This document summarizes a 10th grade student's radar system project built using TinkerCad. The student named Krishna Bansal used an Arduino UNO board to connect components including an ultrasonic sensor, buzzer, servo motor, and LCD display. The ultrasonic sensor detects obstacles by transmitting and receiving ultrasonic rays. When an obstruction is detected, the Arduino triggers the buzzer and LCD display to alert the user and measure the distance to the object. The servo motor rotates the ultrasonic sensor to allow detection in all directions. Coding was used to program the Arduino board to control the overall functioning of the radar system.
This document summarizes a 10th grade student's radar system project built using TinkerCad. The student named Krishna Bansal used an Arduino UNO board to connect components including an ultrasonic sensor, buzzer, servo motor, and LCD display. The ultrasonic sensor detects obstacles by transmitting and receiving ultrasonic rays. When an obstruction is detected, the Arduino triggers the buzzer and LCD display to alert the user and measure the distance to the object. The servo motor rotates the ultrasonic sensor to allow detection in all directions. Coding was used to program the Arduino board to control the overall functioning of the radar system.
This document summarizes a 10th grade student's radar system project built using TinkerCad. The student named Krishna Bansal used an Arduino UNO board to connect components including an ultrasonic sensor, buzzer, servo motor, and LCD display. The ultrasonic sensor detects obstacles by transmitting and receiving ultrasonic rays. When an obstruction is detected, the Arduino triggers the buzzer and LCD display to alert the user and measure the distance to the object. The servo motor rotates the ultrasonic sensor to allow detection in all directions. Coding was used to program the Arduino board to control the overall functioning of the radar system.
GRADE-10 HERCULES ROLL NO:15 TOPIC: RADAR SYSTEM USING TINKER CAD
LINK FOR SIMULATION: https://www.tinkercad.com/things/fT5k6K3E7C5-copy-of-radar-
system/editel?sharecode=uQXOtx5ETpTH2wnLC4q8FWhHTthTiSXhupO7-T0EOpI FUNCTIONS OF COMPONENTS Arduino UNO is a mother board of the circuit and it connects all the circuits with each other and work efficiently. Ultrasonic Sensor receives and transmits the signal in one directions in the form of ultrasonic rays which when finds an obstructions sends signal to Arduino and then it beeps the buzzer which then help the user to detect the motion and the servo is used to rotate the ultrasonic sensor so that it passes signal to all the directions. Next comes the LCD display which helps to measure the distance from which the object is far away and this can be used by any individual to detect the obstacle. And final and the main part is to feed the Arduino board with codes which is when fed up helps the Arduino work. THANK YOU