Professional Documents
Culture Documents
Gabion Retaining Wall Details Oregon
Gabion Retaining Wall Details Oregon
1ƒ "
or stiffeners not required
1"
in interior cells.
Outside cells
Internal connecting wires
a
Before closure After Closure
OVERLAPPING FASTENER*
a
a = 12"
1…"
a
Wire diameter =„"
Outside cells a a a
Corner cell
1‡ "
See details below.
ƒ "
Crimped
‹" end of 3"
TYPICAL PLAN FOR INTERNAL CONNECTING WIRES joint 1•"
18"
B
2010
end of
*Use for basket assembly only.
joint
Diaphragm
Internal connecting a
GABION BASKET TYING DETAIL
ALTERNATE GABION JOINT FASTENERS
dgn
36"
wires (For tying purposes only. See Dwg.
(FASTENER DIMENSIONS NOMINAL)
2000.
a
det
a "
36 Single
Office practice note:
a loop
(Do not include on contract drawing)
e
" c Single half-hitch
a 36 a
a F locked loop.
a t Double loop
36 a n This is not a standard drawing.
" a o
a " These are standard gabion details required
36 Fr a = 12"
by ODOT.
Include this sheet in the contract plans if
Optional stiffeners not shown gabions are included as an acceptable retaining
in these 2 cells for clarity. wall option. ‘"
Continuous tie
wire to next single Tie wire
Crimp hook
Tie wires shall encompass
closed.
3 vertical and 2 horizontal
strands of the welded fabric.
OPTIONAL STIFFENER CONNECTION
FOR WELDED WIRE GABION BASKETS
WELDED WIRE BASKETS
DET 2000