Professional Documents
Culture Documents
烤版机英文说明书 - 副本
烤版机英文说明书 - 副本
Operation Manual
ATTENTION
This manual is subject to international copyright laws.
Unauthorized publication of the same, whether partial or
complete, will be persecuted according to the law.
1
General Description
Technical Specifications
2
Electronic currency: 35A Peak value 60A
Preparation
(1) Space
Superluck plate baking oven should be put in the stable floor. To
better operate and maintain, there should be 600mm diameter
space around the oven.
(2)Ventilation
In the process of plate baking, the oven may outlet some
peculiar smell, which may harm human health. So the operating
room must be equipped with ventilation system. The ventilation
should complete at least ten air circles per hour. And the
ventilation system should be independent to avoid cross
pollution.
(3) Dust prevention
The operating room should be dust free.
(4)Temperature and humidity
The temperature in the operating room should be kept at 18-
29℃. The relative humidity should be within 40% to 60%.
(5)Power
The operating room should be equipped with 380VAC50-60HZ
three phases four lines (30A) power. The power should be
3
independent with proper electrical grounding. If the power
cannot be kept with in 360V-390V, voltage stabilizer should be
used.
Unpack
Testing
4
voltage and make sure the voltage is stable. The machine should
be connected to an independent power.
(5) Check the electronic control box and secure all the parts
(6) Clean the oven
Clean the surface and inside of the oven with wet cloth. (do this
only when machine is cooled down)
(7) Start the machine
Operation
5
(4) When the baking time is over, the machine will alert. Then
the operator should switch off the start button and then switch
off the fan. After that, the plate can be taken out.
2. Preheating Switch
7. Power Switch
8. Power Light
6
10. Baking Timer Light A
7
Trouble Shooting
(1) bad baking equation over the place – check the heating and
fan
(2) the temperature meter doesn’t work – check the sensor and
temperature controller
8
9
circuit diagram
10