Professional Documents
Culture Documents
COURSE PROJECT
TECHNICAL
SOLUTION
GROUP: - 9
DIV: - I
GROUP MEMBERS: -
47) TARUN KASLIWAL
48) MANAS KASODEKAR
49) SOHAM KASURDE
50) SIDDHANT KASWA
51) VEDANT KATE
52) YASH KATE
AIM: -
To solve problem of neck bending to talk on phone call while driving
two-wheeler.
Description:
The design is integrated with the helmet and doesn’t require any
external set-up.
The Helmet can accommodate a phone size of maximum 7
inches.
The slot on the helmet will automatically adjust to the size of the
phone so that the phone doesn’t fall during the ride.
There will be a mesh on the inside of the helmet that will allow
the rider to talk on the phone without any interruption and with
full clarity.
For additional safety the slot will have a strap over the phone so
that it doesn’t fall during the ride.
The user can attach their phone to the slot when a call comes
and ride without any hesitation.
There will be foam on the bottom of the slot so that the wind
noise doesn’t disturb the call clarity.
PRODUCT DISCRIPTION
I. Sizes:
-Will be available in all sizes: Small, Medium, Large
II. Dimension-
1. Head circumference: -
Small- (13-14Cm).
Medium- (57-58cm)
[Large (59-60 cm)
X-Large (61-62cm)
2X-Large (63-64 cm)
Features:
-Easy to access.
-Sensor have assists so you can call back.
-Volume is easily increased and decreased using sensor.
-NFC's Tag can connect easily to a device in a single go.
-Elastic straps to easily access device and its light weight.
Working: -
-Phone directly fits in slot.
-NFC's tag will connect sensor easily.
Sensor will be activated on a touch and can be easily used for picking
& declining phone calls, increasing volume, decreasing volume.
SENSOR: -
-Scroll up to pick call
-Scroll down to decline call
-Double tap to increase volume
-Triple tap to decrease volume.
As phone is removed it will shut down sensor automatically.
NOTE: -
It is easy to ACCESS
CONCLUSION: -
This product we designed is very simple to manufacture
and will be the best solution for neck bending problems.