professional Documents
Culture Documents
Edition: 24.10.2021
Lightscan Façade luminaires
1 1
2 2
5
Structure and characteristics 1 ERCO Spherolit lens 4 Housing and wall plate Variants on request
The features described here are typical – Light distributions: wide beam or – Graphit m – High-power LEDs: 3000K CRI 97 or
of products in this range. Special ver- deep beam – Corrosion-resistant cast aluminium, 2700K, 3500K, 4000K with CRI 92
sions may offer additional or varying No-Rinse surface treatment – Housing: 10,000 further colours
features. A comprehensive description 2 ERCO LED-module – Double powder-coated Please contact your ERCO consultant.
of the features of individual products – High-power LED: warm white – Optimised surface for reduced accu-
can be found on our website. (3000K) or neutral white (4000K) mulation of dirt
– Collimating lens made of optical
polymer 5 Control gear
– Switchable or DALI dimmable
3 Cover frame
– Cast aluminium, black powder- Protection mode IP65
coated Dust-tight and water jet-proof
– Safety glass
2
Lightscan Façade luminaires
Large lumen packages for very Different light distributions: wide Wide luminaire spacing with
high illuminances or deep ceiling washlighting
ERCO offers luminaires with large The wide light distribution of ERCO’s efficient photometrics
lumen packages for generating ceiling washlights efficiently illu- enable selected luminaires to
very high illuminances. minates cantilever roofs along the be spaced particularly far apart,
facade. The deep beam light distri- thereby minimising the number of
bution of ceiling washlights is ideal luminaires required.
for the wide-area illumination of
ceilings.
Large lumen packages for Efficient Spherolit techno- EMC-optimised DALI dimmable
very high illuminances logy
3
Lightscan Façade luminaires – Luminaire arrangement
Ceiling washlights Washlighting
Wide beam, Deep beam Uniform illumination using Light-
scan gives a light and spacious
impression to ceilings. The distance
(a) of the luminaire to the ceiling
determines the luminaire spacing
(d) and depends on the design cri-
teria. This distance (a) should be at
least 0.8m.
Arrangement: a > 0.8m
4
5
Lightscan Façade luminaires
Construction size 299 250mm 349 300mm
99
99
LED module
Maximum value 24W/3300lm 48W/6600lm
at 4000K CRI 82
Light colour
2700K CRI 92 * 3500K CRI 92 * 2700K CRI 92 * 3500K CRI 92 *
Light
distribution Ceiling washlights Ceiling washlights
Control
Switchable Switchable
DALI DALI
Colour (housing)
Graphit m Graphit m
6
399 350mm
350 350
99
72W/9900lm
Ceiling washlights
Wide beam
Deep beam
Switchable
DALI
Graphit m
10,000 colours *