Professional Documents
Culture Documents
1. Lifting capacities does not exceed 75% of tipping load or 87% of hydraulic lifting capacity.
Lift capacities marked with an asterisk (*) are limited by hydraulic capacity.
2. Lift capacities are based on lifting over side and with machine standing on level, firm and uniform ground.
The lift point is assumed to be below the bucket pin.
3. Weight of all lifting accessories must be deducted from the above lift capacities.
4. Never exceed any load greater than the lift capacities at their respective lift point radius and height.
Safe operation of equipment must be adhered to at all times.
5. For excavator with boom swivel function, the boom must be rotated to 0 degree.
6. For excavator with two piece boom, similar configuration can be reached with different positions of the equipment. This chart gives the maximum figures that could be
achieved.
7. The lift capacities will supersede those of the manufacturer and applies to the above machine as originally manufactured and equipped by its manufacturer and the dealer.