You are on page 1of 2

ALBERTA-80-COINS

UV-Resistance PVC Soft Tape

www.canadianpowermfr.ca Page 1/2


DESCRIPTION PRODUCT PROPERTIES

ALBERTA-80-COINS UV-resistance PVC soft - Branding: Canadian Power Manufacturing


tape is a 0.25mm premium quality, - ASTM D4325-13:
professional grade, electrical self- Thickness: 0.0078-in., 0.0098-in.
extinguishing soft PVC tape which uses an Length: 21.87-yd., 54.68-yd.
aggressive pressure sensitive rubber-based Width: 0.75-in., 0.98-in., 1.5-in.
adhesive system. It has been designed for Minimum Breaking Strength: 3.19 lb-in.
use where a recognised specification or Elongation at break point: 255%
international standard is a must and where Dielectric @ dry: 636.95 V/mil
environmental safety is a concern. Dielectric @ wet: 634.75 V/mil
- ASTM D4388-13:
APPLICATIONS Temperature Rate @ Normal: 90ºC
UV Ageing Resistance: Pass
- Primary electrical insulation - ASTM D1000-17:
- Harnessing Flammability: Pass
- Protection for low and medium voltage - ASTM ISO4892-2:
cables splices Xenon Ageing: Pass
- Typically engineered for the
professional requirements of telecom RECOMMENDATIONS
and electricity boards
- Automotive electrical wire harness Care should be taken to avoid direct
wrapping contact between the tape and petroleum‐
type solvents and oils. Oils may affect
PRODUCT BENEFITS the electrical properties of the tape.
The rolls should be stored flat on their
Some of the features and benefits of using cut edges in the original packaging. The
ALBERTA-80-COINS UV-resistance PVC soft product must be protected from dust, heat,
tape are: moisture, direct sunlight and solvent
- Excellent resistance to abrasion, fumes. Storage temperature between +10°C
corrosion and moisture High dielectric and +30°C.
strength and mechanical protection Under these conditions, the storage life
- Excellent conformability of the tape in a temperate climate will be
- Suitable for indoor and outdoor at least five years.
applications
- Tape can be applied at low temperature
(till ‐10°C)
- Provides higher voltage break‐down and
mechanical protection.
- Conforms to the European Directive
2011/65/EC (RoHS 2) and Commission
Delegated Directive (EU) 2015/863 (RoHS
3)
- Complies to REACH
- Index temperature 0°C to 90°C according
to IMQ and VDE Approval Certificates
- IMQ and VDE Approval Certificates
according to IEC 60454‐3‐1
- Operating temperature resistance
between –40°C to +105°C on harness
according to Automotive OEMs’
specifications

www.canadianpowermfr.ca Page 2/2

You might also like