Professional Documents
Culture Documents
to configure my RE200/RE210 via Web GUI to extend an existing wireless network’s coverage? TPLink
1. Log into the Web GUI of RE200 using its default IP: 192.168.0.254 or its domain name: tplinkextender.net or tplinkrepeater.net.
3. Now your RE200 will scan all the wireless networks around. Since RE200 is a dual band Ranger Extender, it’ll scan and conĪgure Wi-Fi 2.4G Īrst, then sca
http://www.tplink.com/us/faq702.html 1/5
4/30/2017 How to configure my RE200/RE210 via Web GUI to extend an existing wireless network’s coverage? TPLink
Then please choose the wireless network you want to extend, click “Next”.
4. Now input the password of the wireless network you want to extend, and click “Next”.
Note:
1. If you choose “Copy from Main Router/AP”, your RE200 will have the same Wi-Fi name as your main Router/AP. In this way you can set up a roaming n
switch to the wireless network with the better signal strength either from your main Router/AP or your RE200. However, the roaming experience will be
For more detail information about “roaming”, please refer to: www.tp-link.com/en/FAQ-592.html.
2. If you choose “Customize”, your RE200 will have a diĨerent Wi-Fi name. It will be xxx_EXT(xxx is the Wi-Fi name of your main Router/AP) by default, bu
In this way you can’t experience “roaming network” but you can manually choose to connect to either Wi-Fi from your main Router/AP or RE200 accord
wireless clients get.
5. Now we can conĪgure Wi-Fi 5G, it’s the same step as 2.4G.
http://www.tplink.com/us/faq702.html 2/5
4/30/2017 How to configure my RE200/RE210 via Web GUI to extend an existing wireless network’s coverage? TPLink
Note:
If your main Router/AP is a single band (2.4G) Router/AP, you can still use RE200 to extend your wireless network. For more details about RE200’s applicatio
to: DiĨerent Application Scenarios to use the RE200
6. Here we can review all the settings we made just now, click “Finish” if it’s ok.
7. Now RE200 will reboot itself to make all settings take eĨect.
http://www.tplink.com/us/faq702.html 3/5
4/30/2017 How to configure my RE200/RE210 via Web GUI to extend an existing wireless network’s coverage? TPLink
After the reboot, we need to check whether the settings take eĨect, which is to check whether your RE200 has successfully been connected to your main
successfully. There are two methods:
1. Connect your PC to your Ranger Extender (RE200/RE210) via an Ethernet cable, and check whether your PC can go to Internet successfully.
2. Check the wireless signal LED light of your Ranger Extender (shown as the pictures below). If the 2.4G and 5G wireless signal LED are on, it means
successfully connected to the main Router!
Note: If the wireless signal LED is still oĨ, it means you haven’t conĪgured your RE200 correctly. In this situation, please repeat the steps above again. If the
to contact TP-Link tech support.
8. Then you can put RE200/RE210 in a proper place where you want to extend the wireless network’s coverage, and enjoy the extended wireless network.
Yes No
About Us Press
http://www.tplink.com/us/faq702.html Partners Join TP-Link Community Follow Us 4/5
4/30/2017 How to configure my RE200/RE210 via Web GUI to extend an existing wireless network’s coverage? TPLink
About Us Press Partners Join TP-Link Community Follow Us
Corporate Pro le News Partner Program
Email Address Sign Up
Contact Us Awards Training & Certi cations
Careers at TP-Link Security Advisory
Privacy Policy
United States / English Copyright © 2017 TP-Link Technologies Co., Ltd. All rights reserved.
http://www.tplink.com/us/faq702.html 5/5