Professional Documents
Culture Documents
A. Eligibility
1. Machine Design 2021 is open for all JPSME Cavite Chapter members.
2. Participants must be registered to the General Assembly: Make it Happen
B. Guidelines
1. Each campus must have one (1) team consists of five (5) members.
2. Each team must design a low-cost functional machine.
3. Each team must utilize at most ten (10) materials; 6 general materials and 4 materials of
the team’s choice.
General Materials:
a. Steel
b. Plastic
c. Rope/Yarn/Straws
d. Wood
e. Rubber
f. DC Motor
C. Registration
1. Register here: https://docs.google.com/forms/d
e/1FAIpQLSejSAuu1U7R1QV3zezvWf1q0K3M_vOB-cNpOn31K8lmAgv1jA/viewform?usp=sf_link
2. Participants must complete the following information in the given registration link:
Email
Full Name
School
Address
D. Documentation
Each team must record their progress from raw materials to finished product.
A 3-minute to 5-minute documentation video must be submitted eight (8) days prior to the
event.
A 3-minute to 5-minute final entry video must be submitted five (5) days prior to the
event.
Each team must send a picture of their final design.
E. Final Video
Functionality 50%
Creativity 25%
Presentation 15%
Aesthetics 10%
Total 100%
G. Submission