Heat is given from the bottom and water boils in two chambers. There are different capacities of storing water. Usually 220 to 400 litres of water will be the storage capacity. There are two chambers in the boiler. ( Inside design attached) There is no water saving option in this boiler. Water also cannot be changed online After cooking we need to fill the water manually. For heating the cold water, more fuel is required This is also huge in size weighting about 1500 k.g. Many of the Locations are in the first floor; we cannot use this water tube boiler. Large size is required for outer shell. Steam generation need to stopped while refilling the water
Tubular boiler will have tubes inside the boiler
This will have more efficiency , as the heat touches all part of water very fast Online filling of water. There is no limitation of water filling, any amount of water can be circulated and steam can be generated This is light weight and more advanced When one drop of water is used for steam, next water drop will enter the system automatically. This will help to reduce the time required for heating the water Effectively save water and fuel Can be relocated easily When Water Tube boiler takes long time for cooking, this boiler will help to generate as much steam require for the system