Professional Documents
Culture Documents
Modification notes
3.3.08 After pressing in the bearing bushing (4) caulk this on each Step 6
side 4 times towards the stabilizer lug (arrows), added.
58 mm 652 589 00 33 01
60 mm 950 589 02 33 00
65 mm 652 589 00 33 02
75 mm 950 589 01 33 00
Removing
1 Screw the threaded sleeve (2) into the hollow cylinder (1) and screw onto the
bearing bushing with the threaded spindle and suitable thrust piece for pressing out
at the bearing bushing.
2 Connect the hydraulic hose to the hydraulic pump and hollow cylinder (1) and
pull out the bushing in the direction of the arrow
W32.35-0002-01
Install
3 Insert bearing bushing (4) and thrust piece for pressing (6) into the conical sleeve
(5).
4 Attach hollow cylinder (1) and conical sleeve (5) to the stabilizer bar and tighten
with the threaded spindle (7) and hexagon nut (8).
Always attach the conical sleeve (5) with the bearing bush (4) on the countersunk side
of the stabilizer bar.
W32.35-1035-01
© Daimler AG, 10/6/20, L/09/17/X, ar32.35-w-2210-04a, Remove/install bearing bushing at stabilizer bar Page 1 of 2
MODEL 374, 375, 655, 656, 657, 658, 659, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958
5 Connect hydraulic hose to the hydraulic pump and hollow cylinder (1) and draw
in the bushing.
Through the cutout (arrow) in the conical sleeve ( 5) check whether the bearing
bushing is pressed in fully.
W32.35-0004-01
6 After pressing in the bearing bushing (4) caulk this on each side 4 times towards the
stabilizer lug (arrows).
W32.35-1042-01
© Daimler AG, 10/6/20, L/09/17/X, ar32.35-w-2210-04a, Remove/install bearing bushing at stabilizer bar Page 2 of 2
MODEL 374, 375, 655, 656, 657, 658, 659, 930, 932, 933, 934, 940, 942, 943, 944, 950, 952, 953, 954, 957, 958